|
US$114.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 7689.4-2013: Reinforcements -- Test method for woven fabrics -- Part 4: Determination of flexural stiffness
Status: Valid GB/T 7689.4: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 7689.4-2013 | English | 114 |
Add to Cart
|
3 days [Need to translate]
|
Reinforcements -- Test method for woven fabrics -- Part 4: Determination of flexural stiffness
| Valid |
GB/T 7689.4-2013
|
| GB/T 7689.4-2001 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Reinforcements -- Test method for woven fabrics -- Part: Determination of flexural stiffness
| Obsolete |
GB/T 7689.4-2001
|
| GB/T 7689.4-1989 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Textile glass--Woven fabrics--Determination of width and length
| Obsolete |
GB/T 7689.4-1989
|
PDF similar to GB/T 7689.4-2013
Basic data | Standard ID | GB/T 7689.4-2013 (GB/T7689.4-2013) | | Description (Translated English) | Reinforcements -- Test method for woven fabrics -- Part 4: Determination of flexural stiffness | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Q36 | | Classification of International Standard | 59.100.10 | | Word Count Estimation | 6,658 | | Older Standard (superseded by this standard) | GB/T 7689.4-2001 | | Quoted Standard | ISO 291; ISO 3374 | | Adopted Standard | ISO 4604-2011, IDT | | Regulation (derived from) | National Standards Bulletin 2013 No. 23 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the bending angle was measured with a fixed fabric reinforced flexural stiffness approach. This method does not apply to soft or have significant curl, reverse tendency or worn fabric. | GB/T 7689.4-2013: Reinforcements -- Test method for woven fabrics -- Part 4: Determination of flexural stiffness
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
. Reinforcements Test method for woven fabrics Part 4. Determination of flexural stiffness
ICS 59.100.10
Q36
National Standards of People's Republic of China
Replacing GB/T 7689.4-2001
Test method for woven fabrics reinforced
Determination of flexural stiffness. Part 4
Part 4. Determinationofflexuralstiffness
(ISO 4604.2011Reinforcementfabrics-
Fixed-angleflexometermethod, IDT)
Issued on. 2014-08-01 2013-11-27 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 7689 "Test method for woven fabrics reinforced" is divided into five sections.
--- Part 1. Determination of thickness;
--- Part 2. warp, weft density measurement;
--- Part 3. Determination of width and length;
--- Part 4. Determination of bending stiffness;
--- Part 5. Determination of breaking glass fiber tensile strength and elongation.
This part of GB/T 47689 Part of.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This Part replaces GB/T 7689.4-2001 "Enhanced Test methods for woven fabrics - Part 4. Determination of stiffness", and
GB/T 7689.4-2001 main differences are as follows.
--- Clear standard does not apply objects (see Chapter 1, Chapter 1 of the 2001 edition);
--- "Normative references" to remove the GB/T 18374-2001, increase the ISO 291 and ISO 3374 (see Chapter 2,
Chapter 2 of the 2001 edition);
--- Remove the "Definitions" chapter (see Chapter 3 of the 2001 edition);
--- After the principle of increasing the injection, indicating the source of the principles of the technology (see Chapter 3 of the note);
--- Temperature and humidity increase the limit on the mass changes (see Chapter 5, 2001 edition 7.2);
--- "Test report" increases the need to give the information [see Chapter 9 item h), i) and item j),].
This section uses the translation method identical with ISO 4604.2011 "Determination of fabric reinforced flexural stiffness of ordinary fixed-angle bend count
law".
Consistency correspondence between this part of international documents and normative references of our files are as follows.
--- GB/T 2918-1998 plastic sample conditioning and testing of the standard environment (ISO 291.1997, IDT);
--- GB/T 9914.3-2013 Enhanced Test methods - Part 3. Determination of mass per unit area (ISO 3374.2000,
MOD).
This part made the following editorial changes.
--- Consistent with the existing standard series, the standard name will be changed to "Reinforcements method for woven fabrics Part 4. bending stiffness
Determination of "degrees.
This part of the National Standardization Technical Committee fiberglass (SAC/TC245) centralized.
This section is responsible for drafting. Nanjing Fiberglass Research and Design Institute Limited, the national glass fiber product quality supervision and inspection center.
The main drafters of this section. Jian Tang, Madan, Fang Yunwei, Chen Shang, Chen Jianming, Huang Ying.
The previous versions of GB/T 7689.4-2001 release case.
--- GB/T 7689.5-1989.
Test method for woven fabrics reinforced
Determination of flexural stiffness. Part 4
1 Scope
GB/T 7689 This section specifies the method with a fixed angle of bending was measured by the bending stiffness of the reinforcing fabric.
This method does not apply to soft or significant curling, twisting tendency or worn fabric.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
ISO 291 environmental standard plastic sample conditioning and testing (Plastics-Standardatmospheresfor
conditioningandtesting)
ISO 3374 Standard Test Method for Determination of enhancing product quality felt and fabric unit area (Reinforcementpriducts-Mats
andFabrics-Determinationofmassperunitarea)
Principle 3
A rectangular strip specimen will be placed on a horizontal platform, which is perpendicular to the longitudinal direction of the front edge of the platform. Direction along the length of the specimen sample, so
Gradually increase the length of the sample extends under the action of gravity, this club slowly recurved, when the front end of the sample strip is bent to extend the platform surface
Of 41.5 ° in a plane, the projected length of the measuring portion.
According to the sample length and extending mass per unit area, calculated ordinary bending stiffness.
NOTE. This test method is based on the following two reports published in, ShirleyInstituteMemoirs Vol. 9 (1930), pp. 81 and Journalofthe
textileinstitute Volume 21 (1930), T380.
4 Instrument
4.1 meter fixed-angle bend, which constitutes shown in Figure 1.
On horizontal platform P has a sliding scale S, the upper surface of the slider has a scale in millimeters.
Slider lower surface layer of high friction anti-static material, such as rubber sheet. Upper surface of the horizontal platform P to be polished smooth, when the slider S
We can bring together the sample moves forward to move forward.
Slider width should be 25mm, length of at least 300mm, quality should be that every centimeter length 10g ± 2g.
When the leading edge of the horizontal platform P coincides with the leading edge of the slider S, S slider zero scale line and instrument baseline D coincide. Two engraved
On the transparent sidewalls of the instrument identification lines L1 and L2, and the leading edge of the horizontal platform P intersects with the composition while horizontal platform extension surface P into
41.5 ° of the plane.
Instrument measurement range is determined by its size, the size of the instrument should be sufficient to measure the length of the sample protruding portion.
4.2 template, having a size of 250mm × 25mm.
4.3 appropriate cutting tool.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 7689.4-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 7689.4-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 7689.4-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 7689.4-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 7689.4-2013?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 7689.4-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|