|
US$599.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 8013.3-2018: Anodic oxide coatings and organic polymer coatings on aluminium and its alloys -- Part 3: Organic polymer coatings
Status: Valid GB/T 8013.3: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 8013.3-2018 | English | 599 |
Add to Cart
|
5 days [Need to translate]
|
Anodic oxide coatings and organic polymer coatings on aluminium and its alloys -- Part 3: Organic polymer coatings
| Valid |
GB/T 8013.3-2018
|
| GB/T 8013.3-2007 | English | 558 |
Add to Cart
|
1 days [Need to translate]
|
Aluminum and aluminum anodic oxide coatings and organic polymer film -- Part 3: Organic polymer coatings
| Obsolete |
GB/T 8013.3-2007
|
PDF similar to GB/T 8013.3-2018
Basic data | Standard ID | GB/T 8013.3-2018 (GB/T8013.3-2018) | | Description (Translated English) | Anodic oxide coatings and organic polymer coatings on aluminium and its alloys -- Part 3: Organic polymer coatings | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | H60 | | Classification of International Standard | 25.220.01 | | Word Count Estimation | 30,386 | | Date of Issue | 2018-05-14 | | Date of Implementation | 2019-02-01 | | Older Standard (superseded by this standard) | GB/T 8013.3-2007 | | Regulation (derived from) | National Standards Announcement No. 6 of 2018 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 8013.3-2018: Anodic oxide coatings and organic polymer coatings on aluminium and its alloys -- Part 3: Organic polymer coatings
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Anodic oxide and organic polymer films for aluminium and aluminium alloys - Part 3. Organic polymer coatings)
ICS 25.220.01
H60
National Standards of People's Republic of China
Replace GB/T 8013.3-2007
Aluminum and aluminum alloy anodized film and organic polymer film
Part 3. Organic polymer coating
Part 3. Organicpolymercoatings
Published on.2018-05-14
Implementation of.2019-02-01
State market supervision and administration
China National Standardization Administration issued
Foreword
GB/T 8013 "Aluminum and aluminum alloy anodized film and organic polymer film" is divided into three parts.
---Part 1. Anodized film;
---Part 2. Anodized composite film;
--- Part 3. Organic polymer coating.
This part is the third part of GB/T 8013.
This part is drafted in accordance with the rules given in GB/T 1.1-2009.
This part replaces GB/T 8013.3-2007 "Aluminum and aluminium alloy anodized films and organic polymer films - Part 3. Organic polymerization
Spray film.
Compared with GB/T 8013.3-2007, the main technical changes in this part are as follows.
---Modified standard name (see cover, cover of.2007 edition);
--- Revised the applicable "scope" of this section (see Chapter 1, Chapter 1 of the.2007 edition);
---Modified "normative references" (see Chapter 2, Chapter 2 of the.2007 edition);
--- Removed "terms, definitions" (see Chapter 3 of the.2007 edition);
--- Added "classification" (see Chapter 3);
---Modified the content of "surface pretreatment" (see Chapter 4, Chapter 5 of the.2007 edition);
--- Modify "color and color difference" to "color difference" and modify the corresponding requirements (see 5.2,.2007 edition 4.2);
--- Change the "thickness" to "film thickness" and modify the corresponding requirements (see 4.4, 4.4 of.2007 edition);
--- Increased the performance requirements and test methods for "surface density" (see 5.5 and 6.5);
--- Modified the performance requirements of "hardness" (see 5.6, 4.5 of.2007 edition);
--- Modified the performance requirements of "wear resistance" (see 5.7, 4.6 of.2007 edition);
--- Revised the performance requirements and test methods for "anti-cupping" (see 5.8 and 6.9, 4.8 and 6.8 for.2007);
--- Revised the performance requirements and test methods for "bending resistance" (see 5.8 and 6.10,.2007 editions 4.9 and 6.9);
--- Increased the "flexibility" performance requirements and test methods (see 5.9 and 6.11);
--- Revised the performance requirements and test methods for "adhesion" (see 5.10 and 6.12,.2007 editions 4.10 and 6.10);
--- Removed the performance requirements and test methods for "Boiling water resistance" (4.11 and 6.11 of the.2007 edition);
--- Increased the performance requirements and test methods for "high pressure boilability" (see 5.11 and 6.13);
--- Increased the "temperature resistance" performance requirements and test methods (see 5.12 and 6.14);
--- Increased the performance requirements and test methods for "corrosion resistance to cyclic acid seawater salt spray" (see 5.13 and 6.15.1);
--- Revised the performance requirements and test methods for "salt-resistance to salt spray" (see 5.13 and 6.15.2, 4.13 and 6.13 for.2007);
--- Revised the performance requirements and test methods for "filamentous corrosion resistance" (see 5.13 and 6.15.4,.2007 editions 4.15 and 6.15);
--- Revised the performance requirements and test methods of "corrosion resistance to sulfur dioxide humid atmosphere" (see 5.13 and 6.15.5,.2007 edition)
4.16 and 6.16);
--- Increased the performance requirements and test methods for "corrosion resistance of flow-resistant gas mixtures" (see 5.13 and 6.15.6);
--- Added performance requirements and test methods for "spray/dry cycle corrosion resistance" (see 5.13 and 6.15.7);
--- Revised the "alkaline resistance" performance requirements and test methods (see 5.14 and 6.16.1,.2007 version 4.17 and 6.17);
--- Revised the performance requirements and test methods of "hydrochloric acid resistance" (see 5.14 and 6.16.5, 4.19 and 6.19 of.2007 edition);
--- Added "sulphuric acid resistance", "acetic acid resistance", "citric acid resistance", "cleaning resistance", "gasoline resistance" and "salt resistance"
Requirements and test methods (see 5.14, 6.16.2, 6.16.3, 6.16.4, 6.16.8, 6.16.9 and 6.16.10);
--- Revised the performance requirements and test methods for "solvent resistance" (see 5.15 and 6.17,.2007 editions 4.22 and 6.22);
--- Added performance requirements and test methods for "heat source test", "dry heat test" and "low temperature test" (see 5.16, 6.18.1.2, 6.18.2)
And 6.18.3);
--- Modify "heat and humidity resistance" to "constant temperature and humidity test" and modify the performance requirements, and "heat source test" "dry heat test" "low temperature test
"Test" is collectively referred to as "temperature and humidity resistance" (see 5.16, 6.18, see 4.12 and 6.12 of the.2007 edition);
--- Revised the performance requirements of "weatherability" (see 5.17, 4.23 of.2007 edition);
---Modified the contents of the "Inspection Rules" (see Chapter 7, Chapter 7 of the.2007 edition);
--- Increased dilution of the electrolyte spray/dry cycle salt spray test (see Appendix A).
This part was proposed by the China Nonferrous Metals Industry Association.
This part is under the jurisdiction of the National Nonferrous Metals Standardization Technical Committee (SAC/TC243).
This section drafted by. National Nonferrous Metals Quality Supervision and Inspection Center, Nonferrous Metals Technology and Economic Research Institute, Fujian Province Minfa Aluminum Industry Co., Ltd.
Co., Ltd., Foshan Sanshui Feng Aluminum Co., Ltd., Guangya Aluminum Co., Ltd., Fujian Nanping Aluminum Co., Ltd., Guangdong Jian
Alcoa Profiles (Group) Co., Ltd., Shandong Huajian Aluminum Group Co., Ltd., Jiangsu Xinfengyuan Decoration Materials Co., Ltd., Guangdong Huajiang Powder
End Technology Co., Ltd., Foshan Shunde Defusheng Metal Powder Co., Ltd., Guangdong Huachang Aluminum Factory Co., Ltd., Guangdong Guang Aluminum Aluminum Profile
Company, Guangdong Xingfa Aluminum Co., Ltd., Sichuan Samsung New Materials Technology Co., Ltd., Guangdong Industrial Analysis and Testing Center, Southeast Shandong
Shan Aluminum Co., Ltd.
The main drafters of this section. Hao Xuelong, Fan Zhiwei, Ge Lixin, Zhu Yaohui, Chen Hui, Pan Xuezhe, Liu Quanquan, Dai Yuexing, Zhang Hongliang,
Jiang Xuezhong, Cai Jinshu, Wu Qingsong, Tang Xingyu, Liu Huangping, Liang Jinpeng, Qi Yongtao, Ma Wenhua, Yan Wei, Sun Fengxian.
The previous versions of the standards replaced by this section are.
---GB/T 8013.3-2007.
Aluminum and aluminum alloy anodized film and organic polymer film
Part 3. Organic polymer coating
1 Scope
This part of GB/T 8013 specifies the classification, surface pretreatment, performance requirements and test methods of aluminum and aluminum alloy organic polymer coatings.
Law, inspection rules, etc.
This section applies to aluminum organic polymer coatings for machinery, municipal, transportation, electrical, packaging, construction and decoration.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 629 chemical reagent sodium hydroxide
GB/T 1720 paint film adhesion test method
GB/T 1731 paint film flexibility test
GB/T 1732 paint film impact resistance test method
GB/T 1733 paint film water resistance test method
GB/T 1734 paint film resistance to gasoline determination
GB/T 1740 paint film moisture resistance test
GB/T 1766 Paint and varnish coating aging rating method
GB/T 1865-2009 Painted and varnish artificial weathering and artificial radiation exposure filtered xenon arc radiation
GB/T 2423.51 Environmental testing - Part 2. Test method test Ke. Flow mixed gas corrosion test
GB/T 4893.2 Determination of the surface moisture resistance of furniture
GB/T 4893.3 Determination of dry heat resistance of furniture surfaces
GB/T 4893.4 Test methods for physical and chemical properties of paints -- Part 4. Adhesion cross-cutting method
GB/T 4957 Non-conductive coating on non-magnetic base metal, thickness measurement of eddy current method
GB/T 6461 Metal and other inorganic coatings on metal substrates after corrosion test samples and test pieces
GB/T 6682 Analytical laboratory water specifications and test methods
GB/T 6739 Paint and varnish pencil method for determination of film hardness
GB/T 6742 Paint and varnish bending test (cylindrical shaft)
Aluminium and aluminium alloy anodized films and organic polymeric films - Part 1
GB/T 9275 Paint and varnish Buckholtz indentation test
GB/T 9276 coating natural weather exposure test method
GB/T 9286 color and varnish paint film cross-cut test
GB/T 9753 paint and varnish cupping test
GB/T 9754 Determination of 20°, 60° and 85° specular gloss of paints and varnishes without metallic pigments
Visual colorimetric test of GB/T 9761 paint and varnish
GB/T 9789 Metal and other inorganic coatings are usually tested for sulfur dioxide corrosion under condensation conditions
GB/T 10125 artificial atmosphere corrosion test salt spray test
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 8013.3-2018_English be delivered?Answer: Upon your order, we will start to translate GB/T 8013.3-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 8013.3-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 8013.3-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 8013.3-2018?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 8013.3-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|