HOME   Cart(1)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

JJF 1905-2021 English PDF

US$529.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJF 1905-2021: Calibration Specification for Magnetic Flux Meters
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
JJF 1905-2021English529 Add to Cart 4 days [Need to translate] Calibration Specification for Magnetic Flux Meters Valid JJF 1905-2021

PDF similar to JJF 1905-2021


Standard similar to JJF 1905-2021

JJF 1234   JJF 1576   JJG 376   JJF 2000   JJF 1906   JJF 1895   

Basic data

Standard ID JJF 1905-2021 (JJF1905-2021)
Description (Translated English) Calibration Specification for Magnetic Flux Meters
Sector / Industry Metrology & Measurement Industry Standard
Classification of Chinese Standard A55
Word Count Estimation 23,218
Issuing agency(ies) State Administration for Market Regulation

JJF 1905-2021: Calibration Specification for Magnetic Flux Meters

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Calibration Specification for Magnetic Flux Meters National Metrology Technical Specifications of the People's Republic of China Fluxmeter calibration specification Released on 2021-02-23 2021-08-23 implementation Issued by the State Administration for Market Regulation Fluxmeter calibration specification Replace JJG317-1983 Focal point. National Electromagnetic Metrology Technical Committee Main drafting unit. China Academy of Testing Technology China Institute of Metrology Participated in the drafting. Hunan Institute of Metrology and Testing Zhejiang Institute of Metrology Changsha Tianheng Measurement and Control Technology Co., Ltd. This specification entrusts the National Electromagnetic Metrology Technical Committee to be responsible for the interpretation The main drafters of this specification. Yu Xiaoxi (China Academy of Testing Technology) Zhang Wei (China Institute of Metrology) Participating drafters. Xiao Peng (China Academy of Testing Technology) Li Long (China Testing Technology Research Institute) Xu Yu (Hunan Institute of Metrology and Testing) Yu Zhishu (Zhejiang Institute of Metrology) Zhou Xinhua (Changsha Tianheng Measurement and Control Technology Co., Ltd.)

table of Contents

Introduction (Ⅱ) 1 Scope (1) 2 Reference documents (1) 3 Overview (1) 4 Measurement characteristics (1) 4.1 Zero drift (1) 4.2 Magnetic flux indication error (1) 5 Calibration conditions (1) 5.1 Environmental conditions (1) 5.2 Measurement standards and other equipment (1) 6 Calibration items and calibration methods (3) 6.1 Calibration items (3) 6.2 Calibration method (3) 7 Expression of calibration results (6) 8 Recalibration interval (7) Appendix A Measurement Uncertainty Evaluation Example of Calibration Error of Indication (8) Appendix B Calibration Original Record Format (13) Appendix C Internal Page Format of Calibration Certificate (15) Appendix D Correction method for the influence of external loop resistance on measurement results (17)

Introduction

JJF 1071 "Rules for the Compilation of National Metrology and Calibration Specifications", JJF 1001 "General Metrology Terms and Definitions" and JJF 1059.1 "Evaluation and Expression of Measurement Uncertainty" together constitutes a basic series that supports the formulation of this specification specification. This specification replaces JJG317-1983 "Trial Verification Regulations for Magnetic Flux Meters". Compared with JJG317-1983, the main The technical changes are as follows. ---Added reference files; ---Metering characteristics increase the zero point drift; ---The calibration method adds the volt-second method; The previous releases of this specification are as follows. ---JJG317-1983. Fluxmeter calibration specification

1 Scope

This specification applies to the measurement range of 0.1mWb~10Wb, and the maximum allowable error is ±(0.1%~5.0%) Calibration of the fluxmeter.

2 Reference documents

The following documents are cited in this specification. JJF 1013 Commonly used terms and definitions of magnetic measurement For dated reference documents, only the dated version applies to this specification; for all undated references The latest version (including all amendments) is applicable to this specification.

3 overview

Fluxmeter is used for the measurement of magnetic flux. According to the display mode, it is divided into pointer type and digital type. The digital type is divided into digital Integral and analog integral. When the magnetic flux linked in the measuring coil of the fluxmeter changes, an induced electromotive force will be generated at both ends of the measuring coil. The flux meter measures the magnetic flux by integrating the induced electromotive force.

4 Metrological characteristics

4.1 Zero drift Under the condition that the input terminal of the flux meter coil is short-circuited, the maximum absolute value of the magnetic flux indication within 60s. 4.2 Magnetic flux indication error The magnetic flux indication error of the fluxmeter does not exceed its nominal maximum allowable error, and the maximum allowable error range is generally ±(0.1%~5.0%). Note. The above indicators are not used for eligibility judgment and are for reference only.

5 Calibration conditions

5.1 Environmental conditions The environmental conditions and requirements are as follows. a) Ambient temperature. (20±5)℃; b) Relative humidity. ≤80%; c) Power supply. (220±22)V, (50±1)Hz; d) There is no vibration, shock or other electromagnetic interference that obviously affects the calibration. 5.2 Measurement standards and other equipment 5.2.1 Measurement standards and other equipment used by each calibration method The measurement standards and other equipment used by each calibration method are shown in Table 1.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JJF 1905-2021_English be delivered?

Answer: Upon your order, we will start to translate JJF 1905-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JJF 1905-2021_English with my colleagues?

Answer: Yes. The purchased PDF of JJF 1905-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.