|
US$929.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJF 1415-2013: Program of Pattern Evaluation of Elastic Element Pressure Gauges, Pressure-Vacuum Gauges and Vacuum Gauges for General Use
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| JJF 1415-2013 | English | 929 |
Add to Cart
|
6 days [Need to translate]
|
Program of Pattern Evaluation of Elastic Element Pressure Gauges, Pressure-Vacuum Gauges and Vacuum Gauges for General Use
| Valid |
JJF 1415-2013
|
PDF similar to JJF 1415-2013
Basic data | Standard ID | JJF 1415-2013 (JJF1415-2013) | | Description (Translated English) | Program of Pattern Evaluation of Elastic Element Pressure Gauges, Pressure-Vacuum Gauges and Vacuum Gauges for General Use | | Sector / Industry | Metrology & Measurement Industry Standard | | Classification of Chinese Standard | A53 | | Classification of International Standard | 17.100 | | Word Count Estimation | 40,490 | | Quoted Standard | JJG 52-2013; GB/T 1226-2010; GB 3836.1-2000; GB 3836.4-2000; GB/T 2423.10-2008; GB/T 2423.101-2008; JB/T 5491-2005; JB/T 5527-2005; JB/T 5528-2005; JB/T 6804-2006; JB/T 8624-1997; JB/T 9252-1999; JB/T 9272-1999; JB/T 9273-1999; JB/T 9274-1999; JB/T 9329-1 | | Regulation (derived from) | ?AQSIQ Announcement 2013 No. 85; | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine | | Summary | This standard applies to the measurement range (-0. 1 ~ 250) MPa to spring tube, diaphragm, elastic element diaphragm and bellows pressure-sensing element as a pressure gauge (hereinafter referred to as the instrument) for type evaluation. | JJF 1415-2013: Program of Pattern Evaluation of Elastic Element Pressure Gauges, Pressure-Vacuum Gauges and Vacuum Gauges for General Use
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Program of Pattern Evaluation of Elastic Element Pressure Gauges, Pressure-Vacuum Gauges and Vacuum Gauges for General Use
People's Republic of China National Metrology Technical Specifications
Usually the elastic element type pressure gauges, pressure vacuum gauge
And vacuum gauge type evaluation outline
Issued on. 2013-06-27
2013-09-27 implementation
The State Administration of Quality Supervision, Inspection and Quarantine released
Usually the elastic element type pressure gauges, pressure
Vacuum gauge and vacuum gauge type evaluation outline
ElasticElementPressureGauges, Pressure-Vacuum
esforGeneralUse
Focal point. the National Technical Committee of pressure measurement
Main drafting unit. Liaoning Provincial Institute of Metrology
Tianjin Institute of Supervision and Testing Weighing
Participated in the drafting unit. Measurement and Testing Technology Research Institute, Guangzhou
Zhejiang Institute of Metrology
This outline commissioned the National Technical Committee of pressure measurement shall be interpreted
The main drafters of this specification.
Wang Bin (Liaoning Provincial Institute of Metrology)
Zhang Zijian (Liaoning Provincial Institute of Metrology)
Wind-Palace (Tianjin Supervision and Testing Institute of Metrology)
Shang Shuangshuang (Liaoning Provincial Institute of Metrology)
Drafters participate.
Li Zhihao (Guangzhou Institute of Measurement and Testing)
Tubin Bin (Zhejiang Institute of Metrology)
Lu Tao (Zhejiang Institute of Metrology)
table of Contents
Introduction (Ⅴ)
1 Scope (1)
2. References (1)
3 Terms (1)
4 Overview (2)
5 legal management requirements (2)
5.1 units of measurement (2)
5.2 accuracy class (2)
5.3 legal metrology marking and identification instruments (2)
5.4 External structural design requirements (2)
5.5 provide technical review of documents (2)
5.6 Experimental Prototype (2)
6 measurement requirements (3)
6.1 indicating means (3)
6.2 zero error (3)
6.3 Indication error (3)
6.4 Return Error (4)
6.5 Displacement tap (4)
6.6 Pointer (brush) yaw stability (5)
6.7 Setpoint deviation (5)
6.8 switching difference (5)
7 General Requirements (5)
7.1 extreme conditions (5)
7.2 Reference conditions (5)
7.3 Appearance (6)
7.4 Ultra (static) pressure (6)
7.5 Effect of temperature (6)
7.6 alternating pressure (7)
7.7 resistance to vibration performance work environment (8)
7.8 anti-environmental performance of transport (9)
7.9 Anti-pulsation performance measured medium (9)
7.10 Heat resistance (9)
Strength 7.11 (10)
7.12 reverse (10)
7.13 Bending (10)
7.14 ban oil (10)
7.15 air intake area (10)
7.16 energy release (10)
7.17 meter housing (10)
7.18 Permanent brightening agent (10)
7.19 pitch and yaw (10)
7.20 Salt (11)
7.21 Scope (11)
Contact off function (11) 7.22 electrical signal device
7.23 insulation (11)
7.24 explosion-proof (12)
7.25 Reverse Power Protection (12)
7.26 Output AC component (12)
7.27 Dead (12)
7.28 power variation (12)
7.29 common-mode interference (13)
RFI 7.30 (13)
7.31 external magnetic field (13)
7.32 output load change (13)
8 Type Evaluation Project (13)
Test conditions and test methods 9 projects (15)
9.1 type evaluation of the condition (15)
9.2 Test Equipment (15)
9.3 test points (15)
9.4 Test procedure (15)
9.5 indicating means (15)
9.6 zero error (16)
9.7 Indication error (16)
9.8 Return error (17)
9.9 Tapping displacement (17)
9.10 pointer (brush) yaw stability (17)
9.11 Setpoint deviation (17)
9.12 switching difference (18)
9.13 Appearance (18)
9.14 Ultra (static) pressure (18)
9.15 Effect of temperature (18)
9.16 alternating pressure (19)
9.17 resistance to vibration performance work environment (19)
9.18 anti transport environmental performance (20)
9.19 Anti-pulsation performance measured medium (20)
9.20 Heat resistance (20)
Strength 9.21 (20)
9.22 reverse (21)
9.23 Bending (21)
9.24 ban oil (21)
9.25 air intake area (22)
9.26 energy release (22)
9.27 meter housing (22)
9.28 Permanent brightening agent (22)
9.29 pitch and yaw (22)
9.30 Salt Spray (23)
9.31 Scope (23)
9.32 electrical signal device contact off function (23)
9.33 insulation (23)
9.34 explosion-proof (24)
9.35 Reverse Power Protection (24)
9.36 Output AC component (24)
9.37 Dead (24)
9.38 power variation (24)
9.39 common-mode interference (25)
RFI 9.40 (26)
9.41 external magnetic field (26)
9.42 output load change (26)
Processing (27) 10 type of evaluation results
A time interval between the test sequence and project appendix (28)
Appendix B-type elastic member general pressure gauges, pressure vacuum gauge and vacuum gauge type evaluation recording format (29)
Introduction
JJF 1015 "Measuring Instruments type evaluation and type approval general specification", JJF 1016 "Measuring Instruments type evaluation
Outline guidelines for the preparation ", JJF 1002" national verification procedures writing rules "and JJF 1071" National Calibration
Specifications writing rules "together constitute the basic series This specification developed.
This outline reference GB/T 1226-2010 "General gauge", JJG52 "elastic element gauge general formula,
Pressure vacuum gauge and vacuum gauge ", JB/T 5491-2005" diaphragm pressure gauge ", JB/T 5527-2005" Marine Pressure
Gauge ", JB/T 6804-2006" seismic pressure gauge ", JB/T 8624-1997" diaphragm pressure gauge "
JB/T 9271-1999 "welding, cutting and allied processes gauge", JB/T 9272-1999 "ammonia pressure gauge"
JB/T 9273-1999 "electrical contacts", JB/T 9274-1999 "diaphragm pressure gauge", JB/T 10203-
2000 "remote gauge", all the elastic element pressure gauge all included in this outline. At the same time, also with reference to the
GB 3836.1-2000 "Electrical apparatus for explosive gas atmospheres - Part 1. General requirements", GB 3836.4-
2000 "explosive gas environment with electrical equipment - Part 4. Intrinsic safety" i "", GB/T 2423.10-
2008 "Environmental testing for electric and electronic products Part 2. Test methods Test Fc. Vibration (sinusoidal)"
GB/T 2423.17-2008 "Environmental testing for electric and electronic products Part 2. Test methods - Test Ka. Salt
Fog ", GB/T 2423.101-2008" Environmental testing for electric and electronic products Part 2. Test methods Test.
Tilt and sway ", JB/T 5528-2005" Scale and gauge division ", JB/T 9252-1999" Industrial Automation
General requirements for basic types of meter pointer portion size and pointer ", JB/T 9329-1999
"Instruments transportation transport storage basic environmental conditions and test methods."
Usually the elastic element type pressure gauges, pressure vacuum gauge
And vacuum gauge type evaluation outline
1 Scope
This outline is applied to the measurement range (-0.1 ~ 250) MPa to spring tube, diaphragm, bellows and bellows
And other elastic element as a pressure-sensing element of the pressure instrument (hereinafter referred to as instrumentation) of pattern evaluation.
2. References
This outline cited the following documents.
JJG52-2013 general formula elastic element pressure gauges, pressure vacuum gauge and vacuum gauge
GB/T 1226-2010 General Pressure Gauge
GB 3836.1-2000 Electrical equipment for explosive gas atmospheres - Part 1. General requirements
GB 3836.4-2000 Electrical equipment for explosive gas atmospheres Part 4. Intrinsic safety "i"
GB/T 2423.10-2008 Environmental testing for electric and electronic products Part 2. Test methods Test Fc.
Vibration (sinusoidal)
GB/T 2423.17-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test Ka.
Salt
GB/T 2423.101-2008 Environmental testing for electric and electronic products Part 2. Test methods Test. Pour
Ramp and swing
JB/T 5491-2005 diaphragm pressure gauge
JB/T 5527-2005 Marine gauges
JB/T 5528-2005 scale and gauge division
JB/T 6804-2006 seismic pressure gauge
JB/T 8624-1997 diaphragm pressure gauge
The basic types JB/T 9252-1999 industrial automation, instrumentation pointer portion size and a pointer
General technical requirements
JB/T 9272-1999 ammonia pressure gauge
JB/T 9273-1999 electrical contacts
JB/T 9274-1999 diaphragm pressure gauge
JB/T 9329-1999 Instrument transportation transport storage basic environmental conditions and test methods
JB/T 10203-2000 remote pressure gauge
For dated references, only the dated edition applies to this outline; undated reference documents
Member, the latest edition (including any amendments) applies to this outline.
3 Terms
3.1 alternating pressure test cyclicpressuretest
|