JJF 1069-2007_English: PDF (JJF1069-2007)
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Related Standard | Status | PDF |
JJF 1069-2007 | English | 1919 |
Add to Cart
|
11 days
|
Rules for the Examination of the Service of Legal Metrological Verification
|
JJF 1069-2007
| Obsolete |
JJF 1069-2007
|
Standard ID | JJF 1069-2007 (JJF1069-2007) | Description (Translated English) | Rules for the Examination of the Service of Legal Metrological Verification | Sector / Industry | Metrology & Measurement Industry Standard | Classification of Chinese Standard | A00 | Classification of International Standard | 03.120.20 | Word Count Estimation | 64,699 | Date of Issue | 2007-02-28 | Date of Implementation | 2007-04-01 | Older Standard (superseded by this standard) | JJF 1069-2003 | Quoted Standard | JJF 1001; JJF 1015; JJF 1016; JJF 1033; JJF 1059; JJF 1070; JJF 1071; JJF 1117; CIPM/MRA-1999; GB/T 19000-2000; GB/T 19001-2000; GB/T 19022-2003; GB/T 15483-1999; GB/T 27000-2006; GB/T 27011-2005; ISO/IEC 17025-2005 | Drafting Organization | Jiangsu Province Quality and Technical Supervision | Administrative Organization | National Measurement Technical Committee of Legal Metrology Management | Regulation (derived from) | ?AQSIQ "on release JJG30-2012" Universal caliper test procedures "and other 11 national metrology technical regulations Bulletin" (2012 No.35 Announcement) | Issuing agency(ies) | State Administration of Quality Supervision, Inspection and Quarantine | Summary | This standard specifies the legal metrology agency government administrative departments authorized money transfer, traceability, commodity type detection and evaluation of measuring instruments must meet the requirements of the task, as well as legal metrology institutes assessment and evaluation procedures the results of the evaluation method. This specification applies to government administrative departments of legal metrology institutes assessment and supervision and inspection and test suitable for such applications, authorized metering technology assessment agencies other commodities detection and measurement equipment type evaluation and supervision and inspection tasks. |
JJF 1069-2007
Rules for the Examination of the Service of Legal Metrological Verification
People's Republic of China National Metrology Technical Specifications
Specification for the Examination legal metrology
Posted 2007-02-28
2007-04-01 implementation
The State Administration of Quality Supervision, Inspection and Quarantine released
Specification for the Examination legal metrology
LegalMetrolog
Replacing JJF 1069-2003
This specification by the State Administration of Quality Supervision, Inspection and Quarantine approved on February 28, 2007, and from
From April 1, 2007 implementation.
Focal point. the National Technical Committee of Legal Metrology measurement management
Main drafting unit. Jiangsu Province Quality and Technical Supervision
Participated in the drafting unit. State Administration of Quality Supervision, Inspection and Quarantine Division metering
China Institute of Metrology
Guangdong Provincial Institute of Metrology
China Testing Technology Research Institute
This specification managed by the National Technical Committee of Legal Metrology measurement responsible for interpreting
The main drafters of this specification.
Huang Yaowen (Jiangsu Province Quality and Technical Supervision)
Shichang Yan (China Institute of Metrology)
Zhao Tianchuan (Guangdong Institute of Metrology)
Drafters participate.
Wang Yingjun (State Administration of Quality Supervision, Inspection and Quarantine Measurement Department)
Sai Wan Ho (Jiangsu Province Quality and Technical Supervision)
Weishou Fang (China Testing Technology Research Institute)
table of Contents
introduction
1 Scope (2)
2. Referenced Documents (2)
3 Terms and definitions (3)
4 organization and management (4)
4.1 Legal Status (4)
4.2 Liability (4)
4.3 Basic Conditions (4)
5 management system (5)
5.1 General Requirements (5)
5.2 Management Responsibilities (6)
5.3 system files (6)
5.4 Document Control (7)
5.5 Record Control (7)
5.6 Management Review (7)
6 resource allocation and management (8)
6.1 General (8)
6.2 staff (8)
6.3 Accommodation and environmental conditions (9)
6.4 measuring device (10)
7 verification and implementation of calibration and testing (11)
7.1 test, calibration and test implementation plan (11)
7.2 Customer-related processes (11)
7.3 verification, calibration and testing methods (12)
7.4 Purchasing services and supplies (14)
7.5 subcontracting calibration and testing work (15)
7.6 Traceability (15)
Sampling 7.7 (16)
7.8 verification, calibration and disposal of detecting objects (16)
7.9 verification, calibration and testing quality assurance (17)
7.10 original records and data processing (17)
7.11 Result Report (18)
8 Management System Improvement (19)
8.1 General (19)
8.2 Control nonconforming work (20)
8.3 Customer satisfaction and complaints (20)
8.4 Internal Audit (20)
8.5 corrective measures (20)
8.6 Preventive measures (21)
9 appraisal procedures (21)
9.1 Assessment Application (21)
9.2 Examination preparation (21)
9.3 assessing the implementation of (22)
9.4 Assessment Report (25)
9.5 verify the corrective action (25)
9.6 Evaluation of examination results (26)
After 10 Certificate supervision (26)
10.1 General (26)
10.2 Supervision and Inspection (26)
10.3 expire Review (26)
11 expansion item assessment (26)
11.1 expansion items (26)
11.2 expansion in programs (26)
11.3 expansion entry confirmation (27)
12 proficiency testing and other comparison (27)
12.1 other than the ability to verify and organizations (27)
12.2 proficiency testing and other comparison of participation (27)
Appendix A Assessment application form (28)
Appendix B Tabular assessment project (31)
Appendix C assessment and management system requirements specification document control checklist format (35)
Appendix D certificate issued by an appraisal report form format (40)
Annex E software/hardware group assessment evidence registration
|