Chinese Standards Shop Partner of Google-Books Database: 169759 (Nov 10, 2019)
 HOME   Quotation   Tax   Examples Standard-List   Contact-Us   View-Cart
  

JB/T 8816-1998

Chinese Standard: 'JB/T 8816-1998'
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusRelated Standard
JB/T 8816-1998English125 Add to Cart 0--15 minutes. Auto immediate delivery. Construction machinery - Drive axle - Technical specifications Obsolete JB/T 8816-1998

 JB/T 8816-1998 -- Click to view a PDF In 0~10 minutes time, full copy of this English-PDF will be auto-immediately delivered to your email by our cloud-server.  
Detail Information of JB/T 8816-1998; JB/T8816-1998; JBT 8816-1998; JBT8816-1998
Description (Translated English): Construction machinery. Drive axle. Technical specifications
Sector / Industry: Mechanical & Machinery Industry Standard (Recommended)
Classification of Chinese Standard: P97
Classification of International Standard: 53.100
Word Count Estimation: 13,000
Date of Issue: 1998-09-30
Date of Implementation: 1998-12-01
Older Standard (superseded by this standard): ZB J83014-89
Drafting Organization: Ministry of Machinery Industry Tianjin Engineering Machinery Research Institute
Administrative Organization: Ministry of Machinery Industry Engineering Machinery Standardization Technical Committee
Regulation (derived from): Ministry of Industry and Information Technology Bulletin No. 32 of 2014; Industry Standard Record Announcement No. 11 (No. 191) 2015; Industry-Science (2010) No. 77
Summary: This standard specifies construction machinery drive axle the technical requirements, test methods, inspection rules, marking, packaging, transportation, storage, quality guarantee period. This standard applies to Wheeled Construction Machinery common drive axle, steering axle.

JB/T 8816-1998
JBT8816-1998)
ICS 53.100
P 97
INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
Replacing ZB J83 014-89
Construction machinery — Drive axle —
Technical specifications
工程机械 驱动桥技术条件
ISSUED ON. SEPTEMBER 30, 1998
IMPLEMENTED ON. DECEMBER 01, 1998
Issued by. The State Administration of Machinery Industry
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Definitions ... 5
4 Technical requirements ... 6
5 Test methods ... 12
6 Inspection rules ... 15
7 Packaging, transportation and storage ... 17
8 Quality assurance ... 18
Annex A (Suggestive) The basic parameters of drive axle ... 19
Annex B (Suggestive) The basic parameters of drive axle of qualification ... 20
References and Original Chinese Documents ... 21
Foreword
This Standard is a revision to ZB J83 014-89 Construction machinery-Drive
axle-Technical specifications. Test section to ensure the quality of drive axle is added
into this Standard, and appropriate adjustment is made to the inspection items (or indexes)
and test methods for overall performance. And strengthen the coordination and integration
with other relevant industry standards, to make this Standard more perfect and practical.
Annex A and B are suggestive annexes.
This Standard shall replace ZB J83 014-89 from the implementation date.
This Standard is proposed and administered by the Construction Machinery Technical
Committee for Standardization of Ministry of Machine-building Industry.
This Standard is drafted by. Ministry of Machine-building Industry Tianjin Institute of
Engineering Machinery.
The main drafters of this Standard are. Chen Fenglan, Zhang Rongxin, and Gao Mingfa.
Construction machinery -- Drive axle -- Technical specifications
1 Scope
This Standard specifies the technical requirements, test methods, inspection rules,
marking, packaging, transportation, storage and quality guarantee period, etc. of
engineering machinery drive axle.
This Standard applies to general drive axle and steering drive axle of wheel type
construction machinery (steering knuckle and bearing parts excluded) (hereafter referred
to as the drive axle).
2 Normative References
The articles contained in the following documents have become part of this Standard
when they are quoted herein. For the dated documents so quoted, all the modifications or
revisions made thereafter shall not be applicable to this Standard. For the undated
documents so quoted, the latest editions shall be applicable to this Standard.
GB/T 1182-1996 Geometrical tolerance-Generalities, definitions, symbols, indications on
drawings
GB/T 1184-1996 Geometrical tolerance-Geometrical tolerances for features without
individual tolerance indications
GB 2828-87 Sampling procedures and tables for lot-by-lot inspection by attributes
(Apply to inspection of successive lots or batches)
GB 2829-87 Sampling procedures and tables for periodic inspection by attributes
(Apply to inspection of stability for productive process)
GB/T 3478.1-1995 Straight cylindrical involute splines-Modules, basic rack profiles and
tolerances
GB 10095-88 Accuracy of involute cylindrical gears
GB 11365-89 Accuracy of bevel and hypoid gears
GB/T 13306-91 Plates
GB 13319-91 Geometrical tolerance-Positional tolerance
JB/T 5928-91 Drive axle for engineering machinery - Stand testing method
and the phosphating film thickness and quality shall comply with the provisions specified
in the sample drawing.
4.4 Castings
4.4.1 Spheroidal graphite casting with strength of extension δb≥400N/mm2, elongation
δs≥10% are recommended to be used for final drive housing (hereinafter referred to as
carrier) and the left and right differential housing, plant carrier and hub. Technical
requirements shall comply with the provisions of JB/T 5938; mechanical properties shall
not be less than ZG270-500 cast steel for steel casting, and technical requirements shall
comply with the provisions of the JB/T 5939.
4.4.2 Cast steel with mechanical properties no less than ZG270-500 are
recommended to be used for axle housing, and technical requirements shall comply with
the provisions in JB/T 5939.
4.5 Requirements for machining parts
4.5.1 Axiality tolerance for planetary wheel axle hole of planetary carrier, cross axle
diameter hole of differential housing, two bearing holes of driving gear and two bearing
holes of driven gear on the bracket shall not be less than Grade 6. The rest shall not be
less than the size tolerance grade.
4.5.2 Vertical position tolerance for two wheel lines (a distance apart for hyperbolic
gear) in the bracket shall not be less than Grade 6; maximum allowed deviation for
intersection and maximum allowed deviation for offset shall comply with the provisions of
Table 17 of GB 11365-89 (namely, limit deviation for axial spacing).
4.5.3 Perpendicularity tolerance of two common axis of cross axle hole diameter in the
differential carrier shall not be less than Grade 7, and those two common axis shall be in
the same plane, and its position tolerance is 0.08mm.
4.5.4 The end face run-out tolerance of the end face counter shaft (hole) center-line
shall comply with.
For the bearing block shoulder. Not less than Grade 7 for Grade G bearing, Grade 6 for
Grade E bearing, and not less than Grade 8 for others.
4.5.5 Perpendicularity tolerance between base level and shaft center-line (hole) shall
not be less than Grade 7, and parallelism tolerance between base level and shaft
specifications, product certificate).
6.2 Sampling inspection
6.2.1 The sampling inspection is carried out according to the single sampling scheme
stipulated in GB 2828. The acceptable quality level (AQL) of Class A substandard drive
axle is 6.5, and the acceptable quality level (AQL) of Class B substandard drive axle is 6.5;
the acceptable quality level (AQL) of Class C substandard drive axle is 40; The inspection
level is general inspection level II, and the size of sampling words is selected according to
the production batch and the regulations of Table 2 of GB 2828-87, or determined by the
supply and requisitioning parties after negotiation. Specific inspection item are selected by
manufacture according to requirements of Chapter 4 or determined by supplier and
purchaser through mutual negotiations.
Notes
1 Class A unqualified items. Mean time between failures (MTBF), Validity (K1), User
Evaluation.
2 Class B unqualified items. Cleanliness, service life, acceptability of part
manufacturing, temperature of lubricating oil, oil leakage caused by seal failure.
3 Class C unqualified items. Noise, appearance quality, paint quality, permeability (no
dripping), looseness of fasteners.
6.2.2 Samples shall not be adjusted, repaired and replaced except maintenance in
accordance with the provisions after extracting seal until the end of inspection work.
6.2.3 Superior authority or the ordering party is entitled to select and inspect products,
and principles of selective acceptance shall meet the provisions of 6.2.1.
6.2.4 Processing of sample test result
Sampling inspection (including reliability test) index that can not meet the provisions of
this Standard, after consolidation within certain period of time, ......
Related standard:   JB/T 8816-2015  JB/T 8815-2014
   
 
Privacy   ···   Product Quality   ···   About Us   ···   Refund Policy   ···   Fair Trading   ···   Quick Response
Field Test Asia Limited | Taxed in Singapore: 201302277C | Copyright 2012-2019