HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 9314-2011 English PDF

US$739.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 9314-2011: General specification of serial impact dot matrix printer
Status: Valid

GB/T 9314: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 9314-2011English739 Add to Cart 6 days [Need to translate] General specification of serial impact dot matrix printer Valid GB/T 9314-2011
GB/T 9314-1995English999 Add to Cart 6 days [Need to translate] General specification of serial impact dot matrix printer Obsolete GB/T 9314-1995
GB 9314-1988English999 Add to Cart 6 days [Need to translate] General specification of serial impact dot matrix printer Obsolete GB 9314-1988

PDF similar to GB/T 9314-2011


Standard similar to GB/T 9314-2011

GB/T 36092   GB/T 36101   GB/T 34973   GB/T 41182   GB/T 38621   GB/T 4313   

Basic data

Standard ID GB/T 9314-2011 (GB/T9314-2011)
Description (Translated English) General specification of serial impact dot matrix printer
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard L63
Classification of International Standard 35.180
Word Count Estimation 32,338
Date of Issue 2011-12-30
Date of Implementation 2012-06-01
Older Standard (superseded by this standard) GB/T 9314-1995
Quoted Standard GB/T 191; GB/T 1988; GB/T 2828.1; GB/T 3261; GB/T 4857.2; GB/T 4857.5; GB/T 4873; GB 4943.1; GB/T 5080.7; GB/T 6107; GB 9254; GB/T 17618; GB 17625.1; GB 18030; GB/T 18313-2001; GB/T 18455; GB 22322.1; SJ/T 11363; SJ/T 11364; SJ/T 11365; GB/T 3911
Regulation (derived from) Announcement of Newly Approved National Standards No. 23 of 2011
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the universal serial impact dot matrix printers of terms and definitions, requirements, test methods, quality assessment procedures, marking, packaging, transportation, storage and so on. This standard applies to universal serial impact dot matrix printers. This standard is the basis for the development of product standards. Dedicated serial impact dot matrix printer for implementation.

GB/T 9314-2011: General specification of serial impact dot matrix printer

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
General specification of serial impact dot matrix printer ICS 35.180 L63 National Standards of People's Republic of China Replacing GB/T 9314-1995 Serial impact dot matrix printer specifications Issued on. 2011-12-30 2012-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Preface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 Requirements 4 5 Test methods 10 6 Quality assessment procedures 16 7 signs, packaging, transportation and storage 18 Measurement Appendix A (normative) print speed of 19 Appendix B (normative) Measurement Accuracy 21 print Annex C (normative) Measurement of energy consumption limits 25 Annex D (normative) Classification and failure criterion 27

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 9314-1995 "serial impact dot matrix printer General technical requirements." This standard compared with GB/T 9314-1995, in addition to modify some editorial errors and inappropriate, the main changes are as follows. --- The name "serial impact dot matrix printer General technical conditions" to "serial impact dot matrix printers universal norms"; --- Increasing the scope of the standard, that is applicable to delete "without display function" universal serial impact dot matrix printers (see Section Chapter 1); --- Updated normative references, such as. GB 2312 changed to GB 18030, GB/T 2423.8 change GB/T 4857.2, GB/T 4857.5, GB 5007.1, GB 5007.2 GB 22322.1 changed to other documents (see Chapter 2); --- Increasing the normative references, such as. SJ/T 11363, SJ/T 11364, SJ/T 11365, GB/T 17618, GB 17625.1, GB/T 18313, GB/T 18455 and other documents (see Chapter 2); --- Remove the eight abrogated normative references, such as. GB/T 3909, GB 5792, GB 6833.2, GB 6833.3, GB 6833.4, GB 6833.5, GB 6833.6, GB 9655 and other documents; deleted file is no longer referenced, such as. GB 2787, GB 12508; delete the original file does not reference standard, such as. (See Chapter 2 in the 1995 edition) GB 6881, etc; --- Remove the "character printer", the definition of "kanji printer" "graphics printer", adding "serial impact dot matrix printer" Definition (see 3.1); --- Increased letter-quality, closed mode, sleep mode, etc. Definition (see 3.12,3.13,3.14); --- The 1995 version of the content by the "look and structure", "function", "Performance", "power adaptation", "security" and "Restriction of Hazardous Substances Amount "," energy "," environmental adaptability, "" electromagnetic compatibility "," reliability "and other new structural order has been adjusted (see 4.1, 4.2, 4.3,4.4,4.5,4.6,4.7,4.8,4.9,4.10); --- Increase universal serial bus and other interface requirements in 4.2.1; increased use commands to control spacing requirements in 4.2.4; --- An increase of 4.6 poisonous harmful substances, energy consumption of 4.7 and 5.7 test toxic and harmful substances, energy consumption test 5.8, and the original Terms of Reference have been adjusted; --- Updated the electromagnetic compatibility requirements and test methods (see 4.9,5.10); --- Will change the name "inspection rules" for "quality assessment procedures" (see 6); --- Will change "delivery inspection" and "routine tests" name "test batch" and "periodic inspection" and "quality conformance inspection" under (See 6.4); --- Modify the packaging and marking requirements, and storage warehouse manufacturing units increased fire protection requirements (see 7.1,7.4). --- Merged printer A, B, C classification, removed the 1995 edition of the Table 2, Table 3, Table 7, Table 8, Table 9, Table 13, Table 15, Table 4 and increase adjusted for the corresponding table continued; --- Given trip degrees, the alignment and simple and accurate test methods take the paper accumulated error, print speed (see Appendix A, Appendix B); --- Remove the 1995 edition Appendix C measurement noise, and Appendix sequence has been adjusted to increase the printing speed of the new Appendix A Energy measurement and measurement limits of Appendix C. Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents. This standard by the National Information Technology Standardization Technical Committee (SAC/TC28) and focal points. This standard was drafted. Nanjing Fujitsu Computer Equipment Co., Ltd., China Electronics Standardization Institute, the new interest rate yield Jiang Yuxin Co., Ltd., Fujian Start Computer Equipment Company, Jiangmen DASCOM Computer Peripheral Equipment Co., Ltd., Shanghai Putian Technology Co. Shares Post The company, Epson (China) Co., Yunnannantian Information Industry Co., Aerospace Information Co., Ltd. The main drafters of this standard. Li Xiaoqing, Minco Qi, Chen Liang Qijiang, Ming state, in the country Han, Zheng Minfeng, Yin pleased, Su Guo, Hu Wenyan. The previous versions of GB/T 9314 release of case. --- GB 9314-1988; --- GB/T 9314-1995. Serial impact dot matrix printer specifications

1 Scope

This standard specifies the terms and definitions universal serial impact dot matrix printers, requirements, test methods, quality assessment procedures and logo package Equipment, transportation, storage and so on. This standard applies to universal serial impact dot matrix printers (hereinafter referred to as the product). This standard is the basis for the development of product standards. Dedicated serial impact dot matrix printers for implementation.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 191 Packaging - Pictorial signs GB/T 1988 Technical information interchange bit coded character set GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan GB/T 3261 information processing print width of the ribbon braided Office machines and printers use GB/T 3911 information processing bit coded character set graphic representation of control characters GB/T 4857.2 Basic tests for transport packages - Part 2. Temperature and humidity conditioning GB/T 4857.5 packaging transport package drop test methods GB/T 4873 Information processing and transporting the continuous form size hole GB 4943.1 Security Information technology equipment - Part 1. General requirements GB/T 5080.7 Equipment reliability testing efficiency constant failure rate assumption under the MTBF of test plans GB/T 6107 using serial binary data interchange data terminal equipment and data circuit terminating equipment interfaces between Radio disturbance characteristics - Limits and methods of measurement GB 9254 information technology equipment GB/T 17618 Information technology equipment - Immunity characteristics - Limits and methods of measurement GB 17625.1 Electromagnetic Compatibility Limits for harmonic current emissions (equipment input current ≤16A) GB 18030 Information technology - Chinese coded character set Measurement GB/T 18313-2001 Acoustics IT and telecommunications equipment air noise GB/T 18455 Packaging Recycling Marks GB 22322.1 Information technology - Chinese coded character set 24 characters dot matrix font - Part 1. Arial SJ/T 11363 requirements for electronic information products Limited hazardous substances SJ/T 11364 Electronic Information Products Pollution Control Marking Requirements Detection SJ/T 11365 electronic information products of toxic and hazardous substances

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 Serial impact dot matrix printers serialimpactdotmatrixprinter Serial striking manner, through the ribbon to print out one or more of the lattice formed by combining meet the national standard font characters, or kanji point

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 9314-2011_English be delivered?

Answer: Upon your order, we will start to translate GB/T 9314-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 9314-2011_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 9314-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 9314-2011?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 9314-2011 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.