|
US$609.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
HYT097-2007: Test method of in-situ sulfide analyzer
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| HY/T 097-2007 | English | 609 |
Add to Cart
|
4 days [Need to translate]
|
Test method of in-situ sulfide analyzer
| Valid |
HY/T 097-2007
|
Standard similar to HYT097-2007 HY/T 071 HY/T 037 HY/T 092 Basic data | Standard ID | HY/T 097-2007 (HY/T097-2007) | | Description (Translated English) | Test method of in-situ sulfide analyzer | | Sector / Industry | Marine Industry Standard (Recommended) | | Classification of Chinese Standard | N92 | | Classification of International Standard | 7.06 | | Word Count Estimation | 19,10 | | Date of Issue | 12/19/2007 | | Date of Implementation | 1/1/2008 | | Issuing agency(ies) | State Oceanic Administration | | Summary | This standard specifies the sulfide project site meter testing, testing equipment, testing environmental conditions, the detection method to detect and report writing requirements. This standard applies to polluted waters sulfide detection meter site. | HYT097-2007: Test method of in-situ sulfide analyzer---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test method of in-situ sulfide analyzer
ICS 07.060
N92
People's Republic of China Marine Industry Standard
HY/T 097-2007
Detection method of sulfide field measuring instrument
2007-12-19 released
Implementation of.2008-01-01
Issued by the State Oceanic Administration
Foreword
Appendix A and Appendix B of this standard are normative appendices, and Appendix C, Appendix D and Appendix E are informative appendices.
This standard was proposed by the National Oceanic Standards and Metrology Center.
This standard is under the jurisdiction of the National Marine Standardization Technical Committee (SAC/TC283).
Drafting organization of this standard. National Marine Standard Metrology Center.
The main drafters of this standard. Wang Cong, Wang Aijun, Sui Jun, Li Mingzhao.
HY/T 097-2007
Introduction
The sulfide field measuring instrument is a water quality monitoring instrument that measures the concentration of negative divalent sulphur in the water body. Its application range is high sulfide concentration.
In the 0.5 mg/L marine aquaculture area, sewage outlets and other seriously polluted sea areas. At present, it has gradually become a water quality survey, marine environmental protection, water
Important equipment for qualitative research and data acquisition. Over the years, a large number of on-site sulfide measuring instruments have been introduced for water quality surveys in China.
The relevant industry standards for testing methods make the instrument acceptance, inspection, and calibration unregulated, and the confidence and comparability of measurement data lack a unified judgment.
The broken basis has seriously affected the popularization and application of the instrument.
Therefore, in order to standardize the acceptance, inspection and calibration of sulfide measuring instruments and ensure the uniformity and reliability of survey data, it is necessary to formulate sulfur
Standard for detection method of chemical measuring instrument.
HY/T 097-2007
Detection method of sulfide field measuring instrument
1 scope
This standard specifies the testing items, testing equipment, testing environmental conditions and testing methods of sulfide field measuring instruments (hereinafter referred to as the instrument)
And the requirements for the preparation of test reports.
This standard applies to the detection of on-site sulfide meters in heavily polluted sea areas.
2 Normative references
The clauses in the following documents become clauses of this standard after being quoted. For dated reference documents, all subsequent
Amendments (not including errata content) or revisions do not apply to this standard. However, all parties that have reached an agreement based on this standard are encouraged to study
Is the latest version of these files available? For undated references, the latest version is applicable to this standard.
HY 016.2 Basic environmental test methods for marine instruments Low temperature test
HY 016.3 Basic environmental test methods for marine instruments Low temperature storage test
HY 016.4 Basic environmental test methods for marine instruments, high temperature test
HY 016.5 Basic environmental test methods for marine instruments, high temperature storage test
HY 016.8 Basic environmental test methods for marine instruments Alternating damp heat test
HY 016.11 Basic environmental test methods for marine instruments Vibration test
HY 016.12 Basic environmental test methods for marine instruments Impact test
HY 016.13 Basic environmental test method for marine instruments Continuous impact test
HY 016.14 Basic environmental test methods for marine instruments Tilt and roll test
HY 016.15 Basic environmental test methods for marine instruments Hydrostatic pressure test
3 Technical requirements
3.1 Appearance
The surface paint and coating of the instrument should be uniform in color, smooth and firm, and there should be no obvious scratches, cracks or damage that affect the normal performance test.
Appearance damage.
3.2 Measurement performance
The measurement performance requirements of the instrument are as follows.
a) Measuring range. (0～20) mg/L;
b) Indication error. ±0.5mg/L or ±10% of reading;
c) Response time. 3min.
4 Test items
The test items of the instrument are as follows.
a) Visual inspection;
b) The measurement performance test items are indication error test, response time test, repeatability test, and detection limit test;
c) Environmental adaptability testing.
5 Testing equipment
The measuring performance testing equipment of the instrument is shown in Table 1.
HY/T 097-2007
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of HYT097-2007_English be delivered?Answer: Upon your order, we will start to translate HYT097-2007_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of HYT097-2007_English with my colleagues?Answer: Yes. The purchased PDF of HYT097-2007_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|