|
US$174.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 6109.11-2008: Enamelled round winding wire -- Part 11: Solderable polyurethane enamelled round copper wire overcoated with polymide, class 155
Status: Valid GB/T 6109.11: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 6109.11-2008 | English | 174 |
Add to Cart
|
3 days [Need to translate]
|
Enamelled round winding wire -- Part 11: Solderable polyurethane enamelled round copper wire overcoated with polymide, class 155
| Valid |
GB/T 6109.11-2008
|
| GB/T 6109.11-1990 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Enamelled round winding wires--Part 11: Polyester (imide) enamelled round copper wires overcoated with polyamide-imide, class 200
| Obsolete |
GB/T 6109.11-1990
|
PDF Samples
Basic data | Standard ID | GB/T 6109.11-2008 (GB/T6109.11-2008) | | Description (Translated English) | Enamelled round winding wire -- Part 11: Solderable polyurethane enamelled round copper wire overcoated with polymide, class 155 | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K12 | | Classification of International Standard | 29.060.01 | | Word Count Estimation | 9,911 | | Date of Issue | 2008-04-23 | | Date of Implementation | 2008-12-01 | | Quoted Standard | GB/T 6109.1-2008 | | Adopted Standard | IEC 60317-21-2000, IDT | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 6 of 2008 (total 119) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the pair paint the 155 straight welding enamelled round copper wire requirements. Polyurethane -based primer layer, if they can retain the original chemical properties of the resin and meets all requirements of the enameled wire, the resin can be modified. Topcoat layer is made of a polyamide resin as base. 155 of the heat stage, which requires a minimum temperature index of 155, a heat shock temperature of at least 175��C. Corresponds to the temperature in Celsius temperature index is not recommended use temperature enameled wire, because it depends on factors including the type of equipment, including a lot of factors. This section provides a nominal conductor diameter range: 1: 0. 050 mm and less than 1. 600 mm, 2 | GB/T 6109.11-2008 ImageGB/T 6109.11-2008: Enamelled round winding wire -- Part 11: Solderable polyurethane enamelled round copper wire overcoated with polymide, class 155
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Enamelled round winding wire Part 11. Solderable polyurethane enamelled round copper wire overcoated with polymide, class 155
ICS 29.060.01
K12
National Standards of People's Republic of China
GB/T 6109.11-2008/IEC 60317-21.2000
Enamelled round winding wires
Part 11. 155 polyamide composite
Solderable polyurethane enamelled round copper wire
(IEC 60317-21.2000, Specificationsforparticulartypesofwindingwires-
Part 21. Solderablepolyurethaneenameledroundcopperwire
overcoatedwithpolyamide, class155, IDT)
Posted 2008-12-01 2008-04-23 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Definitions, test methods and appearance General 1
Size 4 1
5 Resistance 1
Elongation 1 6
2 7 resilience
8 flexibility and adhesion 2
9 Thermal Shock 2
10 Softening 2
11 scratch (conductor nominal diameter 0.250mm and 1.600mm above and below) 2
12 Solvent 2
13 Breakdown Voltage 2
14 film continuity 4
15 4 Temperature Index
16 anti-freezing agent 4
17 solderable 4
18 thermal bonding 4
19 4 dielectric loss factor
20 transformer oil resistant 4
21 4 Loss
23 pinhole test 4
30 Package 4
GB/T 6109.11-2008/IEC 60317-21.2000
Foreword
GB/T 6109 "enamelled round winding wires" is divided into 22 parts.
--- Part 1. General requirements;
--- Part 2. 155 polyester enamelled round copper wire;
--- Part 3. 120 acetal enamelled round copper wire;
--- Part 4. 130 solderable polyurethane enamelled round copper wire;
--- Part 5. 180 polyester enamelled round copper wire;
--- Part 6. 220 Polyimide enamelled round copper wire;
Part --- Article 7. 130L grade polyester enamelled round copper wire;
--- Part 9. 130 polyamide composite solderable polyurethane enamelled round copper wire;
--- Part 10. 155 solderable polyurethane enamelled round copper wire;
--- Part 11. 155 polyamide composite solderable polyurethane enamelled round copper wire;
--- Part 12. 180 polyester or polyamide, polyester enamelled round copper wire;
--- Part 13. 180 solderable polyester-imide enamelled round copper wire;
--- Part 14. Polyamide-imide 200 enamelled round copper wire;
--- Part 15. 130 self-adhesive straight welding polyurethane enamelled round copper wire;
--- Part 16. 155 self-adhesive straight welding polyurethane enamelled round copper wire;
--- Part 17. 180 self-adhesive Solderable polyesterimide enamelled round copper wire;
--- Part 18. 180 self-adhesive polyester enamelled round copper wire;
--- Part 19.200 self-adhesive polyester or polyester-polyamide-imide enamelled round copper wire;
--- Part 20.200 polyester or polyester-polyamide imide enamelled round copper wire;
--- Part 21.200 Polyester - amide - imide enamelled round copper wire;
--- Part 22. 240 aromatic polyimide enamelled round copper wire;
--- Part 23. 180 straight welding polyurethane enamelled round copper wire.
This is Part 11 GB/T 6109's. This section identical with IEC 60317-21.2000 "winding wires Product Standards
Part 21. 155 polyamide composite solderable polyurethane enamelled round copper wire, "Version 2.2 (in English).
For ease of use, this section made the following editorial changes.
--- Deleted international standards foreword;
"." --- With a decimal point instead of a comma as the decimal point, "";
--- According to IEC 60317-0-1.2005 increases the pinhole pilot projects.
This is the first part of the formulation.
This part is proposed by the China Electrical Equipment Industrial Association.
This part of the National Standardization Technical Committee Wire and Cable (SAC/TC213) centralized.
This part of the unit responsible for drafting. Shanghai Electric Cable Research Institute.
Participated in the drafting of this section. Shandong Dorset electrician Material Co., Ltd., Chengdu Guoguang Electric Co., Ltd., Suzhou Shengli have cable
Limited, Yusheng Special Wire Co., Ltd., Zhejiang Great Wall Electronic Technology Group, Zhongshan Prudential Co. enameled wood.
The main drafters of this section. and army, Huqing Festival, Luo Liren, Zhang technology, Yao Guihua, Yan Lei Jie, Chen Hui-min.
GB/T 6109.11-2008/IEC 60317-21.2000
Enamelled round winding wires
Part 11. 155 polyamide composite
Solderable polyurethane enamelled round copper wire
1 Scope
GB/T 6109 This section provides the 155 paint double solderable enamelled round copper wire requirements. The primer layer is a polyurethane-based resin,
If the resin can retain the chemical characteristics of the original and meet all the requirements specified in the wire, the resin may be modified. Topcoat layer is poly
An amide-based resin.
NOTE. chemically-modified resin is a variation of, or contain one or more additives to improve certain properties of the resin or its usage characteristics.
155 represents the thermal level, which requires a minimum temperature index of 155, a heat shock temperature of at least 175 ℃.
Corresponding to the temperature index temperature in Celsius is not recommended wire temperature, because it depends on the type of equipment used include
Many factors within.
Conductor nominal diameter range specified in this standard are.
--- Level 1. 0.050mm and 1.600mm above and below;
--- Level 2. 0.050mm and 1.600mm above and below.
Nominal press GB/T 6109.1-2008 prescribed in Chapter 4, the diameter of the conductor.
2 Normative references
The following documents contain provisions which, through reference to GB/T 6109 to the present, constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
Part 1 GB/T 6109.1-2008 enamelled round winding wire. General requirements (IEC 60317-0-1.2005, IDT)
3 Definitions, test methods and General Appearance
3.1 Definitions, test methods - General
Definitions, test methods, see General GB/T 6109.1-2008 Chapter 3.
If GB/T 6109.1-2008 in this section are contradictory to this section shall prevail.
3.2 Appearance
See GB/T 6109.1-2008 in 3.3.
4 Dimensions
See GB/T 6109.1-2008 in Chapter 4.
5 resistance
See GB/T 6109.1-2008 in Chapter 5.
6 Elongation
See GB/T 6109.1-2008 in Chapter 6.
GB/T 6109.11-2008/IEC 60317-21.2000
......
|