HOME   Cart(1)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

JJG 571-2004 English PDF

US$519.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJG 571-2004: Verification Regulation of Reading Microscope and Measuring Microscope
Status: Valid

JJG 571: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
JJG 571-2004English519 Add to Cart 4 days [Need to translate] Verification Regulation of Reading Microscope and Measuring Microscope Valid JJG 571-2004
JJG 571-1988English479 Add to Cart 4 days [Need to translate] Verification Regulation of Measuring Microscope Obsolete JJG 571-1988

PDF similar to JJG 571-2004


Standard similar to JJG 571-2004

JJG 818   JJG 517   JJG 0061   JJG 658   JJG 601   JJG 566   

Basic data

Standard ID JJG 571-2004 (JJG571-2004)
Description (Translated English) Verification Regulation of Reading Microscope and Measuring Microscope
Sector / Industry Metrology & Measurement Industry Standard
Classification of Chinese Standard A52
Classification of International Standard 17.040
Word Count Estimation 20,233
Date of Issue 2004-09-21
Date of Implementation 2005-03-21
Older Standard (superseded by this standard) JJG 571-1988% JJG 904-1996
Quoted Standard JJF 1001; JJF 1059; JJF 1094; JB/T 2369; JB/T 9339
Regulation (derived from) 2004 technical regulations issued by national metrology (industrial measurement 2005 Volume 15, Issue 1)
Issuing agency(ies) State Administration of Quality Supervision, Inspection and Quarantine
Summary This standard applies to indexing is not greater than 0. 01mm, 8mm measuring range upper limit to the reading microscope, and dividing the value is not greater than 0. 01mm, measuring range: Portrait of (0 ~ 50) mm, transverse (0 ~ 13) mm The initial verification of measuring microscope, follow-up testing and use test.

JJG 571-2004: Verification Regulation of Reading Microscope and Measuring Microscope

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Verification Regulation of Reading Microscope and Measuring Microscope National Metrology Verification Regulations of the People's Republic Reading, measuring microscope Released on.2004-09-21 2005-03-21 implementation The General Administration of Quality Supervision, Inspection and Quarantine issued Replace JJG 904-1996 Replace JJG 571-1988 This regulation was approved by the General Administration of Quality Supervision, Inspection and Quarantine on September 21,.2004, and It will take effect on March 21,.2005. Focal Point. National Geometric Quantity Engineering Measurement Technology Committee Main drafting unit. China Institute of Metrology Henan Institute of Metrology and Testing Participated in the drafting unit. The 704 Institute of China Aviation Industry First Group Corporation This regulation entrusts the National Geometric Quantity Engineering Parametric Measurement Technical Committee to explain The main drafters of this procedure. Zhu Xiaoping (China Institute of Metrology) Zhang Weidong (Henan Province Metrology and Testing Institute) Zhang Heng (China Institute of Metrology) Participate in the drafters. Zhao Xinli (The 704 Institute of China Aviation Industry First Group Corporation) Wang Weichen (China Institute of Metrology)

table of Contents

1 Scope (1) 2 Citations (1) 3 Overview (1) 4 Metrological performance requirements (2) 4.1 Displacement caused by the radial force of the circular table (2) 4.2 Parallelism of the movement direction of the glass table and the longitudinal and lateral slides (2) 4.3 Straightness of vertical and horizontal slide movement (2) 4.4 Mutual verticality of vertical and horizontal slide movement (2) 4.5 The verticality of the microscope lifting direction to the glass table (2) 4.6 Indication error of round table (2) 4.7 Magnification error of the microscope (2) 4.8 Return error (2) 5 General technical requirements (3) 5.1 Appearance (3) 5.2 Interaction of various parts (3) 5.3 Relative position between the lines of the microscope (3) 5.4 Prism seat rotation causes image displacement (4) 5.5 Coincidence between the center of the spiral reticle and the center of rotation (4) 6 measuring instrument control (4) 6.1 Verification conditions (4) 6.2 Verification project (4) 6.3 Verification method (4) 6.4 Processing of verification results (9) 6.5 verification period (9) Appendix A Analysis of the Uncertainty of the Results of the Errors in the Reading Microscope (10) Appendix B Uncertainty Analysis of Measurement Results of Measurement Microscope Errors (12) Appendix C Verification device for verifying the coincidence of the spiral dividing center with its center of rotation (14) Appendix D Verification certificate and verification result notice page format (15) Reading and measuring microscope verification procedures

1 Scope

This procedure is applicable to reading microscopes with a division value not greater than 0.01 mm and an upper measurement range up to 8 mm, and The division value is not more than 0.01mm, and the measurement range is. measurement in the longitudinal direction (0~50) mm and the lateral direction (0~13) mm. The first verification, subsequent verification and in-use inspection of the microscope.

2 Citations

This procedure refers to the following documents. JJF1001-1998 General measurement terms and definitions JJF1059-1999 Measurement Uncertainty Evaluation and Representation JJF1094-2002 Measuring instrument characteristic evaluation JB/T 2369-1993 reading microscope JB/T 9339-1999 Measuring microscope When using this procedure, care should be taken to use the current valid version of the above cited documents.

3 Overview

Reading microscopes and measuring microscopes (hereinafter referred to as microscopes) are optical mechanical length measuring instruments, readings The microscope is mainly used as the aiming and positioning reading device in the length measuring instrument, and can also be used for the scribe line width, spacing, etc. Measurement of the length; the main purpose of the measuring microscope is to measure the part by the image method in Cartesian or polar coordinates. Shape size. The shape of the reading microscope is shown in Figure 1, Figure 2, Figure 3. The shape of the measuring microscope is shown in Figure 4. Shown. Figure 1 One of the outlines of the reading microscope 1-objective lens; 2-measuring differential scrimmage box; 3-eyepiece; 4-micrometer knob; 5-light Figure 2 Figure 2 of the reading microscope 1-objective lens; 2-micrometer knob; 3-eyepiece; 4-measuring differential scrimmage box; 5-zero adjustment knob; 6-light

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JJG 571-2004_English be delivered?

Answer: Upon your order, we will start to translate JJG 571-2004_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JJG 571-2004_English with my colleagues?

Answer: Yes. The purchased PDF of JJG 571-2004_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version JJG 571-2004?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JJG 571-2004 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.