|
US$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 6005-2008: Test sieves -- Metal wire cloth, perforated metal plate and electroformed sheet -- Nominal sizes of openings
Status: Valid GB/T 6005: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 6005-2008 | English | 229 |
Add to Cart
|
3 days [Need to translate]
|
Test sieves -- Metal wire cloth, perforated metal plate and electroformed sheet -- Nominal sizes of openings
| Valid |
GB/T 6005-2008
|
| GB/T 6005-1997 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Test sieves--Metal wire cloth, perforated metal plate and electroformed sheet--Nominal sizes of opening
| Obsolete |
GB/T 6005-1997
|
| GB/T 6005-1985 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Test sieves--Woven metal wire cloth, perforated plate and electroformed sheet--Nominal sizes of openings
| Obsolete |
GB/T 6005-1985
|
PDF similar to GB/T 6005-2008
Standard similar to GB/T 6005-2008 GB/T 6003.2 GB/T 6003.1 GB/T 21649.2 Basic data | Standard ID | GB/T 6005-2008 (GB/T6005-2008) | | Description (Translated English) | Test sieves -- Metal wire cloth, perforated metal plate and electroformed sheet -- Nominal sizes of openings | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | A28 | | Classification of International Standard | 19.120 | | Word Count Estimation | 10,153 | | Date of Issue | 2008-07-18 | | Date of Implementation | 2009-02-01 | | Older Standard (superseded by this standard) | GB/T 6005-1997 | | Adopted Standard | ISO 565-1990, MOD | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 12 of 2008 (No. 125 overall) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the media as a test sieve wire cloth, perforated metal plate and electroformed sheet Nominal sizes. This standard applies to woven wire mesh, perforated metal plate and electroformed sheet. This standard wire braid and electroformed sheet Nominal sizes of less than or equal to 32��m, and are used as the primary dimension series R'10 series. Given the size of less than 32��m spacing between adjacent basic size is small, therefore, the selection of basic size R'10 series were limitations. | GB/T 6005-2008: Test sieves -- Metal wire cloth, perforated metal plate and electroformed sheet -- Nominal sizes of openings
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test sieves. Metal wire cloth, perforated metal plate and electroformed sheet. Nominal sizes of openings
ICS 19.120
A28
National Standards of People's Republic of China
Replacing GB/T 6005-1997
Test sieves - Metal wire cloth, perforated plate and
Electroformed sheet mesh basic dimensions
(ISO 565.1990, MOD)
Posted 2008-07-18
2009-02-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This revised standard adopts ISO 565. "basic dimensions Test sieves - Metal wire cloth, perforated plate and electroformed sheet mesh" 1990
(In English).
This standard and ISO 565.1990 compared to the main changes are as follows.
--- Modify the scope;
--- The "this International Standard" by "this standard";
"." --- With a decimal point instead of a comma as the decimal point, "";
--- Delete international standards preface, introduction;
--- Expressed to apply to the contents of the standard formulation;
--- Deleted Appendix A;
--- Added Appendix A "woven wire mesh test parameter table."
This standard replaces GB/T 6005-1997 "Test sieves - Metal wire cloth, perforated plate and electroformed sheet mesh basic dimensions."
This standard and GB/T 6005-1997 compared to the main changes are as follows.
--- Modify the scope;
--- Increasing the normative references;
--- Added Appendix A "woven wire mesh test parameter table";
--- Modify the terms and definitions.
Appendix A of this standard is an informative annex.
This standard by the national and sorting method Standardization Technical Committee particles sieved (SAC/TC168) and focal points.
This standard was drafted. the machine Productivity Promotion Center, Xinxiang Bashan sophisticated filters Limited.
The main drafters of this standard. Yu Fang, Liu Heqing.
This standard replaces the standards previously issued as follows.
--- GB 6005-1985, GB/T 6005-1997.
Test sieves - Metal wire cloth, perforated plate and
Electroformed sheet mesh basic dimensions
1 Scope
This standard specifies the basic dimensions as a test sieve medium metal wire cloth, perforated plate and electroformed sheet of mesh.
This standard applies to woven wire mesh, perforated plate and electroformed sheet.
The basic dimensions of this standard woven wire cloth and electroformed sheet of mesh, less than or equal to 32μm, and are used R'10 series
As a major dimension series.
Given the small size of less than spacing between adjacent basic size of 32μm, therefore, the basic dimensions of the series R'10 choice made
limit.
The ratio between the size of the adjacent series are shown in Table 1.
Table 1
The percentage ratio of the difference between the series
R20/3 1.40 40%
R'10 about 25% 1.25
R40/3 about 19% 1.19
R20 about 12% 1.12
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 5329 Test sieves and screening tests terminology (GB/T 5329-2003, ISO 2395.1990, MOD)
3 Terms and Definitions
GB/T 5329 identified in the terms and definitions apply to this standard.
4 Mark
Basic test mesh sieve size 4.1 (on the center side of the pitch or diameter) to represent. For the perforated plate and electroformed sheet, it should be noted hole
Type. square or round holes.
4.2 mesh size greater than or equal to 1mm, and in mm; mesh size of less than 1mm, represented by μm.
The basic dimensions of the mesh 5
The basic mesh size in Table 2 and Table 3. Recommended main dimensions selected series. But as the need for a series of small gradient mesh size shall
Choose from a series of R20 or R40/3 series in two complementary dimensions, while not allowed to choose from both.
5.1 For woven wire mesh. from 125mm to 20μm.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 6005-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 6005-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 6005-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 6005-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 6005-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6005-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|