HOME   Cart(12)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GBZ38434-2019 English PDF

US$2279.00 · In stock
Delivery: <= 11 days. True-PDF full-copy in English will be manually translated and delivered via email.
GBZ38434-2019: Metallic materials - Guide to test pieces preparation for mechanical testing
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/Z 38434-2019English2279 Add to Cart 11 days [Need to translate] Metallic materials - Guide to test pieces preparation for mechanical testing Valid GB/Z 38434-2019

PDF similar to GBZ38434-2019


Standard similar to GBZ38434-2019

GB/T 38769   GB/T 38806   GB/T 38719   GB/T 45597   GB/T 45169   

Basic data

Standard ID GB/Z 38434-2019 (GB/Z38434-2019)
Description (Translated English) Metallic materials - Guide to test pieces preparation for mechanical testing
Sector / Industry National Standard
Classification of Chinese Standard H22
Classification of International Standard 77.040.10
Word Count Estimation 114,116
Date of Issue 2019-12-31
Date of Implementation 2020-07-01
Issuing agency(ies) State Administration for Market Regulation, China National Standardization Administration

GBZ38434-2019: Metallic materials - Guide to test pieces preparation for mechanical testing

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
GB /Z 38434-2019 (Guidelines for the preparation of test specimens for mechanical properties of metallic materials) ICS 77.040.10 H22 National Standardization Technical Document of the People's Republic of China Guidelines for preparing test specimens for testing mechanical properties of metallic materials 2019-12-31 release 2020-07-01 implementation State Administration of Market Supervision Published by the National Standardization Administration

Contents

Foreword I Introduction Ⅱ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 Commonly used mechanical property test samples 1 5 Sample preparation 2 5.1 General requirements 2 5.2 Sample preparation process 3 5.3 General general equipment sample processing program 4 5.4 General CNC equipment sample processing programFive 5.5 Special CNC equipment sample processing program 6 5.6 Intelligent equipment sample processing program 8 Appendix A (Normative Appendix) Standard Samples of Common Mechanical and Process Performance 9 Appendix B (Informative) Introduction to Common CNC Equipment and Special CNC Equipment for Sample Processing 105 Appendix C (informative appendix) Cases of CNC equipment and process for special sample processing 107 Appendix D (Informative) Case Study of Mechanical Samples of Medium and Heavy Steel Plates with Different Equipment 108 References 111

Foreword

This guiding technical document was drafted in accordance with the rules given in GB/T 1.1-2009. This instructional technical document is proposed by China Iron and Steel Industry Association. This guiding technical document is under the jurisdiction of the National Steel Standardization Technical Committee (SAC/TC183). Drafting organization of this guiding technical document. Qiqihar Huagong Machine Tool Co., Ltd., Information Standard Research Institute of Metallurgical Industry, Baoshan Steel Iron and Steel Co., Ltd., Shanxi Taigang Stainless Steel Co., Ltd. Iron and Steel Company, Minmetals Yingkou Medium Plate Co., Ltd., Shandong Iron and Steel Co., Ltd. Laiwu Branch, Shandong Iron and Steel Group Rizhao Co., Ltd. Division, Shanghai Shenli Testing Machine Co., Ltd. The main drafters of this guiding technical document. Wang Hongliang, Zhou Lifu, Dong Li, Xu Weixing, Lian Xiaojie, Gao Yifei, Zhou Zhichao, Zhong Yangyang, Li Tao, Gao Lianghao, Yang Haoyuan, Xu Weicheng, Fang Jian, Wang Yan, Ren Yongxiu, Zhao Naisheng, Li Qinghua, Min Fanqi, Wang Kejie, Lin Xiaogang.

Introduction

The preparation of samples for mechanical properties testing involves many standards and regulations, such as testing standards, product standards, sample preparation equipment, sample preparation Process, sample processing method, etc. In order to regulate the correlation between the relevant regulations and standards for sample preparation, and to adapt to the development of sample preparation equipment and technology In accordance with the requirements of the national standardization reform, this guidance technical document was prepared. In order to increase the usefulness of this document, four appendices have been set up in this document. Appendix A describes the standard tests for commonly used mechanical properties tests. Sample, Appendix B introduces the common CNC equipment and special CNC equipment for mechanical sample processing, and Appendix C introduces the CNC equipment for some sample processing. Cases of equipment and different technological processes, Appendix D introduces the case of machining mechanical samples of medium and thick steel plates using different equipment. This document is available for each The mechanics laboratory is used as a reference when planning and designing, preparing sample processing procedures, and selecting processing equipment. Guidelines for preparing test specimens for testing mechanical properties of metallic materials

1 Scope

This guiding technical document gives the terms and definitions for the preparation of test specimens for the mechanical properties of metal materials, and provides common mechanical properties. Guidelines for test samples, sample preparation, sample processing equipment, processing procedures, etc. This instructional technical document is applicable to the mechanical property test of metal plates, bars, tubes, strips, profiles, castings, forgings, welding parts, etc. Preparation and processing of samples.

2 Normative references

The following documents are essential for the application of this document. For dated references, only the dated version applies to this article Pieces. For undated references, the latest version (including all amendments) applies to this document. GB/T 2975 Sampling locations and sample preparation for mechanical properties test of steel and steel products GB/T 10623 Terminology for mechanical properties test of metallic materials GB/T 20832 Identification of metal material sample axis relative to product texture

3 terms and definitions

The terms and definitions defined in GB/T 10623 and GB/T 2975 apply to this document.

4 Commonly used mechanical property test specimens

Names, reference standards, sample requirements, and standard sample drawings, scales of commonly used mechanical property test samples listed in this guidance technical document The dimensions, tolerances and corresponding processing methods are shown in Table 1 and Appendix A. Table 1 Test specimens for common mechanical properties The sample name refers to the standard sample requirements 1 Room temperature tensile test GB/T 228.1-2010 A.1 2 High temperature tensile test GB/T 228.2-2015 A.2 3 Thickness direction tensile test GB/T 5313-2010 A.3 4 Sheet and strip r-value and n-value samples GB/T 5027-2016 GB/T 5028-2008 A.4 5 Ductile iron tensile test GB/T 1348-2009 A.5 6 Samples of modulus of elasticity and Poisson's ratio GB/T 22315-2008 A.6 7 Stress corrosion corrosion uniaxial loading tensile test GB/T 15970.4-2000 A.7 8 Charpy pendulum impact test GB/T 229-2007 A.8 9 Room temperature compression specimen GB/T 7314-2017 A.9

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GBZ38434-2019_English be delivered?

Answer: Upon your order, we will start to translate GBZ38434-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 7 ~ 11 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GBZ38434-2019_English with my colleagues?

Answer: Yes. The purchased PDF of GBZ38434-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.