HOME Cart(12) Quotation About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

JJG 1103-2014 English PDF

US$419.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJG 1103-2014: Verification Regulation of Standard Torque Wrench
Status: Valid

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Status	PDF
JJG 1103-2014	English	419	Add to Cart	3 days [Need to translate]	Verification Regulation of Standard Torque Wrench	Valid	JJG 1103-2014

PDF similar to JJG 1103-2014

Standard similar to JJG 1103-2014

GB/T 9081 GB/T 21296.2 GB/T 21296.1

Basic data

Standard ID	JJG 1103-2014 (JJG1103-2014)
Description (Translated English)	Verification Regulation of Standard Torque Wrench
Sector / Industry	Metrology & Measurement Industry Standard
Classification of Chinese Standard	N13
Word Count Estimation	18,166
Date of Issue	11/17/2014
Date of Implementation	2/17/2015
Adopted Standard	DKD-R3-7, NEQ
Regulation (derived from)	The State Administration of Quality Supervision, Inspection and Quarantine Notice 2014 No. 125
Issuing agency(ies)	General Administration of Quality Supervision, Inspection and Quarantine
Summary	This Standard applies to standard torque wrench initial verification, use and subsequent verification check.

JJG 1103-2014: Verification Regulation of Standard Torque Wrench

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Verification Regulation of Standard Torque Wrench State verification procedures People's Republic of China Standard torque wrench Issued on. 2014-11-17 2015-02-17 implementation The State Administration of Quality Supervision, Inspection and Quarantine released Torque wrench standard test procedures Focal point. the National Technical Committee on Metering hardness force value The main drafting units. China Institute of Metrology The seventh THOUSAND AND FORTY-CSIC Institute Participated in the drafting. Zhejiang Provincial Institute of Metrology Beijing Great Wall Institute of Measurement and Testing Technology This procedure hardness values measured force commissioned by the National Technical Committee is responsible for interpretation The main drafters of this procedure. Meng Feng (China Institute of Metrology) Nitrogeh Co (China Institute of Metrology) Li Tao (China Shipbuilding Heavy Industry seventh THOUSAND AND FORTY Institute) Drafters participate. Jiang Xiaobo (Zhejiang Institute of Metrology) Lin Jing (China Shipbuilding Industry Corporation seventh THOUSAND AND FORTY Institute) Qin Haifeng (Beijing Great Wall Institute of Measurement and Testing Technology)

Introduction (Ⅱ) 1 Scope (1) 2 Terms and Definitions (1) 2.1 standard torque wrench (1) 2.2 maximum arm length (1) 2.3 Minimum arm length (1) 3 Overview (1) 4 metering performance requirements (1) 5 General Requirements (2) 5.1 Appearance (2) 5.2 Other relevant technical performance standards torque wrench (2) 5.3 indicating instrument use and replacement (2) 5.4 indicating instrument (2) 6 Control of measuring instruments (3) 6.1 Verification condition (3) 6.2 Verification Project (3) 6.3 Verification Methods (4) Processing 6.4 Verification Results (6) 6.5 test cycle (6) Appendix A calibration certificate and test results in the notice page format (7) Appendix B standard torque wrench calibration records (9) Appendix C verification step (10) Appendix D reference arm length and literature (11)

Introduction

The procedure according to the rules JJF1002-2010 "national verification procedures write rules" provisions of the preparation. The procedures in the development process with reference to the DKD-R3-7 "standard torque wrench calibration method" terminology, symbols Definitions, as well as technical requirements, technical specifications and test methods. This procedure gives a standard torque wrench special metering Of test conditions, test items and test methods. This procedure is the first release. Torque wrench standard test procedures

1 Scope

The order applies to standard torque wrench initial verification, use and subsequent verification check.

2 Terms and Definitions

2.1 standard torque wrench standardtorquewrench It refers to the high level of accuracy and torque wrench to the torque wrench Calibrator value transfer. 2.2 Maximum arm length maximumarmlength Standard torque wrench with square Falcon center point of application of the maximum distance, usually 90% of the standard torque wrench's length about. 2.3 Minimum arm length minimumarmlength The minimum standard torque wrench from the force application point and the center of the square Falcon, typically 60% of the standard torque wrench's length about.

3 Overview

Standard torque wrench is a high accuracy in torque measurement means different arm positions Shi twist, the standard torque Wrench normally applied by the torque arm, indicating instrument and sensor components, mainly used for torque wrench Calibrator for examination.

4 metering performance requirements

Standard torque wrench accuracy level of division and technical indicators are shown in Table 1. Table 1 standard torque wrench accuracy level of division and technical indicators level Technical Specifications xl Zr (% FS) b (%) bl (%) b '(%) Sb (%) δ (%) h (%) Zd (% FS) Ip (%) 0.1 2000r ± 0.01 0.1 0.1 0.1 ± 0.1 ± 0.1 ± 0.15 ± 0.01 ± 0.1 0.2 1000r ± 0.02 0.2 0.2 0.2 ± 0.2 ± 0.2 ± 0.30 ± 0.02 ± 0.2 0.3 667r ± 0.03 0.3 0.3 0.3 ± 0.3 ± 0.3 ± 0.45 ± 0.03 ± 0.3 0.5 400r ± 0.05 0.5 0.5 0.5 ± 0.5 ± 0.5 ± 0.75 ± 0.05 ± 0.5

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JJG 1103-2014_English be delivered?

Answer: Upon your order, we will start to translate JJG 1103-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JJG 1103-2014_English with my colleagues?

Answer: Yes. The purchased PDF of JJG 1103-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.