HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

JT/T 475-2020 English PDF

US$419.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
JT/T 475-2020: Trailer axle
Status: Valid

JT/T 475: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
JT/T 475-2020English419 Add to Cart 4 days [Need to translate] Trailer axle Valid JT/T 475-2020
JT/T 475-2002English70 Add to Cart 0--9 seconds. Auto-delivery Trailer axle Obsolete JT/T 475-2002

PDF similar to JT/T 475-2020


Standard similar to JT/T 475-2020

GB/T 39015.2   GB/T 13881   JT/T 475   

Basic data

Standard ID JT/T 475-2020 (JT/T475-2020)
Description (Translated English) Trailer axle
Sector / Industry Highway & Transportation Industry Standard (Recommended)
Classification of Chinese Standard T73
Word Count Estimation 18,196
Date of Issue 2020-07-31
Date of Implementation 2020-11-01
Older Standard (superseded by this standard) JT/T 475-2002
Regulation (derived from) Announcement No. 63 (2020) of the Ministry of Transport
Issuing agency(ies) Ministry of Transport
JT/T 475-2002 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 43.080.10 T 73 Registration No.. 10297-2002 Replacing JT/T 3139.1-1989 and JT/T 3139.2-1989 Trailer Axle ISSUED ON. APRIL 26, 2002 IMPLEMENTED ON. JULY 1, 2002 Issued by. Ministry of Communications of the People's Republic of China

Table of Contents

Foreword ... 3  1 Scope ... 4  2 Normative References ... 4  3 Types ... 4  4 Basic Parameters of Trailer Axles ... 5  5 Technical Requirements ... 6  6 Bench Test ... 7  7 Inspection Rules ... 10  8 Others ... 11 

Foreword

This Standard has been made by combining and revising JT/T 3139.1-1989 “Trailer Axle Assembly – Basic Parameter Series” and JT/T 3139.2-1989 “Trailer Axle – General Specifications”. Significant changes have been made on the technical content of the original standards. this Standard deletes the torsional strength test for trailer axle, improves the technical specifications of bending fatigue life, and adds the technical requirements and test methods for wheel brake. JT/T 3139.1-1989 and JT/T 3139.2-1989 shall be abolished from the implementation date of this Standard. This Standard was proposed by and shall be under the jurisdiction of the Highway Department of the Ministry of Communications. The main drafting organization of this Standard. Ministry of Communications Highway Scientific Research Institute. The organization participating in the drafting of this Standard. Guangdong Fuwa Engineering Group Ltd. The main drafters of this Standard. Nie Yuming, Liu Jiannong, Wu Zhiqiang and Huang Bohua. The standard JT/T 3139 replaced by this Standard was first issued in June, 1989. Trailer Axle

Scope

This Standard specifies the types, basic parameters, technical requirements, test methods and inspection rules for trailer axles (including wheel brake assembly and chamber support). This Standard applies to the axles used in the freight trailers with manufacturer's maximum total mass not exceeding 8 t.

Normative References

The provisions in following documents become the provisions of this Standard through reference in this Standard. For dated references, the subsequent amendments (excluding corrigendum) or revisions do not apply to this Standard, however, parties who reach an agreement based on this Standard are encouraged to study if the latest versions of these documents are applicable. For undated references, the latest edition of the referenced document applies. JB/T 5000.3 Heavy Mechanical General Techniques and Standards – Part 3. Welding QC/T 239 Performance Requirements for Truck & Bus Brakes QC/T 479 Trucks and Buses Brake Bench Test Method QC/T 484 Automobile Paint Coating 3 Types 3.1 The trailer axles can be divided into two types in accordance with the tyre mounting methods, including the single-tyre S (single) type and the double-tyre D (double) type. Load slowly from zero to the maximum test load. Record the displacement of each measuring point by 8 levels (the displacement under the rated shaft load and the maximum test load must be recorded). Each axle shall be tested three times. At the beginning of each test, adjust the dial gauge (or displacement sensor) to zero. 6.3.4.2 Strength test After the vertical bending rigidity test, remove the dial gauge (or displacement sensor) at each measuring point and load it continuously until the axle breaks. Record the load at that time (i.e. the axle's failure load). 6.3.5 Data processing 6.3.5.1 Calculate the numerical value of the ratio between the maximum displacement and track under the full load of the axle, draw the displacements at all measuring points under the full axle load and maximum test load, and connect these points into a polyline. 6.3.5.2 Calculate the axle bending backup coefficient Kn = Pn / P In the formula. Pn — vertical bending failure load, in kN; P — rated axle load, in kN. 6.3.6 Result processing Analyze the test sample data and write the test report or test result notice. 6.4 Vertical bending fatigue life test 6.4.1 Test objective It is to determine the vertical bending fatigue life of axles. 6.4.2 Test apparatus They include hydraulic fatigue tester, strain gauge, oscilloscope, strain foil and so on. 6.4.3 Test procedure 6.4.3.1 Mounting The sample mounting method is the same as that in 6.3.3.1. 6.4.3.2 Loading Make the loading direction perpendicular to the axle centre-line, preload to the maximum test load and repeat three times before unloading.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JT/T 475-2020_English be delivered?

Answer: Upon your order, we will start to translate JT/T 475-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JT/T 475-2020_English with my colleagues?

Answer: Yes. The purchased PDF of JT/T 475-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version JT/T 475-2020?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JT/T 475-2020 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.