HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 6109.7-2008 English PDF

US$194.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 6109.7-2008: Enamelled round winding wire -- Part 7: Polyester enamelled round copper wire, class 130L
Status: Valid

GB/T 6109.7: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 6109.7-2008English194 Add to Cart 3 days [Need to translate] Enamelled round winding wire -- Part 7: Polyester enamelled round copper wire, class 130L Valid GB/T 6109.7-2008
GB/T 6109.7-1990English279 Add to Cart 3 days [Need to translate] Enamelled round winding wires--Part 7: Polyester enamelled round copper wires, class 130 Obsolete GB/T 6109.7-1990

PDF similar to GB/T 6109.7-2008


Standard similar to GB/T 6109.7-2008

GB/T 4074.21   GB/T 4074.3   GB/T 6109.5   GB/T 6109.1   GB/T 6109.12   GB/T 6109.11   

Basic data

Standard ID GB/T 6109.7-2008 (GB/T6109.7-2008)
Description (Translated English) Enamelled round winding wire -- Part 7: Polyester enamelled round copper wire, class 130L
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard K12
Classification of International Standard 29.060.01
Word Count Estimation 10,199
Date of Issue 2008-04-23
Date of Implementation 2008-12-01
Older Standard (superseded by this standard) GB/T 6109.7-1990
Quoted Standard GB/T 6109.1-2008
Adopted Standard IEC 60317-34-1997, IDT
Regulation (derived from) Announcement of Newly Approved National Standards No. 6 of 2008 (total 119)
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the polyester resin-based paint 130L single enamelled round copper wire may require. If you can retain the original resin and meets the chemical properties of all the requirements of the enameled wire, the resin can be modified. 130L level of the heat stage, which requires a minimum temperature index of 130, a heat shock temperature of at least 155��C. Corresponds to the temperature in Celsius temperature index is not recommended use temperature enameled wire, because it depends on factors including the type of equipment, including a lot of factors.

GB/T 6109.7-2008: Enamelled round winding wire -- Part 7: Polyester enamelled round copper wire, class 130L


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Enamelled round winding wire Part 7. Polyester enamelled round copper wire, class 130L ICS 29.060.01 K12 National Standards of People's Republic of China GB/T 6109.7-2008/IEC 60317-34.1997 Replacing GB/T 6109.7-1990 Enamelled round winding wires Part 7. 130L grade polyester enamelled round copper wire (IEC 60317-34.1997, Specificationsforparticulartypesofwinding wires-Part 34. Polyesterenameledroundcopperwire, class130L, IDT) Posted 2008-04-23 2008-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Definitions, test methods and appearance General 1 Size 4 1 5 Resistance 1 Elongation 1 6 2 7 resilience 8 flexibility and adhesion 2 9 Thermal Shock 2 10 Softening 2 11 scratch (conductor nominal diameter 0.250mm and 2.500mm above and below) 2 12 Solvent 3 13 Breakdown Voltage 3 14 film continuity 3 15 Temperature index 3 16 anti-freezing agent 3 17 solderable 3 18 thermal bonding 3 19 3 dielectric loss factor 20 transformer oil resistant 4 21 4 Loss 23 pinhole test 4 30 Package 4 GB/T 6109.7-2008/IEC 60317-34.1997

Foreword

GB/T 6109 "enamelled round winding wires" is divided into 22 parts. --- Part 1. General requirements; --- Part 2. 155 polyester enamelled round copper wire; --- Part 3. 120 acetal enamelled round copper wire; --- Part 4. 130 solderable polyurethane enamelled round copper wire; --- Part 5. 180 polyester enamelled round copper wire; --- Part 6. 220 Polyimide enamelled round copper wire; Part --- Article 7. 130L grade polyester enamelled round copper wire; --- Part 9. 130 polyamide composite solderable polyurethane enamelled round copper wire; --- Part 10. 155 solderable polyurethane enamelled round copper wire; --- Part 11. 155 polyamide composite solderable polyurethane enamelled round copper wire; --- Part 12. 180 polyester or polyamide, polyester enamelled round copper wire; --- Part 13. 180 solderable polyester-imide enamelled round copper wire; --- Part 14. Polyamide-imide 200 enamelled round copper wire; --- Part 15. 130 self-adhesive straight welding polyurethane enamelled round copper wire; --- Part 16. 155 self-adhesive straight welding polyurethane enamelled round copper wire; --- Part 17. 180 self-adhesive Solderable polyesterimide enamelled round copper wire; --- Part 18. 180 self-adhesive polyester enamelled round copper wire; --- Part 19.200 self-adhesive polyester or polyester-polyamide-imide enamelled round copper wire; --- Part 20.200 polyester or polyester-polyamide imide enamelled round copper wire; --- Part 21.200 Polyester - amide - imide enamelled round copper wire; --- Part 22. 240 aromatic polyimide enamelled round copper wire; --- Part 23. 180 straight welding polyurethane enamelled round copper wire. This is Part 7 GB/T 6109's. This section identical with IEC 60317-34.1997 "winding wires Product Standards Part 34. 130L grade polyester enamelled round copper wire, "2nd edition (in English). For ease of use, this section made the following editorial changes. --- Deleted international standards foreword; "." --- With a decimal point instead of a comma as the decimal point, ""; --- According to IEC 60317-0-1.2005 increases the pinhole pilot projects; --- Complements IEC original text missing Table 2 two specification data. Since the implementation of this section instead of GB/T 6109.7-1990. Section compared with the GB/T 6109.7-1990, major changes in the following. --- 130L grade polyester enamelled round copper wire with 130 polyester enamelled round copper wire all the structural dimensions and performance indicators in addition to thermal shock They are the same. Wherein the thermal shock temperatures are 155 ℃, but the winding times the diameter enlarged. Therefore, IEC 60317-34.1997 The 130L grade n Good equivalent to GB/T 6109.7-1990 of 130. The revision according to the doctrine of equivalents clear thermal class 130L grade; --- Conductor nominal diameter range increased from 0.018mm ~ 3.150mm (1 level) and 0.018mm ~ 5.000mm (Level 2) points Do not adjust 0.050mm ~ 3.150mm and 0.050mm ~ 5.000mm (level 2), canceled the fine specifications; --- Used to calculate the number of revolutions of the peeling test using a constant K changed from 150mm 130mm; GB/T 6109.7-2008/IEC 60317-34.1997 --- Increasing the pinhole pilot projects. This part is proposed by the China Electrical Equipment Industrial Association. This part of the National Standardization Technical Committee Wire and Cable (SAC/TC213) centralized. This part of the unit responsible for drafting. Shanghai Electric Cable Research Institute. Participated in the drafting of this section. Zhongshan Prudential Co. enameled wood, Lee St. Suzhou Cable Co., Ltd., Wuxi tin Chau Wire Factory, Bo Cable Co., Ltd. Jufeng composite wires, Zhejiang Great Wall Electronic Technology Group. The main drafters of this section. Lei Jie Yan, Wu Xueliang, marching Xu, Cao Hengtai, Cai Lin, Yao Guihua, Chen Hui-min. This part of the standard replaces the previous editions are. --- GB/T 6109.7-1990. GB/T 6109.7-2008/IEC 60317-34.1997 Enamelled round winding wires Part 7. 130L grade polyester enamelled round copper wire

1 Scope

GB/T 6109 This section provides a single polyester resin-based paint in the 130L grade enameled copper wire requirements. If you can keep Chemical properties of the original resin and meet all the requirements specified in the wire, the resin may be modified. NOTE. chemically-modified resin is a variation of, or contain one or more additives to improve certain properties of the resin or its usage characteristics. 130L grade represents the thermal level, which requires a minimum temperature index of 130, a heat shock temperature of at least 155 ℃. Note. The thermal shock performance under this Part of 130L grade enamelled copper wire than required by IEC 60317-45 130 enamelled round copper wire low. Corresponding to the temperature index temperature in Celsius is not recommended wire temperature, because it depends on the type of equipment used include Many factors within. Conductor nominal diameter range specified in this standard are. --- Level 1. 0.050mm and 3.150mm above and below; --- Level 2. 0.050mm and 5.000mm above and below. Nominal press GB/T 6109.1-2008 prescribed in Chapter 4, the diameter of the conductor.

2 Normative references

The following documents contain provisions which, through reference to GB/T 6109 to the present, constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. Part 1 GB/T 6109.1-2008 enamelled round winding wire. General requirements (IEC 60317-0-1.2005, IDT) 3 Definitions, test methods and General Appearance 3.1 Definitions, test methods - General Definitions, test methods, see General provisions GB/T 6109.1-2008 in Chapter 3. If GB/T 6109.1-2008 in this section are contradictory to this section shall prevail. 3.2 Appearance See GB/T 6109.1-2008 in 3.3.

4 Dimensions

See GB/T 6109.1-2008 in Chapter 4.

5 resistance

See GB/T 6109.1-2008 in Chapter 5.

6 Elongation

See GB/T 6109.1-2008 in Chapter 6. GB/T 6109.7-2008/IEC 60317-34.1997

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 6109.7-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 6109.7-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 6109.7-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 6109.7-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 6109.7-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6109.7-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.