PDF Actual Sample: GB/T 9019-2015
| Standard ID | GB/T 9019-2015 (GB/T9019-2015) |
| Description (Translated English) | Nominal diameter for pressure vessels |
| Sector / Industry | National Standard (Recommended) |
| Classification of Chinese Standard | J74 |
| Classification of International Standard | 23.020.30 |
| Word Count Estimation | 5,521 |
| Date of Issue | 2015-12-10 |
| Date of Implementation | 2016-07-01 |
| Older Standard (superseded by this standard) | GB/T 9019-2001 |
| Drafting Organization | China Petrochemical Engineering Construction Co., Ltd.; China Special Equipment Inspection and Research Institute |
| Administrative Organization | China boiler pressure vessel Standardization Technical Committee (SAC/TC 262) |
| Regulation (derived from) | National Standard Announcement 2015 No.38 |
| Proposing organization | China boiler pressure vessel Standardization Technical Committee (SAC/TC 262) |
| Issuing agency(ies) | Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China; Standardization Administration of China |
| Summary | This standard specifies the nominal diameter of the pressure vessel series size. This standard applies to cylindrical pressure vessel. This standard does not apply to cylinders. |
ENGLISH: GB/T 9019-2015 (Translated) GB/T 9019-2015
GB
NATIONAL STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 23.020.30
J 74
Replacing GB/T 9019-2001
Nominal diameter for pressure vessels
压力容器公称直径
ISSUED ON. DECEMBER 10, 2015
IMPLEMENTED ON. JULY 1, 2016
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration Committee.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Nominal diameter for pressure vessels ... 4
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard replaces GB/T 9019-2001 Nominal diameter for pressure
vessels. Compared with GB/T 9109-2001, the main technical changes are as
follows.
- Added diameters between DN 6100 ~ DN 13200;
- For the nominal diameters between DN 6100 ~ DN 13200, a diameter
grade is defined for each 100 mm increment;
- Adjusted outer diameter for DN 150, DN 350, DN 400 pipes which take
outer diameter as the reference.
This Standard was proposed by and shall be under the jurisdiction of National
Technical Committee on Boiler Pressure Vessels of Standardization
Administration of China (SAC/TC 262).
The drafting organizations of this Standard. China Petrochemical Engineering
Construction Co., Ltd., China Special Equipment Inspection and Research
Institute.
Main drafters of this Standard. Duan Rui, Yang Guoyi, Xie Zhigang, Feng
Qingxiao.
This Standard replaces the following previous standards.
- GB/T 9019-1988, GB/T 9019-2001.
......