HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (12 Oct 2025)

GB/T 6111-2018 English PDF

US$439.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 6111-2018: Thermoplastics piping systems for the conveyance of fluids -- Determination of the resistance to internal pressure
Status: Valid

GB/T 6111: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 6111-2018English439 Add to Cart 4 days [Need to translate] Thermoplastics piping systems for the conveyance of fluids -- Determination of the resistance to internal pressure Valid GB/T 6111-2018
GB/T 6111-2003English120 Add to Cart 0--9 seconds. Auto-delivery Thermoplastics pipes for the conveyance of fluids -- Resistance to internal pressure -- Test method Obsolete GB/T 6111-2003
GB/T 6111-1985English199 Add to Cart 2 days [Need to translate] Standard test method for time-to-failure of thermoplastic pipe under constant internal pressure Obsolete GB/T 6111-1985

PDF similar to GB/T 6111-2018


Standard similar to GB/T 6111-2018

GB/T 3830   GB/T 8801   GB/T 5836.2   GB/T 4455   

Basic data

Standard ID GB/T 6111-2018 (GB/T6111-2018)
Description (Translated English) Thermoplastics piping systems for the conveyance of fluids -- Determination of the resistance to internal pressure
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard G33
Classification of International Standard 83.140.30
Word Count Estimation 22,217
Date of Issue 2018-03-15
Date of Implementation 2018-10-01
Issuing agency(ies) State Administration for Market Regulation, China National Standardization Administration

GB/T 6111-2018: Thermoplastics piping systems for the conveyance of fluids -- Determination of the resistance to internal pressure


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Thermoplastics piping systems for the conveyance of fluids--Determination of the resistance to internal pressure ICS 83.140.30 G33 National Standards of People's Republic of China Replacing GB/T 6111-2003 Thermoplastic pipe system for fluid delivery Resistance to internal pressure (ISO 1167-1.2006, Thermoplasticspipes, fittingsandassembliesfor Part 1.General method;ISO 1167-2.2006,Thermoplasticspipes,fittingsand internalpressure-Part 2.Preparationofpipetestpieces;ISO 1167-3.2007, Determinationoftheresistancetointernalpressure-Part 3.Preparationof Components;ISO 1167-4.2007,Thermoplasticspipes,fittingsandassemblies pressure-Part 4.Preparationofassemblies,NEQ) 2018-03-15 Release.2018-10-01 Implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Administration released Directory Preface I Introduction II 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Principle 2 5 Test parameters 2 6 Test Equipment 2 7 Sample 4 8 Calculation of test pressure 4 9 Test Instrument Calibration and Accuracy 5 10 Condition Adjustment 5 11 Test Step 6 12 Test Report 6 Appendix A (Normative) Preparation of Pipe Specimen 8 Appendix B (Normative) Preparation of Component Specimens 10 Appendix C (Normative Appendix) Preparation of Assembly Samples 17

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 6111-2003 "Test method for internal pressure resistance of thermoplastic pipes for fluid transfer" and GB/T 6111- Compared with.2003, the main technical changes are as follows. --- The scope has been expanded from "pipe" to "pipe, components and assemblies" (see Chapter 1); --- Added the following terms. component (3.1), standard size ratio (3.2), free length (3.3); --- The average temperature of the oven, modified from 3-1 °C to 2-1 °C (6.2); --- Added "size measuring device" requirement (6.8), deleted "thickness gauge" and "pipe average outer diameter ruler"; --- Increased and modified sample types and related requirements (see Chapter 7); --- Increased the calculation method of test pressure. According to the nominal size of the sample and the pressure calculation method according to SDR (8.3, 8.4); --- Increased the "test has been carried out for 500h ~ 1000h" when the treatment method (11.3); ---In the test report, "f) "Sample preparation conditions" and "l) Condition adjustment time" are added (see Chapter 12); --- Deleted the original standard data Appendix A; --- Increased the normative appendix A, appendix B, appendix C, respectively, the pipe, assembly, assembly sample preparation requirements. This standard uses redrafted reference ISO 1167-1.2006 "Thermoplastic Pipes, Components and Assemblies for Fluid Conveyance Determination of Pressure Properties - Part 1. General Test Methods, ISO 1167-2.2006, Thermoplastic Pipes, Components and Combinations for Fluid Delivery Determination of internal pressure resistance of parts - Part 2. Preparation of pipe samples", ISO 1167-3.2007, Thermoplastics pipes for fluid transport, Determination of internal pressure resistance of components and assemblies - Part 3. Preparation of component specimens", ISO 1167-4.2007 "Thermoplastics for fluid transport Determination of resistance to internal pressure properties of plastic pipes, assemblies and assemblies - Part 4. Preparation of assembly specimens", prepared with ISO 1167. The consistency of.2006/2007 is not equivalent. Please note that some of the contents of this document may involve patents. The issuing agency of this document does not assume responsibility for identifying these patents. This standard is proposed by China Light Industry Federation. This standard is under the jurisdiction of the National Plastic Products Standardization Technical Committee (SAC/TC48). Drafters of this standard. Yonggao Co., Ltd., National Plastic Products Quality Supervision and Inspection Center (Fuzhou), Wuhan Jinniu Economy Development Co., Ltd., Chengde Precision Testing Machine Co., Ltd., Chengde Jinjian Testing Instrument Co., Ltd., Xiamen Sandeng Plastic Industrial Co., Ltd. Secretary, Hebei Baoshuo Pipe Co., Ltd. The main drafters of this standard are. Huang Jian, Lin Wei, Liu Feng, Wang Xinhua, Ren Yufeng, Sun Huali, Yan Xusheng, and Wang Zhibin. The previous versions of the standard replaced by this standard are. --- GB/T 6111-1985, GB/T 6111-2003.

Introduction

This standard will be ISO 1167-1.2006 "Determination of internal pressure resistance of thermoplastic pipes, components and assemblies for fluid transport. Part 1. General test methods, ISO 1167-2.2006, "Insulation resistance of thermoplastic pipes, components and assemblies for fluid transport Determination of Part 2. Preparation of Pipe Specimen, ISO 1167-3.2007, Thermoplastic Pipes, Components and Assemblies for Fluid Delivery Determination of internal pressure properties - Part 3. Preparation of component specimens", ISO 1167-4.2007, Thermoplastics pipes, components for fluid transport, and Measurement of the inner pressure resistance of the assembly Part 4. Preparation of the assembly test piece. The four parts were combined into one text, redrafted, packaged Including editorial changes, the main technical differences between this standard and ISO 1167 are as follows. --- Consolidation of the four parts of ISO 1167 into one text, technical content of ISO 1167-2, ISO 1167-3, ISO 1167-4 Do not use this standard normative appendix A, appendix B, appendix C; --- Normative references have been replaced or increased or decreased using domestically relevant similar standards; In the text, where there are national standards that correspond to international standards, national standards are used instead of directly adopting international standards; --- Increased the normative reference document GB/T 19278-2003; --- Uniformly modify the pressure unit involved in the standard to China's statutory unit MPa "MPa"; --- Modify Figure 1, and mark the free length in the figure; --- The formulas were numbered to comply with the relevant provisions for the drafting of China's national standards; --- Added "Type A type sealing joint when performing arbitration test"; --- Added "pipe arbitration test using measuring dimensions to calculate test pressure"; --- Modify the "minimum state adjustment time" requirement to "state adjustment time" and give the deviation. Thermoplastic pipe system for fluid delivery Resistance to internal pressure

1 Scope

This standard specifies tests for determining the resistance to internal pressure of thermoplastic pipes, components and assemblies for fluid delivery at a given temperature. method. This standard applies to water inside the sample, external water (water - water test), air (water - air test) and other liquids (water - other liquids Test) internal pressure resistance test.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article Pieces. For undated references, the latest version (including all amendments) applies to this document. GB/T 4217 Nominal outside diameter and nominal pressure of thermoplastic pipe for fluid transport (GB/T 4217-2008, ISO 161-1. 1996, IDT) GB/T 8806 Determination of the dimensions of plastic components for plastic pipe systems (GB/T 8806-2008, ISO 3126.2005, IDT) GB/T 18252 Plastics piping systems for extrapolation to determine the long-term hydrostatic strength of thermoplastics in the form of pipes (GB/T 18252-2008, ISO 9080.2003, IDT) GB/T 18475 Thermoplastics for Pressure Pipes and Fittings Graded and Named Overall Use (Design) Factor (GB/T 18475-2001, eqvISO 12162.1995) GB/T 19278-2003 General Terms and Definitions for Thermoplastic Pipes, Fittings and Valves GB/T 19807 Preparation of plastic pipe and fittings for combination of polyethylene pipe and fused pipe fittings (GB/T 19807-2005, ISO 11413..1996, MOD) GB/T 19809 Plastic pipes and fittings Polyethylene (PE) pipes/pipes or pipes/pipes Hot-melt butt joint assemblies (GB/T 19809-2005, ISO 11414.1996, IDT) QB/T 2568 solvent-based adhesive for PVC-U plastic pipe systems (QB/T 2568-2002, ASTM D 2564-1996a, MOD)

3 Terms and definitions

The terms and definitions defined in GB/T 19278-2003 and the following apply to this document. 3.1 Component component A single or combined pipe or valve as a unitary unit. 3.2 Standard size ratio standarddimensionratio SDR The ratio of the nominal outside diameter dn of the pipe to the nominal wall thickness en. [GB/T 19278-2003, definition 6.7]

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 6111-2018_English be delivered?

Answer: Upon your order, we will start to translate GB/T 6111-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 6111-2018_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 6111-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 6111-2018?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6111-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.