HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

JJG 306-2004 English PDF

US$469.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJG 306-2004: Verification Regulation of 24m Invar Wire
Status: Valid

JJG 306: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
JJG 306-2004English469 Add to Cart 3 days [Need to translate] Verification Regulation of 24m Invar Wire Valid JJG 306-2004
JJG 306-1982English719 Add to Cart 5 days [Need to translate] Verification Regulation of 24m Invar Wire Obsolete JJG 306-1982

PDF similar to JJG 306-2004


Standard similar to JJG 306-2004

JJG 517   JJG 5   JJG 0061   JJG 658   JJG 741   JJG 601   

Basic data

Standard ID JJG 306-2004 (JJG306-2004)
Description (Translated English) Verification Regulation of 24m Invar Wire
Sector / Industry Metrology & Measurement Industry Standard
Classification of Chinese Standard A52
Classification of International Standard 17.040
Word Count Estimation 18,120
Date of Issue 2004-06-04
Date of Implementation 2004-12-01
Older Standard (superseded by this standard) JJG 306-1982
Issuing agency(ies) State Administration of Quality Supervision, Inspection and Quarantine
Summary This standard applies to 24m Yinwa Ji line ruler initial verification, testing and use of follow-up inspection.

JJG 306-2004: Verification Regulation of 24m Invar Wire

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Verification Regulation of 24m Invar Wire National Metrology Verification Regulations of the People's Republic 24m Inwa baseline ruler 24mInvarWire Released on June.2004 Implementation of.2004-12-01 The General Administration of Quality Supervision, Inspection and Quarantine issued Replace JJG 306-1982 This regulation was approved by the General Administration of Quality Supervision, Inspection and Quarantine on June 4,.2004, and Implemented on December 1,.2004. Focal Point. National Geometric Length Measurement Technical Committee Drafted by. China Institute of Metrology This regulation entrusts the National Geometric Length Measurement Technical Committee to explain The main drafters of this procedure. Li Jianshuang (China Institute of Metrology) Tao Xiangqin (China Institute of Metrology) Zhao Yan (China Institute of Metrology)

table of Contents

1 Scope (1) 2 Citations (1) 3 terms (1) 4 Overview (1) 5 Metrological performance requirements (1) 5.1 Linear expansion coefficient of the baseline ruler (1) 5.2 Length of the baseline ruler (1) 6 General technical requirements (1) 6.1 Appearance (1) 6.2 Identification (2) 7 measuring instrument control (2) 7.1 Verification conditions (2) 7.2 Verification project (2) 7.3 Verification method (3) 7.4 Processing of verification results (8) 7.5 Verification cycle (8) Appendix A Verification Data Calculation Example (9) Appendix B Baseline Rule Certificate Internal Page Format (11) Appendix C Principles of Baseline Length Verification (12) 24m Inwa baseline rule verification procedure

1 Scope

This procedure applies to the first verification, subsequent verification and in-use inspection of the 24m watt baseline.

2 Citations

This procedure refers to the following documents. JJF1059-1999 Measurement Uncertainty Evaluation and Representation JJF1001-1998 General measurement terms and definitions JJF1094-2002 Measuring instrument characteristic evaluation GB 16789-1997 Specification for long baseline measurements When using this procedure, care should be taken to use the current valid version of the above cited documents.

3 terms

The linear expansion coefficient of the baseline ruler means that both ends of the ruler are led to the pulley at a specific tension (98N) level and are suspended. The coefficient of linear expansion measured in the case of a chain. The length of the baseline ruler means that at 20 ° C, both ends of the ruler are led to the pulley at a specific tension (98 N) level and In the case of a catenary, the distance between the two ends of the baseline ruler is the same as the line.

4 Overview

The 24m Inwa baseline ruler (hereinafter referred to as the baseline ruler) is wired and strip-shaped, and belongs to the national line pattern verification system. Second-class standard. It serves as the standard length for field verification baselines and is used for baseline measurements in national geodetic control networks. Seismic deformation measurement, precision engineering measurement, etc.

5 Metrological performance requirements

5.1 Linear expansion coefficient of the baseline ruler 5.1.1 For the measurement of the baseline scale than the long baseline, the coefficient of linear expansion should be no more than 0.5 × 10-6 ° C-1. 5.1.2 The baseline expansion coefficient used for other purposes shall be no more than 1×10-6°C-1. 5.1.3 The standard uncertainty of the calibration results of the baseline ruler expansion coefficient shall not exceed 3×10-8°C-1. 5.2 Length of the baseline ruler 5.2.1 The difference between the actual length and the nominal length at 20 °C for measuring the baseline scale over a long baseline should be no more than 5 mm. 5.2.2 The full-length extended uncertainty of the baseline length test results shall not exceed 20 μm (k=3).

6 General technical requirements

6.1 Appearance The base ruler stored on the ruler drum should be neatly and tightly wounded, and there should be no loose or overlapping phenomenon. Baseline ruler should have no plan

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JJG 306-2004_English be delivered?

Answer: Upon your order, we will start to translate JJG 306-2004_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JJG 306-2004_English with my colleagues?

Answer: Yes. The purchased PDF of JJG 306-2004_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version JJG 306-2004?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JJG 306-2004 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.