HOME   Cart(5)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

JJG 343-2012 English PDF

US$809.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJG 343-2012: Verification Regulation o f Plain Limit Gauges
Status: Valid

JJG 343: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
JJG 343-2012English809 Add to Cart 6 days [Need to translate] Verification Regulation o f Plain Limit Gauges Valid JJG 343-2012
JJG 343-1996English439 Add to Cart 4 days [Need to translate] Verification Regulation of Smooth Limit Gauge Obsolete JJG 343-1996
JJG 343-1984EnglishRFQ ASK 3 days [Need to translate] (Chinese Industry Standard) Obsolete JJG 343-1984

PDF similar to JJG 343-2012


Standard similar to JJG 343-2012

JJG 517   JJG 5   JJG 0061   JJG 658   JJG 741   JJG 601   

Basic data

Standard ID JJG 343-2012 (JJG343-2012)
Description (Translated English) Verification Regulation o f Plain Limit Gauges
Sector / Industry Metrology & Measurement Industry Standard
Classification of Chinese Standard A52
Classification of International Standard 17.040
Word Count Estimation 35,312
Older Standard (superseded by this standard) JJG 343-1996
Quoted Standard GB/T 1800.1-2009; GB/T 1957-2006
Regulation (derived from) AQSIQ Announcement No. 45 of 2012
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine
Summary This standard applies to the basic dimensions of the hole and shaft 500mm, tolerance class IT16 IT6 grade to grade proofreading, working smooth limit gauge initial verification, testing and use of follow-up checks.

JJG 343-2012: Verification Regulation o f Plain Limit Gauges

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Verification Regulation of Plain Limit Gauges State verification procedures People's Republic of China Smooth limit gauge Issued on. 2012-03-20 2012-09-20 implementation The State Administration of Quality Supervision, Inspection and Quarantine released Smooth limit gauge test procedures es Replacing JJG 343-1996 NFP. National Engineering Geometrical Parameters Measurement Technology Committee Main drafting unit. Liaoning Provincial Institute of Metrology Participated in the drafting. Guangdong Institute of Metrology This procedure works commissioned by the National geometric parameter measurement technology committee responsible for the interpretation The main drafters of this procedure. Shizuo De (Liaoning Provincial Institute of Metrology) Zhang Ming (Liaoning Provincial Institute of Metrology) Zhang Yu (Liaoning Provincial Institute of Metrology) Drafters participate. Zhang Yong (Guangdong Institute of Metrology)

table of Contents

Introduction (Ⅱ) 1 Scope (1) 2. References (1) 3 terminology and units of measurement (1) 3.1 smooth limit gauge (1) 4 Overview (1) 5 metering performance requirements (2) 5.1 measuring surface roughness of the surface (2) 5.2 gauge the shape and position error (2) 5.3 gauge size (3) 6 General Requirements (5) 7 control of measuring instruments (5) 7.1 test conditions (5) 7.2 Verification Project (6) 7.3 Verification Methods (6) 7.4 Verification Results Processing (9) 7.5 test cycle (9) Appendix A smooth Uncertainty Evaluation Report plug diameter measurements (10) Appendix B proofing plug diameter measurements Uncertainty Evaluation Report (14) Appendix C gauge code, using rules, size and position tolerance zone (18) Basic tolerance values in Appendix D of the hole and the shaft (19) Appendix E-shaped plug full size measuring sample (24) Appendix F test certificates/test results in the notice page and format (25)

Introduction

JJG 343 "smooth limit gauge" prepared to comply JJF1002-2010 "national verification procedures prepared by Regulation The "requirement to JJF1001-2011" common measurement terms and definitions ", JJF1130-2005" geometry measurement The amount of equipment calibration Uncertainty Evaluation Guide ", GB/T 1957-2006" smooth limit gauge technical conditions " GB/T 1800.1-2009 "Geometrical product specifications (GPS) limits and fits - Part 1. Tolerances, partial And the difference with the foundation "as the basis and foundation of JJG 343-1996" smooth limit gauge "subject to revisions. this Alternative procedures JJG 343-1996 "smooth limit gauge", compared with JJG 343-1996 "smooth limit gauge" The main technical changes in addition to editorial changes outside as follows. --- References GB/T 1957-2006 "smooth limit gauge technology" in a given smooth limit gauge Meaning (see 3.1); --- References GB/T 1957-2006 "smooth limit gauge technical conditions" in the smooth limit gauge ruler Inch specification (see Table 2); --- Deletion of the hardness of the technical requirements; --- Full roundness of shape plug gauge, ring gauge roundness, bus straightness, flatness caliper measuring surface, caliper measurement Parallelism is defined as the surface of the unified gauge of form and position errors (see 5.2); --- Revised technical requirements to gauge the shape and position error (see 5.3); --- Added proofing plug technical requirements (see 5.3); --- Increased smooth plug diameter measurements Uncertainty Evaluation Report (see Appendix A); --- Increased proofing plug diameter measurements Uncertainty Evaluation Report (see Appendix B); --- Increasing the gauge of code, using rules, dimensional tolerances and with position (see Appendix C); --- Increasing the numerical aperture of the basic tolerance and shaft (see Appendix D); --- Increasing the calibration certificate and test results in the notice page and format (see Appendix F). JJG 343-1996 "smooth limit gauge" of previously issued as follows. --- JJG 343-1984 "smooth limit gauge." Smooth limit gauge test procedures

1 Scope

The order applies to basic dimensions of the hole and shaft to 500mm, tolerance grade IT6 level to level IT16 proofreading, workers As smooth limit gauge the initial verification, subsequent verification and the use of checks. 2. References This procedure references the following documents. GB/T 1800.1-2009 Geometrical product specifications (GPS) limits and fits - Part 1. Nominal Poor foundation deviations and fits GB/T 1957-2006 smooth limit gauge the technical conditions For dated references, only the dated edition applies to this procedure; undated reference documents Member, the latest edition (including any amendments) applies to this procedure.

3 terminology and units of measurement

JJF1001-2011 "common measurement terms and definitions", GB/T 1957-2006 "smooth limit gauge technology Intraoperative conditions "and as defined in the following terms and definitions apply to this procedure. 3.1 smooth limit gauge plainlimitgauges With a maximum limit size of the hole or shaft or the minimum size limit for the nominal size of a standard measurement surface can reflect control Made the subject hole or shaft boundary conditions of no moment length measuring instruments.

4 Overview

Smooth limit gauge (hereinafter referred to as "gauge") is divided into plug, ring and caliper three categories. Smooth limit plug gauge is used to test the aperture, the measurement surface of the outer cylinder, sphere and the like. Wherein the plug Having a pore size subject to minimum limit size hole through regulation, having a hole with a maximum limit of detection aperture size Only the rules. Ring gauge smooth limit gauge for inspection shaft diameter, the measurement surface within a torus. Wherein the diameter of the ring Having a through-axis inspection regulations limit the size of the largest shaft diameter, shaft diameter has been the subject of an axis with a minimum size limit Only the rules. Caliper is smooth limit gauge for inspection shaft diameter, its surface is measured in two parallel surfaces. Among them, the two measuring surface Pitch having a through-shaft Shaft Inspection Regulations limit the maximum size of the subject having an axis shaft diameter with a minimum size limit Only the rules. Shafts smooth limit gauge the structure shown in Figure 1. Holes in Figure 2 with a smooth structure limit gauges FIG.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JJG 343-2012_English be delivered?

Answer: Upon your order, we will start to translate JJG 343-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JJG 343-2012_English with my colleagues?

Answer: Yes. The purchased PDF of JJG 343-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version JJG 343-2012?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JJG 343-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.