HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

JJF 1229-2021 English PDF

US$929.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJF 1229-2021: Mass and Density Metrological Terms and Their Definitions
Status: Valid

JJF 1229: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
JJF 1229-2021English929 Add to Cart 6 days [Need to translate] Mass and Density Metrological Terms and Their Definitions Valid JJF 1229-2021
JJF 1229-2009EnglishRFQ ASK 7 days [Need to translate] Mass and Density Terms in Metrology and Their Definitions Obsolete JJF 1229-2009
JJF 1229-1990English199 Add to Cart 2 days [Need to translate] O.T.N. for Vacuum Primary Standard in the Range from 110-3 to 1 Pa Obsolete JJF 1229-1990

PDF similar to JJF 1229-2021


Standard similar to JJF 1229-2021

JJG 1114   JJF 1280   GB/T 1885   JJF 1509   

Basic data

Standard ID JJF 1229-2021 (JJF1229-2021)
Description (Translated English) Mass and Density Metrological Terms and Their Definitions
Sector / Industry Metrology & Measurement Industry Standard
Classification of Chinese Standard A51
Word Count Estimation 41,486
Issuing agency(ies) State Administration for Market Regulation

JJF 1229-2021: Mass and Density Metrological Terms and Their Definitions

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Mass and Density Metrological Terms and Their Definitions National Metrology Technical Specification of the People's Republic of China Mass Density Measurement Terms and Definitions Published on 2021-12-28 2022-06-28 Implementation Released by the State Administration for Market Regulation Mass Density Measurement Terms and Definitions Replacing JJF 1229-2009 Focal Point. National Mass Density Measurement Technical Committee Main drafting unit. China Institute of Metrology Participating in the drafting unit. Beijing Institute of Metrology and Testing Sciences Jiangsu Institute of Metrology Inner Mongolia Autonomous Region Metrology and Testing Research Institute Xinjiang Uygur Autonomous Region Metrology and Testing Research Institute This specification is entrusted to the National Mass Density Measurement Technical Committee to be responsible for the interpretation The main drafters of this specification. Li Zhanhong (China Institute of Metrology) Hu Manhong (China Institute of Metrology) Participating drafters. Li Jingjing (Beijing Institute of Metrology and Testing) Liu Wei (Jiangsu Institute of Metrology) Wen Xianguang (Inner Mongolia Autonomous Region Metrology and Testing Research Institute) Guo Rui (Xinjiang Uygur Autonomous Region Metrology and Testing Research Institute) Pan Ying (Xinjiang Uygur Autonomous Region Metrology and Testing Research Institute)

Table of contents

Introduction (Ⅱ) 1.Terms and definitions of quality measurement terms (1) 1 Scope(1) 2 References (1) 3 General Terms(1) 4 Quality measuring instruments (4) 5 Measuring instrument structure(6) 6 Metrology Characteristics(9) 7 Influence quantities and standard conditions (11) Chinese Index (14) English Index(17) 2.Density measurement terms and definitions (23) 1 Scope(23) 2 References (23) 3 General Terms (23) 4 Density Measuring Instruments(24) 5 Feature Terminology(29) Chinese Index (31) English Index(33)

Introduction

This specification refers to documents such as metrological technical regulations, national standards, international recommendations and international standards. JJF 1229-2009 "Mass Density Measurement Terms and Definitions" has been revised. The terms and definitions of quality measurement terms in this specification are based on the R76 "Non- The entries and terms provided in the International Recommendations of Automatic Weighing Apparatus and R111 "Weights" are mainly based on references to other relevant international For the measurement terms and explanations in the recommendations and relevant domestic regulations, a total of 163 entries are included in the quality part of this specification. Density measurement terms and definitions refer to the relevant regulations and specifications for density measurement terms and solutions. There are a total of 80 entries in the density part of this specification. Compared with JJF 1229-2009, except for editorial revisions, the main technical changes of this specification are as follows. --- Added the introduction section; --- Modified the referenced document; --- Deleted incorrect entries and definitions; --- Added the definition of terms for mass density measuring instruments; --- Revised the content of the terms and entries with unclear definitions; --- Corrected the Chinese and English index parts. The previous releases of this specification are as follows. ---JJF 1229-2009. Mass Density Measurement Terms and Definitions 1.Terms and definitions of quality measurement terms

1 Scope

This specification is used for formulating and revising quality measurement technical regulations, and is used in other aspects of quality measurement and related fields. Domains can also be used by reference.

2 Reference documents

This specification references the following documents. JJG46 Torque Balance JJG98 Mechanical Balance JJG99 Weight JJG156 shelf balance JJG171 Liquid Relative Density Balance JJG658 Drying method moisture analyzer JJG1036 Electronic balance JJG1130 Pallet Torque Balance JJF 1181 Weighing Instrument Measurement Terms and Definitions JJF 1326 Mass Comparator Calibration Specification OIMLR111 E1, E2, F1, F2, M1, M1-2, M2, M2-3 and M3 class weights (Weightsof classesE1,E2,F1,F2,M1,M1-2,M2,M2-3andM3) For dated references, only the dated version applies to this specification; for undated references The latest version (including all amendments) applies to this specification.

3 General terms

3.1 Weighing A measurement of the mass of an object (load). Note. According to the state of the object to be weighed, it can be divided into static weighing and dynamic weighing. 3.1.1 Dynamic weighing weighing-in-motion; WIM Weighing when there is relative movement between the load to be weighed and the load bearing of the scale. Dynamic weighing is always continuous Weigh. 3.1.2 Static weighing staticweighing

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JJF 1229-2021_English be delivered?

Answer: Upon your order, we will start to translate JJF 1229-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JJF 1229-2021_English with my colleagues?

Answer: Yes. The purchased PDF of JJF 1229-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version JJF 1229-2021?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JJF 1229-2021 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.