Powered by Google-Search & Google-Books www.ChineseStandard.net Database: 169760 (Jan 16, 2021)
HOME   Quotation   Tax   Examples Standard-List   Contact-Us   View-Cart

JJG 14-2016

Chinese Standard: 'JJG 14-2016'
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusRelated Standard
JJG 14-2016English409 Add to Cart Days<=3 Non-self-indicating Weighing Instruments Valid JJG 14-2016
JJG 14-2016Chinese20 Add to Cart <=1-day [PDF from Chinese Authority, or Standard Committee, or Publishing House]


Standard ID JJG 14-2016 (JJG14-2016)
Description (Translated English) Non-self-indicating Weighing Instruments
Sector / Industry Metrology & Measurement Industry Standard
Classification of Chinese Standard A53
Word Count Estimation 17,178
Date of Issue 3/3/2016
Date of Implementation 2016-09-03
Older Standard (superseded by this standard) JJG 14-1997
Quoted Standard JJG 99; JJF 1181
Drafting Organization Qingdao Weighing Testing Center, Ningbo Measurement and Testing Institute, Jiangsu Institute of Metrology, Shandong Institute of Metrology
Administrative Organization National Weighing Measurement Technical Committee
Regulation (derived from) Announcement No.26 of the General Administration of Quality Supervision, Inspection and Quarantine
Issuing agency(ies) State Administration of Quality Supervision, Inspection and Quarantine

JJG 14-2016
Non-self-indicating Weighing Instruments
National Metrological Verification Regulation of the People's Republic of China
Non-self-indicating scale
2016-03-03 release
2016-09-03 Implementation
State Administration of Quality Supervision, Inspection and Quarantine issued
Non-self-indicating scale
Verification procedures
Replacing JJG 14-1997
Responsible unit. National Weighing Measurement Technology Committee
Drafting unit. Qingdao Weighing Test Center
Ningbo Institute of Measurement and Testing
Jiangsu Institute of Metrology
Shandong Institute of Metrology
This procedure entrusts the National Weighing Metrology Technical Committee to explain
The main drafters of this procedure.
Yu Xuguang (Qingdao Weighing Test Center)
Yan Jianjun (Ningbo Institute of Measurement and Testing)
Zhao feng (Jiangsu province metrology and scientific research institute)
Ma Kun (Shandong Institute of Metrology)
Participate in the drafters.
Yu Jingfen (Qingdao Weighing Test Center)
Liang Liang (Qingdao Weighing Test Center)
table of Contents
Introduction (II)
1 range (1)
2 References (1)
3 terms and units of measurement (1)
3.1 Terms (1)
3.2 Unit of measurement (1)
4 Overview (2)
5 Measurement performance requirements (2)
5.1 Division of accuracy levels (2)
5.2 Test division value (2)
5.3 The maximum allowable error of the scale (2)
5.4 Repeatability (3)
5.5 partial load (3)
5.6 zero (3)
5.7 Sensitivity (3)
6 General technical requirements (3)
6.1 Safety of measurement (3)
6.2 raising mound (3)
6.3 Metrology and marking of metrological instruments (3)
7 Metering device control (4)
7.1 Standard equipment for testing (4)
7.2 Verification Project (4)
7.3 Inspection of general technical requirements (4)
7.4 Measurement performance test (5)
7.5 Processing of test results (8)
7.6 Verification cycle (8)
Appendix A Verification Record Format (Recommended) (1) (9)
Appendix B Verification Record Format (Recommended) (2) (10)
Appendix C Verification Certificate Page Format (Recommended) (11)
Appendix D Test results Notification page format (recommended) (12)
The JJG 14-1997 "non-self-indicating scale" verification procedures are revised and executed in the preparation format
The JJF1002-2010 "national measurement procedures for the preparation of rules" provisions. Compared with JJG 14-1997, in addition to compilation
Modification of the main changes are the following.
- Added some of the necessary terms related to metrological verification (see 3.1);
- a legal unit of measurement that must be used for non-self-indicating scales (see 3.2);
--- modified the sensitivity requirements (see 5.7);
- Increased protection against deceptive use and protection of parts such as mound, mound, adjustment and other components (see 6.1);
- a list of approved items (see 7.2);
- modified inspection items in use (see 7.2);
- Increased weighing calculation formula (see 7.4.4);
- modified load requirements for repeatability tests (see 7.4.5);
--- delete the partial load test "weighing the rolling load of the scale" of the relevant content;
- the measurement of the lever is removed separately;
--- provide the test record format and test certificate, the results of the notice within the page format (see Appendix A, B,
C, D).
The previous versions of this order are released as follows.
--- JJG 14-1997;
--- JJG 14-1985.
Non - self - indicating scale inspection procedures
1 Scope
This procedure is applicable to the first inspection of non-self-indicating scale (hereinafter referred to as scale) of accuracy level and general accuracy level
Set, follow-up and check in use.
2 reference file
JJG 99 weight
JQF1181 Weighing Terms and Definitions
For dated references, only the dated edition applies to this rule; references that are not dated
, The latest version (including all amendments) applies to this procedure.
3 terms and units of measurement
3.1 terminology
The terminology used in this procedure is consistent with the terminology of JJF1181 and is intended for ease of use and ease of use.
Under the terms.
3.1.1 load load
Due to gravity, the load on the scale of the loader is called the items, and sometimes directly refers to their force.
Note. Loads include weights or other items with stable values.
3.1.2 carrier loadreceptor
The part of the scale that is used to accept the load.
3.1.3 measurement lever weighinglever
Equipped with a mound and/or balance nut, a load indicating component consisting of one or more levers.
3.1.4 increase mound slottedweight
With a semicircular notch, so that it can be placed on the weight of the plate on a certain shape of the weight.
3.1.5 wandering poise
Install or suspend the weight on the metering lever, which can be used in combination with the engraved line. It is often and measured on the lever
The ruler marks together to indicate the weighing value.
3.1.6 arm than armratio
Lever arm length ratio. Generally refers to the fulcrum to the focus of the distance divided by the fulcrum to the point of the distance from the business.
3.1.7 lead leadsealing
A seal mark with a metal lead or lead alloy used to prevent any unauthorized modification of the scale.
The physical markings of the whole or removed parts. Including the manufacturer's factory inspection qualified seal and the certification body of the test qualified
3.2 Units of measurement
The units of measurement used in the scale shall be the legal units of measurement, including kilograms (kg), g (g) and t (t).
Related standard: JJG 13-2016    JJG 17-2016
Related PDF sample: JJG 577-2012    JJG 667-2010