|
US$259.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 8005.2-2011: Terms of aluminium and aluminium alloys -- Part 2: Chemical analysis
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 8005.2-2011 | English | 259 |
Add to Cart
|
3 days [Need to translate]
|
Terms of aluminium and aluminium alloys -- Part 2: Chemical analysis
| Valid |
GB/T 8005.2-2011
|
PDF similar to GB/T 8005.2-2011
Basic data | Standard ID | GB/T 8005.2-2011 (GB/T8005.2-2011) | | Description (Translated English) | Terms of aluminium and aluminium alloys -- Part 2: Chemical analysis | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | H60 | | Classification of International Standard | 25.220.01 | | Word Count Estimation | 11,138 | | Date of Issue | 2011-05-12 | | Date of Implementation | 2012-02-01 | | Quoted Standard | GB/T 17433 | | Adopted Standard | EN 12258-2-2004, MOD | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 6 of 2011 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the aluminum and aluminum alloys with the chemical analysis of the relevant terminology. This section applies to the chemical analysis of aluminum and aluminum alloys. | GB/T 8005.2-2011: Terms of aluminium and aluminium alloys -- Part 2: Chemical analysis---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Terms of aluminium and aluminium alloys Part 2. Chemical analysis
ICS 25.220.01
H60
National Standards of People's Republic of China
Aluminum and aluminum alloys - Terms
Part 2. Chemical analysis
Part 2. Chemicalanalysis
Issued on. 2011-05-12
2012-02-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 8005 "aluminum and aluminum alloy term" is divided into three parts.
--- Part 1. Products;
--- Part 2. Chemical analysis;
--- Part 3. Surface treatment.
This section GB/T 8005 Part 2.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This section uses redrafted law reference EN12258-2.2004 "aluminum and aluminum alloy --- --- - Terms and definitions - Part 2. Chemical minutes
Analysis of "preparation, and EN12258-2.2004 for the modification of the degree of consistency adoption. And EN12258-2. compared to 2004, the main changes are as follows.
--- Increased Normative references GB/T 17433 "metallurgical products chemical analysis of the term";
--- Increase clause "3.54 Other terms and definitions";
--- Delete references to the ISO ;
--- Remove Appendix A.
The non-ferrous metal part by the National Standardization Technical Committee (SAC/TC243) centralized.
This section is drafted. Northeast Light Alloy Co., Ltd., China Nonferrous Metals Industry Standards and Metrology Institute for Quality.
The main drafters of this section. Zhou Bing, Xi Huan, Hu Zhimin, Liu Shuangqing, Wang Chao, Guo Rui, Hou Xiangdong, Wang Tao.
Aluminum and aluminum alloys - Terms
Part 2. Chemical analysis
1 Scope
This section provides aluminum and aluminum alloys with the chemical analysis of terminology.
This part applies to chemical analysis of aluminum and aluminum alloys in.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 17433 Basic terms of chemical analysis of metallurgical products
3 Terms and definitions
3.1
Accuracy accuracy
Measurement results are consistent with the degree of the true value of measuring true or conventions.
Note. when applied to a set of test results, "accuracy" includes the term (or describe) randomized part, common systematic error or bias section.
3.2
Addition correction additivecorrection; correctionbyaddition
Correction and interfering analyte measurement value proportional to the amount of the element [see equation (1)].
Icorr = I-kawinterferingelement (1)
Where.
Icorr --- correction of the measured value (strength);
I --- raw measurements (strength);
ka --- addition correction correction factor;
Content winterferingelement --- interfering elements.
NOTE. spectral interference, most of the lines superimposed on an addition correction reasons.
3.3
Analyte spectrum analyteline
Analyte atom or ion emission lines.
3.4
Analysis line analyticalline
For the determination of the amount of analyte or analyte mass spectrum.
NOTE. In a process of analysis of the analytical line is fixed.
3.5
Analysis program analyticalprogram
Analysis of a similar analysis of the sample matrix part, mainly in the form of computer programs or electronic documents, records analyzed in detail
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 8005.2-2011_English be delivered?Answer: Upon your order, we will start to translate GB/T 8005.2-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 8005.2-2011_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 8005.2-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|