|
US$349.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 8336-2011: Special thread gauges for gas cylinders
Status: Valid GB/T 8336: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 8336-2011 | English | 349 |
Add to Cart
|
3 days [Need to translate]
|
Special thread gauges for gas cylinders
| Valid |
GB/T 8336-2011
|
| GB/T 8336-1998 | English | 559 |
Add to Cart
|
4 days [Need to translate]
|
Special thread gauges for gas cylinders
| Obsolete |
GB/T 8336-1998
|
| GB/T 8336-1987 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Special thread gauges for gas cylinders
| Obsolete |
GB/T 8336-1987
|
PDF similar to GB/T 8336-2011
Standard similar to GB/T 8336-2011 GB/T 8334 GB/T 9251 GB/T 9019 GB 8337 Basic data | Standard ID | GB/T 8336-2011 (GB/T8336-2011) | | Description (Translated English) | Special thread gauges for gas cylinders | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J74 | | Classification of International Standard | 23.020.30 | | Word Count Estimation | 15,146 | | Date of Issue | 2011-12-30 | | Date of Implementation | 2012-07-01 | | Older Standard (superseded by this standard) | GB/T 8336-1998 | | Quoted Standard | GB/T 1804; GB/T 3934; GB/T 6403.3; GB 8335; GB/T 13005 | | Adopted Standard | ISO 11363-2-2010, NEQ; DIN 477-7-1984, NEQ | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 23 of 2011 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the cylinder with thread gauge structure, size deviation, technical requirements, signs and so on. This standard applies to test GB 8335 " cylinders dedicated thread " in the provisions of the conical and cylindrical threads with thread gauge. | GB/T 8336-2011: Special thread gauges for gas cylinders---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Special thread gauges for gas cylinders
ICS 23.020.30
J74
National Standards of People's Republic of China
Replacing GB/T 8336-1998
Cylinders dedicated thread gauge
(ISO 11363-2.2010, Gascylinders-17Eand25Etaperthreadsforconnection
ofvalvestogascylinders-Part 2. Inspectiongauges, NEQ)
Issued on. 2011-12-30
2012-07-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
Accordance with the standards GB/T 1.1-2009. Drafting Rules "Standardization Guide Part 1 standard structure and preparation of" given.
This standard replaces GB/T 8336-1998 "dedicated cylinder thread gauge."
This standard and GB/T 8336-1998 compared to the main technical changes are as follows.
--- Change the taper thread gauge large diameter, the basic dimensions and limit deviations in diameter, small diameter;
--- Change the taper thread gauge flattened crest height and bottom teeth cutting depth;
--- Increased PZ30.3 thread size.
The standard reference method using redrafted ISO 11363-2.2010 "17E cylinder valve and cylinder connected to the first and 25E taper thread
Part 2. Inspection gauges "and DIN477-7. 1984" cylinder valve thread gauge "and ISO 11363-2.2010, DIN477-7. 1984 A
Consistency not equivalent.
This standard by the National Standardization Technical Committee cylinder (SAC/TC31) and focal points.
This standard was drafted. Beijing Tianhai Industry Co., Ltd., Shanghai Star to Environmental Protection Equipment Co., Ningbo Fuhua Valve Co., Ltd.,
Gimhae Technology Research Institute of Special Equipment Inspection, Shanghai High Pressure Container Co., Ltd.
The main drafters of this standard. Mengzeng Mao Mao Chong Ni, the birthplace of money, Sun Li, Chen Weiming, Guqiu Hua.
This standard replaces the standards previously issued as follows.
--- GB 8336-1987, GB/T 8336-1998.
Cylinders dedicated thread gauge
1 Scope
This standard specifies the gas cylinder thread gauge structure type, size deviation, technical requirements, signs and so on.
This standard applies to testing conical and cylindrical screw thread GB 8335 "dedicated thread cylinder" specified by the gauge.
Note. This standard specifies the values \u200b\u200bbased on standard measurement conditions prevail, namely. the temperature is 20 ℃, the measurement force is zero.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 1804 General tolerances Tolerances for linear and angular dimensions without individual tolerance
GB/T 3934 common thread gauge technical conditions
GB/T 6403.3 knurled
GB 8335 cylinders dedicated thread
GB/T 13005 cylinders term
3 Terms and definitions, symbols
3.1 Terms and Definitions
GB/T 13005 and established the following terms and definitions apply to this document.
NOTE. Cylindrical thread gauge code, characterized in reference to the provisions GB/T 3934's.
3.1.1
Taper smooth plug plaintaperpluggauge
Check the bottle inside the cylinder taper thread path, the amount of taper gauge.
3.1.2
Tapered smooth ring plaintaperringgauge
Check the cylinder valve external thread tail cone large diameter, taper gauge.
3.1.3
Tapered proofreading smooth plug plaintapermasterpluggauge
For proofreading tapered smooth ring size gauge.
3.1.4
Taper threaded plug taperplugscrewgauge
Check the volume within the cylinder finish taper thread diameter gauge.
3.1.5
Taper thread ring taperringscrewgauge
Check the amount of cylinder valves tail cone outer thread diameter gauge.
|