GB/T 7386: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 7386-2008 | English | RFQ |
ASK
|
5 days [Need to translate]
|
Co-ordination of dimension in Ship accommodation
| Obsolete |
GB/T 7386-2008
|
| GB/T 7386.1-1987 | English | 359 |
Add to Cart
|
3 days [Need to translate]
|
Co-ordination of dimensions in Ship accommodation--Principles of dimensional co-ordination
| Obsolete |
GB/T 7386.1-1987
|
PDF similar to GB/T 7386-2008
Basic data | Standard ID | GB/T 7386-2008 (GB/T7386-2008) | | Description (Translated English) | Co-ordination of dimension in Ship accommodation | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | U04 | | Classification of International Standard | 47.020 | | Word Count Estimation | 30,359 | | Date of Issue | 2008-02-14 | | Date of Implementation | 2008-09-01 | | Older Standard (superseded by this standard) | GB/T 7386.1-1987; GB/T 7386.2-1987; GB/T 7386.3-1987; GB/T 7386.4-1987 | | Regulation (derived from) | National Standard Approval Announcement 2008 No.2 (Total No.115) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the principles of ships' accommodation -scale coordination, foundation, controlled reference system, control determines line and control scales, component positioning, components and indicates the size of the selection and assembly, coordination of equipment, such as the size of the main furniture. | GB/T 7386-2008: Co-ordination of dimension in Ship accommodation---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Co-ordination of dimension in ships' accommodation
ICS 47.020
U04
National Standards of People's Republic of China
Replacing GB/T 7386.1 ~ 7386.4-1987
Scale coordination ships' accommodation
Posted 2008-02-14
2008-09-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Terms and definitions, symbols 1
3 Coordination Principle 4
Base 4 scale coordination 4
5 5 Control reference system
OK 6 control lines 7
7 controls the scale determined 8
8 positioning element 10
9 elements and components choice of size and assembly 14
Coordination Size 10 major furniture and equipment 15
Application Examples Appendix A (informative) grid 16
The preferred size of Appendix B (informative) mainly furniture and equipment 22
Foreword
This standard replaces GB/T 7386.1 ~ 7386.4-1987 "ships' accommodation scale coordination."
This standard compared with GB/T 7386.1 ~ 7386.4-1987, mainly for the following changes.
--- The GB/T 7386.1 ~ 7386.4 four parts into one standard;
--- Simplified or canceled some narrative provisions;
--- APPENDIX A practical example of the arrangement of Figure switch to modern ship layout.
The Standard Appendix A and Appendix B are informative.
The standard proposed by China State Shipbuilding Corporation.
This standard by the National Standardization Technical Committee boat marine vessels based at the Technical Committee.
This standard was drafted. China Shipbuilding Technology and Economy Research Institute, Shanghai Ship Research Institute.
The main drafters of this standard. Zhao Hua, Chen Fengnian, Gao Feng, Chen greatly.
This standard replaces the standards previously issued as follows.
--- GB/T 7386.1-1987, GB/T 7386.2-1987, GB/T 7386.3-1987, GB/T 7386.4-1987.
Scale coordination ships' accommodation
1 Scope
This standard specifies the dimensions in ships' accommodation coordination principle, the basis of the reference control system, control lines and determine a measure of control, elements set
Position, the choice of components and component dimensions and assembly, coordination of equipment, such as the size of the main furniture.
This standard applies to civilian ships' accommodation designed and furnished.
2 Terms and definitions, symbols
2.1 Terms and Definitions
The following terms and definitions apply to this standard.
2.1.1
Using a series of scales to determine the elements and components of the process and its associated structure size.
2.1.2
Using the basic modulus, modulus times the scale, the number of parting and the modulus of reference for coordination.
2.1.3
Scale coordination in selected size increments.
2.1.4
Digital-analog scale coordination under the preferred sequence.
2.1.5
Modular system used in the basic modulus. This standard is the basic form of a value of 100mm.
2.1.6
The basic shape modulus modulus times, like any natural number including 1, including.
2.1.7
The modulus divided by the number of the fundamental mode.
2.1.8
To determine the size of the associated components and (or) components and (or) the position of the point, line, surface consisting of system.
2.1.9
To determine the point size of the associated components and (or) components and (or) position.
2.1.10
Related components used to determine the wire size and (or) components and (or) position.
|