HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

JJG 566-2010 English PDF

US$369.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJG 566-2010: Verification regulation of vernier caliper for coil of generator
Status: Valid

JJG 566: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
JJG 566-2010English369 Add to Cart 3 days [Need to translate] Verification regulation of vernier caliper for coil of generator Valid JJG 566-2010
JJG 566-1996English319 Add to Cart 3 days [Need to translate] Verification Regulation of Vemiter Caliper for Coil of Generator Obsolete JJG 566-1996
JJG 566-1989EnglishRFQ ASK 3 days [Need to translate] Electromagnetic Flowmeter Obsolete JJG 566-1989

PDF similar to JJG 566-2010


Standard similar to JJG 566-2010

JJG 818   JJG 517   JJG 0061   JJG 658   JJG 741   JJG 601   

Basic data

Standard ID JJG 566-2010 (JJG566-2010)
Description (Translated English) Verification regulation of vernier caliper for coil of generator
Sector / Industry Metrology & Measurement Industry Standard
Classification of Chinese Standard A52
Classification of International Standard 17.040
Word Count Estimation 16,134
Date of Issue 2010-05-11
Date of Implementation 2010-11-11
Older Standard (superseded by this standard) JJG 566-1996
Quoted Standard JJF 1001-1998; JJF 1130-2005; GB/T 21389-2008
Regulation (derived from) AQSIQ Announcement No. 50 of 2010
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine
Summary This standard applies to indexing is 0. 02mm and 0. 05mm, measuring range (0 ~ 60) mm vernier motor coil initial verification, testing and use of follow-up inspection.

JJG 566-2010: Verification regulation of vernier caliper for coil of generator

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Verification regulation of vernier caliper for coil of generator State verification procedures People's Republic of China Motor coil vernier caliper Issued on. 2010-05-11 2010-11-11 implementation The State Administration of Quality Supervision, Inspection and Quarantine released Motor coil vernier caliper test procedures Calip Replacing JJG 566-1996 The regulations by the State Administration of Quality Supervision, Inspection and Quarantine approved on May 11, 2010, and from From November 11, 2010 into effect. NFP. National Engineering Geometrical Parameters Measurement Technology Committee Main drafting unit. Dongfang Electric Group, Dongfang Electrical Machinery Co., Ltd. Participated in the drafting unit. China Testing Technology Research Institute This procedure works commissioned by the National geometric parameter measurement technology committee responsible for the interpretation The main drafters of this procedure. Liu Jun (Dongfang Electric Group, Dongfang Electrical Machinery Co., Ltd.) Feng Xiao force (Dongfang Electric Group, Dongfang Electrical Machinery Co., Ltd.) Drafters participate. Chen Yongkang (China Testing Technology Research Institute)

table of Contents

1 Scope (1) 2. Referenced Documents (1) 3 Overview (1) 4 metering performance requirements (1) Force measuring 4.1 (1) 4.2 scale mark width and width difference (2) 4.3 Measuring the surface roughness of the surface (2) 4.4 Measuring surface flatness (2) 4.5 Zero error (2) 4.6 Indication error (3) 5 General technical requirements (3) 5.1 Appearance (3) 5.2 Interaction of each part (3) 5.3 vernier mark edge surface to surface from the main scale marks (3) 6 control of measuring instruments (3) 6.1 Verification condition (3) 6.2 test items and test equipment (3) 6.3 Verification Methods (4) Processing 6.4 Verification Results (4) 6.5 test cycle (6) Appendix A motor coil vernier caliper measuring indication error Evaluation of Uncertainty (7) Appendix B calibration certificate and test results in the notice page format (11) Motor coil vernier caliper test procedures

1 Scope

The order applies to indexing is 0.02mm and 0.05mm, measuring range (0 ~ 60) mm motor coil Vernier caliper initial verification, subsequent verification and in-service inspection.

2 Citations

The regulations cited in the following documents. JJF1001-1998 common measurement terms and definitions JJF1130-2005 geometric measurement equipment uncertainty Guide GB/T 21389-2008 cursor, with table and several Caliper When using this procedure, it should pay attention to using the currently valid version of the documents cited.

3 Overview

Motor coil vernier caliper for measuring various large motor coil dimensions, its shape shown in Figure 1. Figure 1 a schematic view of the motor coil shape vernier caliper 1- foot frame; 2- brake screws; 3- upstream ruler; the 4- main scale; 5- fastening screws; 6- jaws; 7- handle; 8- downstream ruler; 9- Master scale; 10- measuring force adjustment means

4 metering performance requirements

4.1 Force Load motor coil vernier caliper does not exceed the range specified in Table 1.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JJG 566-2010_English be delivered?

Answer: Upon your order, we will start to translate JJG 566-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JJG 566-2010_English with my colleagues?

Answer: Yes. The purchased PDF of JJG 566-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version JJG 566-2010?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JJG 566-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.