|
US$199.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
HJ 761-2015: Solid waste. Determination of organic matter. Ignition loss method
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| HJ 761-2015 | English | 199 |
Add to Cart
|
3 days [Need to translate]
|
Solid waste. Determination of organic matter. Ignition loss method
| Valid |
HJ 761-2015
|
Standard similar to HJ 761-2015 HJ 511 HJ 945.3 HJ 943 Basic data | Standard ID | HJ 761-2015 (HJ761-2015) | | Description (Translated English) | Solid waste. Determination of organic matter. Ignition loss method | | Sector / Industry | Environmental Protection Industry Standard | | Word Count Estimation | 8,846 | | Date of Issue | 2015-10-22 | | Date of Implementation | 2015-12-01 | | Quoted Standard | HJ/T 20; CJ/T 313 | | Regulation (derived from) | Ministry of Environment Announcement 2015 No.62 | | Issuing agency(ies) | Ministry of Ecology and Environment | | Summary | This standard specifies the method for determination of solid waste by burning organic matter content reduction method. This standard applies to the determination of agricultural waste, garbage, kitchen waste, sewage sludge and other solid waste organic matter. When the sample volume is 0.5g, the detection limit of the standard 0.04%, the detection limit is 0.16%. | HJ 761-2015: Solid waste. Determination of organic matter. Ignition loss method---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Solid waste.Determination of organic matter.Ignition loss method
National Environmental Protection Standard of the People's Republic
Determination of organic matter in solid waste
Burning reduction method
Published on.2015-10-22
2015-12-01 Implementation
Ministry of Environmental Protection released
i directory
Foreword.ii
1 Scope.1
2 Normative references.1
3 Terms and Definitions 1
4 principle of the method.1
5 Instruments and equipment 1
6 sample 1
7 Analysis steps. 2
8 Calculation and representation of results. 2
9 precision..2
10 Quality Assurance and Quality Control..2
11 Waste treatment. 2
Foreword
To implement the Environmental Protection Law of the People's Republic of China and the Law of the People's Republic of China on the Prevention and Control of Environmental Pollution by Solid Waste
This standard is formulated to protect the environment, protect human health, and regulate the monitoring methods of organic matter in solid waste.
This standard specifies the method for determining the burning loss of organic matter in solid waste.
This standard is the first release.
This standard was formulated by the Science and Technology Standards Department of the Ministry of Environmental Protection.
This standard is mainly drafted by. Dalian University of Technology, Yuxing Technology Development (Shenzhen) Co., Ltd., China Environmental Protection Union
The Environmental Protection Technology Standards Research Committee and Beijing Shengbang Tianye Technology Co., Ltd.
This standard is verified by. Yingkou Environmental Monitoring Center Station, Shenyang Environmental Monitoring Center Station, and Anshan City Environmental Monitoring
Xinzhan, Liaoyang Environmental Monitoring Center Station, Panjin Environmental Monitoring Center Station, Benxi Environmental Monitoring Center Station.
This standard was approved by the Ministry of Environmental Protection on October 22,.2015.
This standard has been implemented since December 1,.2015.
This standard is explained by the Ministry of Environmental Protection.
1 Determination of organic matter in solid wastes by burning reduction method
Warning. All the heating processes involving solid waste in the experiment must be completed in the fume hood, and the operation should be carried out as required.
Wear protective gear.
1 Scope of application
This standard specifies the method for determining the organic matter content of solid waste by the ignition reduction method.
This standard applies to the determination of organic matter content in solid waste such as agricultural waste, domestic waste, kitchen waste, sludge, etc.
When the sampling amount is 0.5 g, the detection limit of this method is 0.04%, and the lower limit of detection is 0.16%.
2 Normative references
The contents of this standard refer to the following documents or their terms. For undated references, the valid version is appropriate.
Used in this standard.
HJ/T 20 Technical Specifications for Sampling and Sample Preparation of Industrial Solid Waste
CJ/T 313 Domestic waste sampling and analysis method
3 Terms and definitions
Organic matter of solid waste
Refers to organic matter that exists in various forms of carbon in solid waste. It includes residues of various animals and plants, microorganisms
And various products thereof which are decomposed and/or synthesized.
4 Principle of the method
The organic matter in the solid waste can be regarded as the weight loss of the dried sample at (600 ± 20) °C.
5 Instruments and equipment
5.1 Analytical balance. Accuracy is 0.0001 g.
5.2 High temperature muffle furnace. The temperature can be controlled at 600 °C ± 20 °C.
5.3 Electrothermal drying oven. The temperature can be controlled at 105 °C ± 5 °C.
5.4 Dryer. Contains a desiccant.
5.5 Porcelain crucible. 30 ml in volume, covered.
6 samples
6.1 Sampling
Performed in accordance with HJ/T 20 or CJ/T 313.
6.2 Sample preparation
When preparing the organic matter analysis sample, use the tweezers to remove the inactive substances such as plastics and stones in the air-dried sample, and grind to
All passed through a 0.25 mm aperture sieve, mixed and placed in a grinding bottle and stored at room temperature for testing.
27 Analysis steps
7.1 Burn the porcelain crucible (5.5) in a muffle furnace at 600 °C ± 20 °C to constant weight (the difference between two consecutive weighings is not large)
At 0.001 g).
7.2 Weigh the sample (6.2) 1 g (accurate to 0.0001 g), tile it in porcelain crucible (7.1), cover the lid halfway, and then place it
Place in an electric drying oven (5.3), bake at 105 ° C ± 5 ° C for 1 h, remove and transfer to a desiccator to cool to room temperature and weigh.
Repeat the above steps for inspective drying for 30 min each time until constant weight.
7.3 Weigh the dried sample (7.2) 0.5 g (accurate to 0.0001 g), tile it in porcelain crucible (7.1), cover the crucible, then
Then put it into the muffle furnace, after the temperature rises to 600 °C, burn it at 600 °C ± 20 °C for 3 h, remove it and then in the air.
After cooling for about 5 minutes, it was transferred to a desiccator, cooled to room temperature, and weighed. Repeat the above steps for an inspection burn, each time
30 min, until constant weight.
8 Calculation and representation of results
8.1 Calculation of results
The organic matter content w in the sample is calculated according to formula (1).
10010
Mmw (1)
In the formula.
W-dry organic matter content, %;
0m - the weight of the sputum and dried samples, g;
1m - 坩埚 and the weight of the dried sample after burning, g;
M-the mass of the dried sample, g;
100-unit conversion multiple.
8.2 Results representation
When the organic matter content in the solid waste is less than 1%, the result is retained to two decimal places, when the test result is greater than or equal to
At 1%, the calculation retains three significant digits.
9 precision
Six laboratories measured 12.6%, 33.3%, and 58.3% of actual samples, respectively, and the relative standard deviation in the laboratory.
They are. 3.1% to 5.0%, 1.1% to 2.7%, 1.0% to 2.8 %; the relative standard deviations between laboratories are.
4.1%, 1.3%, 0.8%; repeatability limits. 1.5%, 1.8%, 3.5%; reproducibility limits. 1.5%, 2.0%, 3.8%.
10 Quality Assurance and Quality Control
Take 10% to 20% of the sample for parallel sample. When the number of samples is less than 10, make at least one parallel sample of the sample.
The relative deviation of the results is not more than 5.0%.
11 Waste treatment
All waste generated during the experiment should be stored in a centralized manner and disposed of in accordance with relevant regulations.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of HJ 761-2015_English be delivered?Answer: Upon your order, we will start to translate HJ 761-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of HJ 761-2015_English with my colleagues?Answer: Yes. The purchased PDF of HJ 761-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|