|
US$259.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
LY/T 2714-2016: Wood-plastic composite door casing
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| LY/T 2714-2016 | English | 259 |
Add to Cart
|
3 days [Need to translate]
|
Wood-plastic composite door casing
| Valid |
LY/T 2714-2016
|
PDF similar to LY/T 2714-2016
Basic data | Standard ID | LY/T 2714-2016 (LY/T2714-2016) | | Description (Translated English) | Wood-plastic composite door casing | | Sector / Industry | Forestry Industry Standard (Recommended) | | Classification of Chinese Standard | B70 | | Classification of International Standard | 79.060 | | Word Count Estimation | 11,155 | | Date of Issue | 2016-07-27 | | Date of Implementation | 2016-12-01 | | Regulation (derived from) | State Forestry Administration Announcement No.17 of 2016; Industry Standard Announcement No.16 of 2016 (No.204) | | Issuing agency(ies) | State Forestry Administration | LY/T 2714-2016: Wood-plastic composite door casing---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Wooden plastic door sets)
ICS 79.060
B70
People's Republic of China Forestry Industry Standard
Wood plastic door line
Released on.2016-07-27
Implementation of.2016-12-01
State Forestry Administration released
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
Please note that some of the contents of this document may involve patents. Publication of this document
The organization is not responsible for identifying these patents.
This standard is proposed and managed by the National Forestry Biomass Materials Standardization Technical Committee (SAC/TC416).
This standard was drafted. International Bamboo and Rattan Center, Huazhong Agricultural University, Hubei Ainin Wood Plastic Products Co., Ltd., Hubei Sanmu Wood Plastic Technology
Limited company.
The main drafters of this standard. Wang Hankun, Xiong Hanguo, Yu Yan, Fei Peng, Ren Dan, Song Jianjun, Gui Sibin, Cai Jie, Tan Jun.
Wood plastic door line
1 Scope
This standard specifies the terms and definitions, requirements, inspection methods, inspection rules, and marking, packaging, transportation and storage of wood-plastic door line.
This standard is applicable to woody plant materials such as wood, bamboo and crop straw as fillers or reinforcing materials (minimum proportion)
10%), based on thermoplastic polymer plastics (PVC, PP, PE, etc.), after molding, water-based or oily plastic film (or no film)
The wood-plastic door line for the decorative wire covered by the door frame.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 2828.1-2012.Sampling procedures for sampling by sampling - Part 1 . Batch-by-batch inspections by Retrieving Quality of Acceptance (AQL)
plan
GB/T 15102-2006 impregnated film paper veneer wood-based panel
GB/T 17657-2013 Test method for physical and chemical properties of wood-based panels and veneered panels
GB/T 19367-2009 Determination of the size of wood-based panels
GB/T 24137-2009 wood plastic decorative board
GB/T 24508-2009 wood plastic floor
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Wood plastic door line wood-plasticcompositedoorcasing
Woody botanical raw materials such as wood, bamboo, crop straw, etc. are used as fillers or reinforcing materials (minimum addition ratio of 10%), with high thermoplasticity
Molecular plastics (PVC, PP, PE, etc.) are used as substrates, which are formed by processes such as molding, water-based or oily film-coated film (or film-free).
Decorative wire covered in the door frame.
3.2
Perviousspotsofcoveringlayer
Defects appearing on the surface of the substrate due to local missing or too thin coating.
3.3
Crashing dents
The product causes a serrated defect such as tearing of the edge of the material during the cutting process.
3.4
Bubbling blisters
The surface of the product contains abnormal protrusions caused by gas.
3.5
Drum kit inclusions
The surface of the product contains abnormal protrusions caused by solid objects.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of LY/T 2714-2016_English be delivered?Answer: Upon your order, we will start to translate LY/T 2714-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of LY/T 2714-2016_English with my colleagues?Answer: Yes. The purchased PDF of LY/T 2714-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|