|
US$439.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJF 1399-2013: Examination Specification for China Metrology Certification. Diaphragm Gas Meters
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| JJF 1399-2013 | English | 439 |
Add to Cart
|
4 days [Need to translate]
|
Examination Specification for China Metrology Certification. Diaphragm Gas Meters
| Valid |
JJF 1399-2013
|
PDF similar to JJF 1399-2013
Basic data | Standard ID | JJF 1399-2013 (JJF1399-2013) | | Description (Translated English) | Examination Specification for China Metrology Certification. Diaphragm Gas Meters | | Sector / Industry | Metrology & Measurement Industry Standard | | Classification of Chinese Standard | A53 | | Classification of International Standard | 17.120 | | Word Count Estimation | 19,166 | | Older Standard (superseded by this standard) | Gas Meter measurement equipment manufacturing license examination prerequisites | | Quoted Standard | JJG 577; JJF 1354; GB/T 6968 | | Regulation (derived from) | AQSIQ Announcement No. 28 of 2013 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine | | Summary | This standard applies to diaphragm gas meter (hereinafter referred to as gas meter) production enterprises manufacturing measurement apparatus permits the assessment of the necessary conditions of production, after the expiration of the review as well as | JJF 1399-2013: Examination Specification for China Metrology Certification. Diaphragm Gas Meters
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Examination Specification for China Metrology Certification.Diaphragm Gas Meters
People's Republic of China National Metrology Technical Specifications
Diaphragm gas meter measurement equipment manufacturing
Licensing Examination Prerequisites
Issued on. 2013-02-16
2013-08-16 implementation
The State Administration of Quality Supervision, Inspection and Quarantine released
Diaphragm gas meter measurement equipment manufacturing
Licensing Examination Prerequisites
Diaphrag
mGasMeters
Instead of "gas meter manufacturing
Measuring instruments permit
Examination Prerequisites "
Focal point. the National Technical Committee on Metering flow capacity
Main drafting unit. Beijing Institute of Metrology detection
Chongqing Institute of Metrology and Quality Inspection
Zhejiang Institute of Metrology
Participated in the drafting unit. Liaoning Provincial Institute of Metrology
Chongqing avant-garde Crom Table industry limited liability company
Zhejiang Gold high-tech Co., Ltd.
Rongcheng Yuxiang Industrial Co., Ltd.
This specification flow capacity commissioned the National Technical Committee responsible for the interpretation of measurement
The main drafters of this specification.
Yangyou Tao (Beijing Institute of Metrology detection)
Liao new (Chongqing Institute of Metrology and Quality Inspection)
Zhaojian Liang (Zhejiang Institute of Metrology)
Drafters participate.
Wang (Liaoning Provincial Institute of Metrology)
Yin Daiqiang (Chongqing avant-garde Crom Table industry limited liability company)
En full (Zhejiang Gold high-tech Co., Ltd.)
Zou Ziming (Rongcheng Yuxiang Industrial Co., Ltd.)
table of Contents
Introduction (Ⅲ)
1 Scope (1)
2. References (1)
3 Terms (1)
3.1 Additional apparatus (1)
3.2 with additional means of a gas meter (1)
4 product technical documentation (1)
5 production facilities (1)
5.1 General (1)
5.2 base table production equipment, process equipment and tooling and testing equipment (2)
Production equipment, process equipment and tooling and testing equipment 5.3 device with additional gas meter (3)
6 Test conditions (4)
6.1 factory inspection accommodation and environmental conditions (4)
6.2 inspectors (5)
6.3 factory inspection equipment (5)
7 technical staff (7)
8 - Safety requirements (7)
9 Additional requirements (7)
9.1 Plant area (7)
9.2 Plant ownership and use (7)
Appendix A assessment record sheet (8)
Introduction
In order to regulate diaphragm gas meter measurement equipment manufacturing license assessment work to ensure that scientific assessment work, objective, public
Flat, impartiality and effectiveness, according to "manufacture and repair of measuring instruments license supervision and management measures" and "new production of measuring instruments
Product management approach "metrology regulations, development of this specification.
This specification is JJG577 "diaphragm gas meter", JJF 1354 "diaphragm gas meter type evaluation outline" and
GB/T 6968 "diaphragm gas meter" as the technical basis, combined with the production status of diaphragm gas meter industry, confrontation
Technical supervision of the volume of documentation [2000] No. 117 "gas meter measurement equipment manufacturing license examination Prerequisites" be revised.
This specification applies to diaphragm gas meter manufacturer measurement equipment manufacturing license examination, review, and after the expiration date
Regular supervision and inspection, is JJF 1246-2010 "measurement equipment manufacturing license examination universal norms" about the content patch
Charge. To this end, standardized to.
--- Compliance with relevant laws and regulations of the country;
--- Scope should clearly within its defined, and strive to complete as necessary;
--- The requirements of scientific and reasonable, taking into account economic feasibility and implementation.
"Diaphragm gas meter measurement equipment manufacturing license examination Prerequisites" of previously issued as follows.
--- July 31, 2000 the State Quality and Technical Supervision (Zhijijianju amount Fa [2000] No. 117) issued the text
Cloth "promulgated on the instrument, gas meter, water meter measurement equipment manufacturing license examination prerequisites Notification"
"Gas Meter measurement equipment manufacturing license examination prerequisites."
Diaphragm gas meter measurement equipment manufacturing
Licensing Examination Prerequisites
1 Scope
This instruction applies to diaphragm gas meter (hereinafter referred to as gas meter) manufacturer of measurement equipment manufacturing license necessary raw
Production conditions assessment, review and daily supervision and inspection after the expiration.
2. References
This specification refers to the following documents.
JJG577 diaphragm gas meter
JJF 1354 diaphragm gas meter type evaluation outline
GB/T 6968 diaphragm gas meter
For dated references, only the dated edition applies to this specification; undated reference documents
Member, the latest edition (including any amendments) applies to this specification.
3 Terms
3.1 Additional apparatus ancilarydevices
Additional tables on the base unit can be achieved corresponding function. Allowed on the base table is equipped with a prepaid device, signal generator
Generator, industrial and commercial devices, the secondary table means to achieve certain functions, but does not affect the performance measurement gas meter. Attached
Plus apparatus generally includes read data base tables, traffic signal conversion and control units.
Gas meter gasmetersequippedwithancilarydevices 3.2 with attachments
Equipped with additional means to achieve the intended function of the gas meter. There are. IC card diaphragm gas meter, the electrical signal away
Mass diaphragm gas meter, or other types of intelligent diaphragm gas meter and so on.
Note. The mechanical gas meter with an additional device used also called base tables. Base table is normally provided by the housing, diaphragm metering chamber, distribution
Valve, connecting rod mechanism to prevent reversal means, transmission and counters and other key component parts.
4 Technical file
Used to guide product design, production, testing, use and other documents, including product standards, technical specifications, drawings,
Thus, process documents, operating instructions and the like.
Products (whole and parts) drawings should be complete, consistent, correct specification should be related to the production process and work cards
Arts flowchart, procedures or work instructions and processes should be a key step in the inspection records.
Standard product implementation and verification procedures should be in force, and relevant technical regulatory system.
5 production facilities
5.1 General
Production facilities including production equipment, process equipment and tooling and testing equipment in three parts.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of JJF 1399-2013_English be delivered?Answer: Upon your order, we will start to translate JJF 1399-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of JJF 1399-2013_English with my colleagues?Answer: Yes. The purchased PDF of JJF 1399-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|