GB/T 9465: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 9465-2018 | English | 145 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Vehicle-mounted mobile elevating work platform
| Valid |
GB/T 9465-2018
|
| GB/T 9465-2008 | English | 839 |
Add to Cart
|
4 days [Need to translate]
|
Vehicle-mounted mobile elevating work platform
| Obsolete |
GB/T 9465-2008
|
| GB/T 9465.1-1988 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Classification for aerial platform
| Obsolete |
GB/T 9465.1-1988
|
PDF similar to GB/T 9465-2018
Basic data | Standard ID | GB/T 9465-2018 (GB/T9465-2018) | | Description (Translated English) | Vehicle-mounted mobile elevating work platform | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J80 | | Classification of International Standard | 53.020 | | Word Count Estimation | 26,215 | | Date of Issue | 2018-05-14 | | Date of Implementation | 2018-12-01 | | Older Standard (superseded by this standard) | GB/T 9465-2008 | | Regulation (derived from) | National Standards Announcement No. 6 of 2018 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 9465-2018: Vehicle-mounted mobile elevating work platform---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(High altitude truck)
ICS 53.020
J80
National Standards of People's Republic of China
Replace GB/T 9465-2008
Aerial work vehicle
Published on.2018-05-14
2018-12-01 implementation
State market supervision and administration
China National Standardization Administration issued
Content
Front I
1 Scope 1
2 Normative references 1
3 Terms and Definitions 2
4 Classification and Model 3
5 Requirements 3
6 Test method 10
7 Inspection rules 20
8 Marking, packaging, transport and storage 22
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 9465-2008 "High-altitude work vehicle". Compared with GB/T 9465-2008, except for editorial changes, mainly
The technical changes are as follows.
--- Removed the "Basic Parameter Series for Work Vehicles" requirement (see.2008 edition 4.3);
---Modified Chapter 3 aerial work vehicle, maximum working platform height, minimum working platform height, maximum working height, maximum operation
Amplitude, rated load definition, deleted the definition of aerial work platform (see.2008 edition 3.2), increased mobile lift work level
Taiwan (see 3.2), minimum operating height (see 3.7) definition;
---Working environment conditions increase the relative humidity regulations of insulated working vehicles (see 5.1.9);
--- Increased the requirements for the safety performance of modified vehicles (see 5.1.3, 5.1.5);
--- Increased the limit of the "outer edge speed" of the swing speed (see 5.8.3);
--- Revised the calculation requirements for stability and structural safety (see 5.3.3, 5.3.5);
--- Increased the safety provisions of the work platform (see 5.7.6, 5.7.12, 5.7.15), aerial work vehicles greater than 30m should be equipped with anemometer
(see 5.7.14), interlocking of the leg and extension structure (see 5.7.2), safety requirements for the safety of the rated load of the work vehicle (see
5.7.16~5.7.18);
--- Increased the safety performance requirements of hydraulic system actuators (see 5.4), improved the platform sinking capacity under rated load (see
5.8.5,.2008 edition 5.7.5);
--- Increased control requirements for electrical systems (see 5.5);
--- Revise the maximum working platform height error to 1% (see 5.8.6,.2008 version 5.7.6);
--- Increased 20kV, 500kV grade insulated aerial work vehicle content (see Table 3,.2008 edition table 4);
---The detection electrode is changed from "63kV or more folding arm type working vehicle" to "66kV and above working vehicle", the fixed position is
“100mm~150mm” was changed to “not less than 50mm” (see 5.10.1.1,.2008 edition 5.9.1);
--- Added the requirement of "equal potential connection ring for voltage equipotential working vehicle of 110kV and above" (see 5.10.1.2);
--- Removed the insulation working platform attribute "used as primary insulation and auxiliary insulation", removed the external insulation work platform wall thickness insulation power frequency
Withstand voltage test requirements, the applied voltage of preventive test and handover acceptance test is changed from "20kV" to "45kV", handover acceptance
The duration of the test was changed from "5min ± 5s" to "1min ± 5s" (see 5.10.2.2,.2008 edition 5.9.2.2);
---Insulated parts type test changed from "insulation arm" to "insulation arm and accessories" (see 5.10.3,.2008 version 5.9.3);
--- The test item of the basic arm insulation arm section (auxiliary insulation) is adjusted to be part of the insulation performance test of the whole vehicle.
Edge performance test (see 6.13.1);
--- Increased the withstand voltage and leakage current test items of the components after installation of the main insulation arm (see 6.13.1.1.2, 6.13.1.2);
--- Added a test example of the withstand voltage and leakage current of the telescopic arm type insulated car (see 6.13.1, 6.13.5);
--- Added auxiliary insulation boom test requirements (see 6.13.4);
--- Increased grounding device requirements for insulated aerial work vehicles (see 5.10.3.6);
--- Revised the number of cycles for the reliability test (see 5.12,.2008 version 5.11).
This standard was proposed by the China Machinery Industry Federation.
This standard is under the jurisdiction of the National Lifting Work Platform Standardization Technical Committee (SAC/TC335).
This standard was drafted. Xuzhou Hailunzhe Special Vehicle Co., Ltd., Hangzhou Aizhi Engineering Vehicle Co., Ltd., Beijing Construction Machinery
Institute of Chemical Research, Henan Minfa Special Vehicle Group Co., Ltd., Guangdong Special Equipment Inspection and Research Institute, Zhejiang Dingli Machinery Co., Ltd.
Hunan Xingbang Heavy Industry Co., Ltd., Shanghai Academy of Building Research, Henan Jianghe Special Vehicle Co., Ltd., Beijing Construction Machinery and Materials
Quality Supervision and Inspection Station, China Construction Education Association Construction Machinery Vocational Education Professional Committee, China Construction Machinery Industry Association decoration and high altitude
Working machinery branch.
The main drafters of this standard. Cai Lei, Zhang Renmin, Wang Donghong, Li Peiqi, Zhu Hao, Jiang Xiaojun, Xu Shugen, Wang Xiaolan, Han Wenhe, Zhu Jianxue,
Xie Yidong, Xing Jian, Liang Xianqi, Yin Wenjing, Li Jun, Zhang Yan, Han Li, Wang Kaihui, Wang Ping, Li Qi, Li Yujie, Zhang Sizhen.
The previous versions of this standard were released as follows.
---GB/T 9465.1-1988, GB/T 9465.2-1988, GB/T 9465.3-1988, GB/T 9465-2008.
Aerial work vehicle
1 Scope
This standard specifies the terms and definitions, classification and model, technical requirements, test methods, inspection rules, signs, packaging, and
Transportation and storage.
This standard is applicable to aerial work vehicles with a maximum working height of not more than 100m (hereinafter referred to as work vehicles).
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 507 insulation oil breakdown voltage measurement method
GB 1589 Car, trailer and car train profile size, axle load and mass limit
General rules and safety requirements for GB/T 3766 hydraulic drive systems and their components
GB 3847 Automotive Compression Ignition Engine and Compression Ignition Engine Exhaust Smoke Emission Limits and Measurement Methods
GB/T 4208-2017 enclosure protection grade (IP code)
GB 5226.1-2008 Mechanical electrical safety machinery and electrical equipment - Part 1. General technical conditions
GB 7258 Motorcycle Operation Safety Technical Conditions
General technical requirements for GB/T 7935 hydraulic components
GB/T 9969 General guidelines for the use of industrial products
GB 11567 Protection requirements for side and rear parts of automobiles and trailers
GB/T 12534 General rules for road test methods
GB/T 14039-2002 Hydraulic transmission oil solid particle pollution level code
GB/T 14048.5 Low-voltage switchgear and controlgear - Part 5-1. Electromechanical control of control circuit electrical and switching components
Circuit electrical appliance
GB/T 16927.1 High Voltage Test Technique Part 1. General Definitions and Test Requirements
GB 17691 Combustion-type, gas-fueled ignition engine and vehicle exhaust pollutant emission limits and measurement methods (China III,
IV, V stage)
GB 18352.5 Light vehicle pollutant emission limits and measurement methods (China Stage 5)
GB/T 20082 Hydraulic fluid transmission liquid contamination method for determining particle contamination by optical microscopy
GB/T 25849-2010 Mobile lifting work platform design calculation, safety requirements and test methods
GB/T 26473 crane truck crane safety requirements
GB/T 33081 mobile lifting platform operator control symbols and other markings
General technical conditions for JB/T 5937 construction machinery gray cast iron parts
General technical conditions for JB/T 5939 engineering machinery steel castings
General technical conditions for JB/T 5943 construction machinery welding parts
JB/T 5946 General technical conditions for engineering machinery painting
JB/T 12577 truck mounted crane
QC/T 252 special vehicle type test procedure
|