|
US$334.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GBZ43482-2023: Hydraulic fluid power - Hose and hose assemblies - Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/Z 43482-2023 | English | 334 |
Add to Cart
|
4 days [Need to translate]
|
Hydraulic fluid power - Hose and hose assemblies - Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly
| Valid |
GB/Z 43482-2023
|
PDF similar to GBZ43482-2023
Basic data | Standard ID | GB/Z 43482-2023 (GB/Z43482-2023) | | Description (Translated English) | Hydraulic fluid power - Hose and hose assemblies - Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly | | Sector / Industry | National Standard | | Classification of Chinese Standard | J20 | | Classification of International Standard | 23.100.40 | | Word Count Estimation | 18,180 | | Date of Issue | 2023-12-28 | | Date of Implementation | 2024-07-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GBZ43482-2023: Hydraulic fluid power - Hose and hose assemblies - Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
GB /Z 43482-2023: Method for collecting fluid samples for analysis of cleanliness of hydraulic transmission hoses and hose assemblies
ICS 23:100:40
CCSJ20
National Standardization Guiding Technical Documents of the People's Republic of China
Hydraulic transmission hoses and hose assemblies
Methods of collecting fluid samples for analysis of cleanliness
(ISO /T S18409:2018,IDT)
Published on 2023-12-28
2024-07-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration Committee
Table of contents
Preface III
Introduction IV
1 Scope 1
2 Normative references 1
3 Terms and Definitions 2
4 Test preparation 3
5 Pollutant collection methods 3
5:1 General 3
5:2 Collection procedure by shaking method 4
5:3 Quick rinse collection procedure 5
6 Labeling instructions (quote this document) 5
Appendix A (informative) Selection of pollutant collection methods 6
Appendix B (normative) Determination of controlled volume and controlled surface 7
Appendix C (normative) Shaking method---Guidance on pouring and rotating the test piece and collecting the test fluid 8
C:1 Fill the test piece 8
C:2 Shake the test piece 8
C:3 Test liquid collection 9
Appendix D (normative) Requirements for sampling system of rapid flushing method 10
D:1 Overview10
D:2 Requirements for related components10
Reference 12
Foreword
This document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents"
Drafting:
This document is equivalent to ISO /T S18409:2018 "Hydraulic transmission hoses and hose assemblies collecting fluid samples for analysis of cleanliness"
Method", the document type was adjusted from ISO technical specifications to my country's national standardization guiding technical documents:
Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents:
This document is proposed by China Machinery Industry Federation:
This document is under the jurisdiction of the National Hydraulic and Pneumatic Standardization Technical Committee (SAC/TC3):
This document was drafted by: Shenzhen Kesten Hydraulic Equipment Co:, Ltd:, Guangzhou High-Speed Railway Measurement and Inspection Co:, Ltd:, Zhejiang Songqiao Gas
Hydraulic Hydraulic Co:, Ltd:, Jiangsu Yaokun Hydraulic Co:, Ltd:, Xiamen Qinghua Intelligent Transmission Co:, Ltd:, Jinan Hydraulic Pump Co:, Ltd:,
Ningbo Product and Food Quality Inspection Institute (Ningbo Fiber Inspection Institute), Beijing Machinery Industry Automation Research Institute Co:, Ltd:
The main drafters of this document: Wang Xueguo, Chen Guoguang, Lou Zhongyu, Zhou Feng, Liu Chuanfeng, Zheng Zhijian, Xie Shangbin, Cao Qiaohui:
Introduction
In hydraulic fluid power systems, power is transmitted and controlled through pressurized fluid in a closed circuit: In the circuit, fluid passes through
Pipes flow between components: Piping includes hoses and hose assemblies:
In a hydraulic system, fluid has the function of lubricating the moving parts of hydraulic components: Solid particles in hydraulic oil can cause component wear and lead to
Resulting in reduced efficiency, shortened component life and reduced reliability: Therefore, the contamination level of hydraulic oil is critical to the trouble-free operation of the system and extending its service life:
Life is very important:
The cleanliness of components after manufacturing and before being put into use must meet the requirements: Before installation, collect fluid samples from the hose or hose assembly:
Ben, analyze cleanliness:
Hydraulic transmission hoses and hose assemblies
Methods of collecting fluid samples for analysis of cleanliness
1 Scope
This document describes two methods for collecting fluid samples for analysis of hydraulic hoses or hose assemblies within a specified range of inside diameters and lengths:
Cleanliness:
This document is a specific application of ISO 18413:2015, see Appendix A and Appendix B:
The two methods given in this document are only suitable for collecting solid particle pollutants and are not suitable for collecting liquid or grease pollutants:
This document does not provide cleaning methods for hose assemblies during the production process:
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations
For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to
this document:
Note: GB/T 17484-1998 Identification and control of purification methods for hydraulic oil sampling containers (idtISO 3722:1976)
Note: GB/T 27613-2011 Hydraulic transmission liquid contamination is determined by weighing method (ISO 4405:1991, MOD)
Note: GB/T 14039-2002 Hydraulic transmission oil solid particle pollution level code (ISO 4406:1999, MOD)
ISO 4407 Hydraulic fluid contamination method for determination of particle contamination using optical microscopy (Hydraulicfluidpow-
opticalmicroscope)
Note: GB/T 20082-2006 Hydraulic transmission fluid contamination method for determining particle contamination using optical microscope (ISO 4407:2002, IDT)
Note: GB/T 12804-2011 Laboratory glass instrument measuring cylinder (ISO 4788:2005, NEQ)
Note: GB/T 17446-2012 Fluid transmission system and component vocabulary (ISO 5598:2008, IDT)
ISO 11500 Hydraulic transmission uses an automatic particle counting method based on the shading principle to determine the particle contamination of liquid samples (Hydraulicfluid
Note: GB/T 37163-2018 Hydraulic transmission uses an automatic particle counting method based on the shading principle to determine the particle contamination level of liquid samples (ISO 11500:2008,
MOD)
ISO 18413 Inspection documentation related to collection, analysis and data reporting of cleanliness and contamination of hydraulic transmission parts and components
|