Search result: JJF 1011-2006 (JJF 1011-1987 Older version)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| JJF 1011-2006 | English | 1979 |
Add to Cart
|
10 days [Need to translate]
|
Terminology and Definitions for Metrology of Force and Hardness
| Valid |
JJF 1011-2006
|
| JJF 1011-1987 | English | RFQ |
ASK
|
9 days [Need to translate]
|
Terminology and Definitions for Measurement of Force and Hardness
| Obsolete |
JJF 1011-1987
|
| Standard ID | JJF 1011-2006 (JJF1011-2006) | | Description (Translated English) | Terminology and Definitions for Metrology of Force and Hardness | | Sector / Industry | Metrology & Measurement Industry Standard | | Classification of Chinese Standard | A53 | | Classification of International Standard | 17.100 | | Word Count Estimation | 79,791 | | Date of Issue | 2006/12/8 | | Date of Implementation | 2007-03-08 | | Older Standard (superseded by this standard) | JJF 1011-1987 | | Drafting Organization | China measure Scientific Academy | | Administrative Organization | National strength, hardness measurement technology committee | | Regulation (derived from) | AQSIQ Announcement No. 187 of 2006 | | Summary | This standard applies to commonly measured force values ??and hardness. Including strength and hardness values ??measured general terms, the principle method of measurement, measurement standards and measuring instruments such content. |
JJF 1011-2006
Terminology and Definitions for Metrology of Force and Hardness
People's Republic of China National Measurement Specifications
Force values and hardness measurement terms and definitions
2006-12-08 released
2007-03-08 Implementation
General Administration of Quality Supervision, Inspection and Quarantine released
Force values and hardness measurement terms and definitions
Replacing JJF 1011-1987
This specification was approved by the General Administration of Quality Supervision, Inspection and Quarantine on December 08,.2006, and since
March 08,.2007 shall come into force.
Focal point. The national strength, hardness measurement Technical Committee
Main drafting units. China Institute of Metrology
Participated in the drafting unit. Jilin Institute of Metrology
Guangdong Institute of Metrology
This specification by the national strength, hardness measurement Technical Committee is responsible for interpretation
The main drafters of this procedure.
Li Qingzhong (China Institute of Metrology)
Zhou Peixian (China Institute of Metrology)
He Li (China Institute of Metrology)
Participate drafters.
Qu Zhuo (Jilin Province Institute of Metrology)
Ye Ming (China Institute of Metrology)
Peng Danyang (Guangdong Institute of Metrology)
Force values and hardness measurement terms and definitions
This specification is commonly used terms and definitions of force value and hardness, including general terms of force value and hardness measurement,
Management methods, measurement standards and measuring instruments and so on.
A force value
1 force base (standard) quasi machine
1.1 force force
Interactions between objects.
1.2 million gravitation universalgravitation
The mutual attraction between any two objects. The direction of the force along the two objects in the connection direction, size and
The mass of the two objects is proportional to the product and inversely proportional to the square of the distance between the two objects.
1.3 Gravity gravity
The Earth's attraction to an object and the force of this object with the centrifugal force caused by the Earth's rotation.
1.4 elastic force elastica
Two objects in direct contact with the elastic deformation occurs, the deformed objects trying to restore the original shape and size, between each other
Produced by the force.
1.5 gravity acceleration gravityacceleration
Acceleration caused by gravity near the surface of the earth.
1.6 Newton Newton
China's legal units of measurement units. The symbol is N, which is given in SI basic units
Kg · m · s-2.
1N is a force that causes a mass of 1 kg to produce an acceleration of 1 m/s2 in the direction of force.
Note. 1kgf = 9.80665N
1tf = 9806.65N
1dyn = 10-5N
1.7 force standard machine forcestandardmachine
Produce a standard force value for the verification, calibration dynamometer (or load cell), in line with national measurement technology
Regulatory machinery.
Note. The force standard machine usually has four types. static heavy type, lever type, hydraulic type and superposition type.
1.8 force reference machine primaryforcestandardmachine
The administrative department of measurement under the State Council is responsible for establishing, as a unit of recurrence and preservation of value, the highest national unity
Based on the force standard machine.
1.9 deadweight force standard machine deadweightforcestandardmachine-DWM
Take the gravity of the weight as a standard load, automatically and steadily load the load directly by the appropriate mechanism in a predetermined order
Force applied to the seized, school dynamometer (or load cell) on the standard machine.
......
|