HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 7424.23-2021 English PDF

US$599.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 7424.23-2021: Optical fibre cable generic specification - Part 23: Basic optical cable test procedures - Cable element test methods
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 7424.23-2021English599 Add to Cart 5 days [Need to translate] Optical fibre cable generic specification - Part 23: Basic optical cable test procedures - Cable element test methods Valid GB/T 7424.23-2021

PDF similar to GB/T 7424.23-2021


Standard similar to GB/T 7424.23-2021

YD/T 2554.1   GB/T 9771.1   GB/T 20186.1   GB/T 7424.21   GB/T 7424.22   GB/T 7424.20   

Basic data

Standard ID GB/T 7424.23-2021 (GB/T7424.23-2021)
Description (Translated English) Optical fibre cable generic specification - Part 23: Basic optical cable test procedures - Cable element test methods
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard M33
Word Count Estimation 30,327
Issuing agency(ies) State Administration for Market Regulation, China National Standardization Administration

GB/T 7424.23-2021: Optical fibre cable generic specification - Part 23: Basic optical cable test procedures - Cable element test methods


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Optical fibre cable generic specification - Part 23.Basic optical cable test procedures - Cable element test methods ICS 33.180.10 M33 National Standards of People's Republic of China Partly replace GB/T 7424.2-2008 General Specification for Optical Cable Part 23.Basic test methods for optical fiber cables Test methods for optical cable components (IEC 60794-1-23.2019, Opticalfibrecables-Part 1-23.Genericspecification- Released on 2021-10-11 and implemented on 2022-02-01 State Administration of Market Supervision and Administration Issued by the National Standardization Management Committee

Table of contents

Foreword Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 Method G1.Bending of the optical unit in the optical cable 3 5 Method G2.Measurement of optical fiber ribbon geometry---observation method 3 6 Method G3.Optical fiber ribbon geometry measurement---hole gauge method 4 7 Method G5.Fiber ribbon tear (separability) 5 8 Method G6.Fiber Ribbon Twist 7 9 Method G7.Bending the casing 8 10 Method G8.Residual torsion test of optical fiber ribbon 10 11 Method G9.Oil Separation and Evaporation 11 12 Method G10.Fiber Peelability 12 13 Method G11.Tensile performance test of loose tube and microtube 16 Appendix A (informative appendix) Structural changes in this part compared with IEC 60794-1-23.2019 24 References 25

Foreword

GB/T 7424 is divided into the following 9 parts. ---Optical Cable General Specification Part 1.General; ---General Specification for Optical Cables Part 20.General Principles and Definitions of Basic Test Methods for Optical Cables; ---General Specification for Optical Cables Part 21.Basic Test Methods for Optical Cables, Mechanical Performance Test Methods; ---General Specification for Optical Cables Part 22.Basic Test Methods for Optical Cables, Environmental Performance Test Methods; ---General Specification for Optical Cables Part 23.Basic Test Methods for Optical Cables Test Methods for Optical Cable Components; ---General Specification for Optical Cables Part 24.Basic Test Methods for Optical Cables, Electrical Test Methods; ---Optical Cable Part 3.Sectional Specification for Outdoor Optical Cable; ---Optical Cable Part 4-1.Sectional Specification Optical Fiber Composite Overhead Ground Wire; ---Optical Cable Part 5.Sectional Specification for Miniature Optical Cable and Optical Fiber Unit for Air Blown Installation. This part is part 23 of GB/T 7424. This section was drafted in accordance with the rules given in GB/T 1.1-2009. GB/T 7424.20~GB/T 7424.24 jointly replace GB/T 7424.2-2008 "General Specification for Optical Cable Part 2.Optical Cable Basic experiment method". This part replaces Chapter 29~Chapter 35 in GB/T 7424.2-2008.This part and GB/T 7424.2-2008 Compared with Chapter 29~Chapter 35, the main technical changes are as follows. ---Added terms and definitions (see Chapter 3); ---Modified the test name of Method G1 (see Chapter 4, Chapter 29 of the.2008 edition); --- Deleted method G4 "the dial gauge method of optical fiber ribbon size" (see Chapter 32 of the.2008 edition); ---Modified the sampling process of method G5 sample (see 7.2, 33.2 of the.2008 edition); ---Modified the requirements of Method G5 (see 7.5, 33.5 in the.2008 edition); ---Added the details to be specified in Method G6 (see 8.6); --- Deleted "a hot fan (optional)" in the method G7 device (see 35.3 in the.2008 edition); ---Deleted the provision of using a hot fan to flatten the sample in the method G7 procedure (see 35.4 of the.2008 edition); ---The recommended size of the test equipment in Method G7 (see Table 1 in 9.3) has been added, and the test equipment and procedures have been supplemented. Charge (see 9.4); --- Added G8 "Fiber Ribbon Residual Torsion Test" (see Chapter 10); --- Added G9 "Oil Separation and Evaporation" (see Chapter 11); --- Added G10 "fiber strippability" and the three methods included G10A, G10B and G10C (see Chapter 12); --- Added G11 "Tensile Performance Test of Loose Tube and Microtube" and the included G11A and G11B methods (see Chapter 13). This part uses the redrafting method to modify and adopt IEC 60794-1-23.2019 ``Optical Cable Part 1-23.General Specification for Optical Cable Basic Test Test method of optical cable component test method". Compared with IEC 60794-1-23.2019, this part has many structural adjustments. Appendix A lists this part and IEC 60794- 1-23..2019 chapter number comparison list. The technical differences between this part and IEC 60794-1-23.2019 and the reasons are as follows. ---Regarding normative reference documents, this section has made adjustments with technical differences to adapt to China's technical conditions and adjustments. The situation is collectively reflected in Chapter 2 "Normative Reference Documents", and the specific adjustments are as follows. ● Replace IEC 60794-1-22.2017 (see 12.1.4, 12.3.4); ● Replace IEC 60793-1-32 (see 12.1.3, 12.1.4) with GB/T 15972.32, which is modified to adopt international standards; ● Replace IEC 60793-1-40 (see 4.3) with GB/T 15972.40 modified to adopt international standards; ● Replace IEC 60793-1-46 (see 4.3) with GB/T 15972.46 modified to adopt international standards; ● Added reference to GB/T 2951.11-2008 (see 13.1.2.4.2); ● Added reference to GB/T 2951.12-2008 (see 13.1.1, 13.1.2.5); ● Added reference to GB/T 2951.13-2008 (see 13.1.2.4.2); ● Added reference to GB/T 7424.20-2021 (see 9.4, 12.2.6); ● Added reference to IEC 60794-1-1.2015 (see Chapter 3); ● Removed IEC 60794-1-2; ● Removed IEC 60794-1-31.2018; ● Removed IEC 60811-401; --- Added Chapter 3 terms and definitions; ---Deleted IEC 60794-1-23.2019 Chapter 4 "General Requirements"; ---5.5 The width, thickness and fiber arrangement requirements of the optical fiber ribbon are revised to "should comply with the relevant optical fiber ribbon specifications"; ---Modified Figure 1 in IEC 60794-1-23.2019, and moved its 6.7 "Definition of Optical Fiber Ribbon Geometry" to 3.3; ---8.6 "Specimen length" and "rotation method" are added to the details to be specified; --- In 9.4, the test environmental conditions are revised to "shall meet the requirements of the loose test conditions in GB/T 7424.20-2021"; ---10.6 The "number of samples to be tested" has been added to the details to be specified; - In 12.2.6, the test environmental conditions are revised to "shall meet the requirements of the loose test conditions in GB/T 7424.20-2021"; ----13.1.1 and 13.1.2.5 modify the sample aging treatment requirements to "in accordance with the requirements of GB/T 2951.12-2008"; ----13.1.2.4.2 adds the measurement requirements for the thickness, outer diameter and density of the loose tube; ----13.1.5 adds the requirement of "measurement result should take the middle value". This section also made the following editorial changes. --- Modify the standard name to "General Specification for Optical Cables Part 23.Basic Test Methods for Optical Cables, Test Methods for Optical Cable Components"; --- In 8.4, a note about the rotation mode and number of optical fiber ribbons has been added; ----13.1.1 Amend Note 1 to "This test is included in GB/T 2951.11-2008"; ---13.1.2.3.1d) In the Note, the reference test method is amended to "For example, the ozone resistance test carried out in accordance with GB/T 2951.21-2008 Test and immersion mineral oil test"; ----13.2.1 Amend Note 1 to "This test is included in GB/T 2951.14-2008". Please note that some of the contents of this document may involve patents. The issuing agency of this document is not responsible for identifying these patents. This part was proposed by the Ministry of Industry and Information Technology of the People's Republic of China. This part is under the jurisdiction of the National Communication Standardization Technical Committee (SAC/TC485). Drafting organizations of this section. Sichuan Huiyuan Optical Communication Co., Ltd., Chengdu Tairui Communication Equipment Inspection Co., Ltd., Chengdu Datang Cable Co., Ltd. Company, YOFC Optical Fiber and Cable Co., Ltd., Jiangsu Yongding Co., Ltd., Jiangsu Hengtong Optoelectronics Co., Ltd., China Information Communication Technology Group Co., Ltd., Jiangsu South Communication Technology Co., Ltd., Tongding Internet Information Co., Ltd., Jiangsu Zhongtian Technology Co., Ltd. company. The main drafters of this section. Zhao Qiuxiang, Luo Yi, Song Zhituo, Xue Mengchi, Shi Bin, Chen Xiaohong, Liu Cheng, Li Jing, Huang Zhengou, Peng Yuan, Duan Jianbin, Sun Guofang, Zhou Dao, Ge Yongxin, Liu Yuqin. The previous releases of the standards replaced by this part are as follows. ---GB/T 7425 (all parts)-1987, GB/T 8405 (all parts)-1987; ---GB/T 7424.1-1998 Chapter 3 and Chapter 6; ---GB/T 7424.2-2002; --- Chapter 29~Chapter 35 of GB/T 7424.2-2008. General Specification for Optical Cable Part 23.Basic test methods for optical fiber cables Test methods for optical cable components

1 Scope

This part of GB/T 7424 specifies the purpose, samples, equipment, procedures, requirements and details to be specified for each test method of optical cable components. Festival etc. This section applies to optical cable components in optical cables and optical-electric hybrid cables.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article Pieces. For undated reference documents, the latest version (including all amendments) is applicable to this document. GB/T 2951.11-2008 General test methods for insulation and sheath materials of electric and optical cables-Part 11.General test methods Thickness and dimensions measurement mechanical performance test (IEC 60811-1-1.2001, IDT) GB/T 2951.12-2008 General test methods for insulation and sheath materials of electric and optical cables-Part 12.General test methods Thermal aging test method (IEC 60811-1-2.1985, IDT) GB/T 2951.13-2008 General test methods for insulation and sheath materials of electric and optical cables-Part 13.General test methods Density determination method Water absorption test Shrinkage test (IEC 60811-1-3.2001, IDT) GB/T 7424.20-2021 General Specification for Optical Cables Part 20.General Principles and Definitions of Basic Test Methods for Optical Cables (IEC 60794-1- 2.2017, MOD) GB/T 7424.22-2021 General Specification for Optical Fiber Cables Part 22.Basic Test Methods for Optical Cables Environmental Performance Test Methods (IEC 60794-1-22.2017, MOD) GB/T 15972.32 Specification for optical fiber test methods Part 32.Measurement methods and test procedures for mechanical properties The coating can be peeled off (GB/T 15972.32-2008, IEC 60793-1-32.2001, MOD) GB/T 15972.40 Specification for optical fiber test methods Part 40.Measurement methods and test procedures for transmission characteristics and optical characteristics Attenuation (GB/T 15972.40-2008, IEC 60793-1-40.2001, MOD) GB/T 15972.46 Specification for optical fiber test methods Part 46.Measurement methods and test procedures for transmission characteristics and optical characteristics Transmittance change (GB/T 15972.46-2008, IEC 60793-1-46.2001, MOD) IEC 60794-1-1.2015 Optical fiber cable Part 1-1.General specification (Opticalfibrecables-Part 1-1.Generic specification-General)

3 Terms and definitions

The following terms and definitions defined in IEC 60794-1-1.2015 and are applicable to this document. For ease of use, the following is repeated Some terms and definitions in IEC 60794-1-1.2015. 3.1 Cable element Among the components of the optical cable, the unit body is designed according to the application scenario, which contains the optical fiber and has a certain protective effect on the optical fiber. Note. The unit body usually refers to loose tube fiber, tight buffer fiber, fiber ribbon, branch unit, etc.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 7424.23-2021_English be delivered?

Answer: Upon your order, we will start to translate GB/T 7424.23-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 7424.23-2021_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 7424.23-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.