|
US$1009.00 · In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email.
HYT141-2011: Specification for sea test of oceanographic instruments
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| HY/T 141-2011 | English | 1009 |
Add to Cart
|
7 days [Need to translate]
|
Specification for sea test of oceanographic instruments
| Valid |
HY/T 141-2011
|
PDF similar to HYT141-2011
Standard similar to HYT141-2011 GA/T 424 GA 1210 GA 1051 Basic data | Standard ID | HY/T 141-2011 (HY/T141-2011) | | Description (Translated English) | Specification for sea test of oceanographic instruments | | Sector / Industry | Marine Industry Standard (Recommended) | | Classification of Chinese Standard | A92 | | Classification of International Standard | 7.06 | | Word Count Estimation | 41,475 | | Date of Issue | 2/16/2011 | | Date of Implementation | 3/1/2011 | | Quoted Standard | GB/T 12763.1; GB/T 12763.2; GB/T 12763.3; GB/T 12763.4; GB/T 12763.5; GB/T 12763.6; GB/T 12763.7; GB/T 12763.8; GB/T 12763.9; GB/T 12763.10; GB/T 12763.11; GB/T 27025; HY/T 058, | | Regulation (derived from) | Industry Standard Filing Notice 2011 No. 6 (Overall No. 138) | | Issuing agency(ies) | State Oceanic Administration | | Summary | This standard specifies the basic marine instrument development program carried out during sea trials, the contract is signed, pre-test preparation, test execution, preparation of test reports, the basic requirements of the test results of the evaluation and acceptance. Suitable for the development phase of the organization and implementation of marine equipment at sea trials. | HYT141-2011: Specification for sea test of oceanographic instruments---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Specification for sea test of oceanographic instruments
ICS 07.060
A92
People's Republic of China Marine Industry Standard
Specification for offshore testing of marine instruments
Released on.2011-02-16
2011-03-01 implementation
Issued by the State Oceanic Administration
Table of contents
Preface Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Basic procedures for sea trials 2
4.1 Contract signing stage 2
4.2 Preparation stage 2
4.3 Implementation Phase 2
4.4 Report preparation stage 2
4.5 Results Evaluation and Acceptance Phase 2
5 Contract signing stage 3
5.1 Project Commission 3
5.2 Contract signing 3
5.3 Contract modification 3
6 Preparation stage 3 for sea trials
6.1 Preparation of marine test program 3
6.2 Preparation of marine test plan 4
6.3 Marine test personnel 4
6.4 Sea trial ship 5
6.5 Organization and management of marine trials 6
7 Sea trial stage 6
7.1 Implementation of offshore trial organization 6
7.2 Test work content 6
7.3 Quality control 8
8 Preparation stage of marine test report 9
8.1 Data compilation and sample analysis 9
8.2 Report preparation 9
8.3 Archiving of data and results 9
9 Test result evaluation and acceptance stage 10
9.1 Evaluation of results 10
9.2 Achievement acceptance 10
Appendix A (Normative Appendix) Format of the offshore test program for the test instrument 11
Appendix B (Normative Appendix) Format of the Marine Test Plan 16
Appendix C (Normative Appendix) Format of Quality Control Table for Offshore Tests 20
Appendix D (Normative Appendix) Format of Summary Table of Data Acquisition of Sea Test Voyage 30
Appendix E (Normative appendix) Format of offshore test report of test instruments 31
Appendix F (Normative Appendix) Format of Evaluation Form of Offshore Test Results 34
Reference 35
Foreword
This standard was drafted in accordance with the rules of GB/T 1.1-2009.
This standard was proposed by Ocean University of China.
This standard is under the jurisdiction of the National Marine Standardization Technical Committee (SAC/TC283).
Drafting organizations of this standard. Ocean University of China, National Oceanic Standards and Metrology Center, 710 Research Institute of China Shipbuilding Industry Corporation,
China Agenda 21 Management Center.
The main drafters of this standard. Wu Dexing, Guo Xinshun, Chen Xueen, Qian Hongbao, Xiang Changsheng, Zhao Zhongsheng, Yang Shimin, Li Yangang, Yuan Zhiwei,
Chen Yongxing, Yu Sheng, Han Xueshuang, Yang Baoqi, Gao Zhanke, Lei Jun.
Specification for offshore testing of marine instruments
1 Scope
This standard specifies the basic procedures, contract signing, pre-test preparations, and test procedures for marine tests conducted during the development of marine instruments.
Basic requirements for implementation, test report writing, test result evaluation and acceptance.
This standard is applicable to the organization and implementation of offshore tests of marine instruments in the development stage.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 12763.1 Marine Survey Specification Part 1.General
GB/T 12763.2 Marine Survey Specification Part 2.Marine Hydrological Observation
GB/T 12763.3 Specification for Marine Survey Part 3.Marine Meteorological Observation
GB/T 12763.4 Marine Survey Specification Part 4.Investigation of Seawater Chemical Elements
GB/T 12763.5 Ocean Survey Specification Part 5.Ocean Sound and Light Element Survey
GB/T 12763.6 Specification for Marine Survey Part 6.Marine Biological Survey
GB/T 12763.7 Ocean Survey Specification Part 7.Ocean Survey Data Exchange
GB/T 12763.8 Specification for Marine Survey Part 8.Marine Geology and Geophysical Survey
GB/T 12763.9 Marine Survey Specifications Part 9.Marine Ecological Survey Guidelines
GB/T 12763.10 Marine Survey Specification Part 10.Submarine Topography and Geomorphology Survey
GB/T 12763.11 Marine Survey Specification Part 11.Marine Engineering Geological Survey
GB/T 27025 General requirements for the competence of testing and calibration laboratories
HY/T 058 Marine survey, observation and monitoring archives business specification
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Oceanographicinstruments
Instruments used for ocean observation, sampling, and testing.
[HY/T 008-1992, definition 01-004]
3.2
Seatest
A test carried out on marine instruments in the development stage with a survey ship as a carrier.
3.3
Participating instruments instrumentsundertest
The collective term for various marine instruments, equipment, devices, software, systems and components that are participating in marine trials in the development stage.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of HYT141-2011_English be delivered?Answer: Upon your order, we will start to translate HYT141-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 7 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of HYT141-2011_English with my colleagues?Answer: Yes. The purchased PDF of HYT141-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|