HOME   Cart(0)   Quotation   About-Us Tax PDFs Standard-List Powered by Google www.ChineseStandard.net Database: 189759 (29 Sep 2024)

NB/SH/T 0824-2010 English PDF

NB/SH/T 0824-2010 (NB/SH/T0824-2010, NBSHT 0824-2010, NBSHT0824-2010)
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
NB/SH/T 0824-2010English319 Add to Cart 3 days [Need to translate] Standard test method for determination of additive elements in lubricating oils by inductively coupled plasma atomic emission spectrometry Valid NB/SH/T 0824-2010
Standards related to: NB/SH/T 0824-2010

BASIC DATA
Standard ID NB/SH/T 0824-2010 (NB/SH/T0824-2010)
Description (Translated English) Standard test method for determination of additive elements in lubricating oils by inductively coupled plasma atomic emission spectrometry
Sector / Industry Energy Industry Standard (Recommended)
Classification of Chinese Standard E34
Classification of International Standard 75.100
Word Count Estimation 12,146
Date of Issue 2010-05-01
Date of Implementation 2010-10-01
Quoted Standard GB/T 4756; GB/T 17476; SH/T 0172; SH/T 0631; ASTM D4307; ASTM D6299
Adopted Standard ASTM D4951-2006, MOD
Drafting Organization China Petroleum & Chemical Corporation Lubricants R & D (Shanghai) Center
Administrative Organization China Petroleum & Chemical Corporation - Research Institute
Regulation (derived from) National Energy Board Notice No. 1 of 2010
Summary This standard applies to the determination of unused lubricating oil additives and compound barium, boron, calcium, copper, magnesium, molybdenum, phosphorus, sulfur and zinc content. 1. 2 This precision applies in a solvent to 1% to 5% by mass diluted samples. 1. 3 Precision table shows the concentration range studied in the laboratory sample concentration range between, serve also applicable to the concentrations above and below the precision range of concentrations given in the table of the sample. The lower limit of the concentration can be determined depending on the sensitivity of the instrument and the sample dilution factor, the upper limit of the concentration can be determined depending on the highest concentration of the calibration curve and the sample dilution factor. 1. 4 at a wavelength of 180nm can be made at the instrument can measure sulfur content. 1. 5 standard uses SI units. 1. 6 standard involving certain hazardous materials, operations and equipment, but not for all safety related to this issue are recommendations. Therefore. Before the user of this standard is necessary to establish appropriate safety and protective measures, and determine the appropriate management system.

...