|
US$399.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJF 1419-2013: Program of Pattern Evaluation of Buoy Type Oxygen Inhalator
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| JJF 1419-2013 | English | 399 |
Add to Cart
|
3 days [Need to translate]
|
Program of Pattern Evaluation of Buoy Type Oxygen Inhalator
| Valid |
JJF 1419-2013
|
PDF similar to JJF 1419-2013
Basic data | Standard ID | JJF 1419-2013 (JJF1419-2013) | | Description (Translated English) | Program of Pattern Evaluation of Buoy Type Oxygen Inhalator | | Sector / Industry | Metrology & Measurement Industry Standard | | Classification of Chinese Standard | A53 | | Classification of International Standard | 17.100 | | Word Count Estimation | 17,135 | | Quoted Standard | JJG 52; JJG 257-2007; JJG 913; YY 1107-2003 | | Regulation (derived from) | ?AQSIQ Announcement 2013 No. 88; | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine | | Summary | This standard applies to patients for emergency medical units for oxygen and oxygen inhalation of hypoxic patients buoy type oxygen inhalation device (hereinafter referred to as inhalers) for type evaluation. | JJF 1419-2013: Program of Pattern Evaluation of Buoy Type Oxygen Inhalator---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Program of Pattern Evaluation of Buoy Type Oxygen Inhalator
People's Republic of China National Metrology Technical Specifications
Buoy type oxygen inhaler type evaluation outline
Issued on. 2013-07-04
2013-10-04 implementation
The State Administration of Quality Supervision, Inspection and Quarantine released
Buoy type oxygen inhaler type evaluation outline
BuoyTypeOxyg
enInhalator
Focal point. the National Technical Committee of pressure measurement
Main drafting unit. Shanghai Institute of Measurement and Testing
Participated in the drafting unit. Beijing Institute of Metrology detection
This specification commissioned the National Technical Committee of pressure measurement shall be interpreted
The main drafters of this specification.
Huan Lun (Shanghai Institute of Measurement and Testing)
Tu Li Meng (Shanghai Institute of Measurement and Testing)
Drafters participate.
Hu Haitao (Beijing Institute of Metrology detection)
table of Contents
Introduction (Ⅱ)
1 Scope (1)
2. References (1)
3 Overview (1)
4 legal management requirements (1)
4.1 units of measurement (1)
4.2 accuracy class (1)
4.3 legal metrology marking and identification of measuring instruments (1)
4.4 Design of the external structure (2)
4.5 Experimental Prototype (2)
4.6 submit technical data (2)
5 measurement requirements (2)
5.1 Oxygen pressure gauge (2)
5.2 meter (2)
6 General Requirements (3)
6.1 normal operating conditions (3)
6.2 Operating Conditions Reference (3)
6.3 Appearance (3)
6.4 Oxygen pressure gauge (3)
6.5 meter (3)
6.6 Tide bottle (3)
6.7 Working pressure (3)
6.8 sealing (3)
6.9 exhaust pressure relief valve (4)
6.10 Tide bottle compressive strength (4)
6.11 structural strength (4)
7 types of evaluation items (4)
8 Test Conditions and Methods (5)
8.1 test standard (5)
8.2 Test Method (5)
Type 9 Judgment principle results (9)
Appendix A buoy type oxygen inhaler type evaluation original record format (10)
Introduction
JJF 1002-2010 "national verification procedures write rules", JJF 1001 "common measurement terms and definitions"
And JJF 1059 "Evaluation and Expression of Uncertainty in Measurement" together constitute the basic outline of the development of the series specifications.
This outline accordance JJG913 "buoy type oxygen inhaler", JJG52 "elastic element type general pressure gauges, pressure
Vacuum gauge and vacuum gauge ", JJG257-2007" rotameter "and YY1107-2003" buoy type oxygen absorption
Enter "on the content requires compiled, it is possible to buoy type oxygen inhaler performance of an objective, comprehensive and effective
Evaluation.
The outline of the structure in accordance with JJF 1016-2009 "appliance type evaluation outline guidelines for the preparation of measurement" orchestrated
Each chapter in accordance with JJF 1015-2002 "Measuring Instruments type evaluation and type approval of universal norms" and JJF 1002-
2010 provisions "national verification procedures write rules" were prepared.
Buoy type oxygen inhaler type evaluation outline
1 Scope
This outline is applied to the patient for emergency medical units for oxygen and hypoxia patient oxygen inhalation buoy type oxygen inhaler
(Hereinafter referred to as inhalers) for type approval.
2. References
This outline cited the following documents.
JJG52 general formula elastic element pressure gauges, pressure vacuum gauge and vacuum gauge
JJG257-2007 rotameter
JJG913 buoy type oxygen inhaler
YY1107-2003 buoy type oxygen inhaler
For dated references, only the dated edition applies to this outline; undated reference documents
Member, the latest edition (including any amendments) applies to this outline.
3 Overview
Inhaler from the oxygen pressure gauges, flow meters, pressure reducer, safety valve and the influx of bottles composition.
Inhaler works. Oxygen cylinders by decompression reducer, from high pressure to low oxygen
Pressure of oxygen, and then the flow meter flow control, humidification bottle after the tide, at a constant flow rate value output by the output mouthend,
For patient oxygen inhalation.
4 legal management requirements
4.1 units of measurement
Inhaler oxygen meter gauge and legal units of measurement should be used. The basic unit of measure commonly used legal arguments
Bits and symbols in Table 1.
Common legal units of measurement in Table 1 of the basic parameters of the inhaler
Quantity Name Unit Symbol
Pressure MPa
Flow L/min
4.2 accuracy class
Inhaler oxygen gauge accuracy rating of 2.5; meter accuracy rating of 4.
4.3 legal metrology marking and measuring instruments logo
4.3.1 legal metrology signs generally include the following.
--- Measurement equipment manufacturing license logo and number (test prototype should stay out of the corresponding position);
--- Supporting the use of oxygen pressure gauge should obtain measurement equipment manufacturing license;
|