|
US$139.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 5651-2008: Flared couplings -- Seat insert
Status: Valid GB/T 5651: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 5651-2008 | English | 139 |
Add to Cart
|
3 days [Need to translate]
|
Flared couplings -- Seat insert
| Valid |
GB/T 5651-2008
|
| GB/T 5651-1985 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Flared type tube fittings--Seat insert
| Obsolete |
GB/T 5651-1985
|
PDF similar to GB/T 5651-2008
Basic data | Standard ID | GB/T 5651-2008 (GB/T5651-2008) | | Description (Translated English) | Flared couplings -- Seat insert | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J15 | | Classification of International Standard | 21.060.60 | | Word Count Estimation | 6,622 | | Date of Issue | 2008-05-07 | | Date of Implementation | 2008-11-01 | | Older Standard (superseded by this standard) | GB/T 5651-1985 | | Quoted Standard | GB/T 5653-2008 | | Regulation (derived from) | National Standard Approval Announcement 2008 No.7 (Total No.120) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the flare tube fittings gasket dimensions, marking and technical requirements. This standard applies to pipe diameter of 4 mm to 18 mm, the maximum working pressure of the hydraulic fluid transmission 3. 5MPa ~ 16MPa and general -purpose pipeline system. | GB/T 5651-2008: Flared couplings -- Seat insert---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Flared couplings. Seat insert
ICS 21.060.60
J15
National Standards of People's Republic of China
Replacing GB/T 5651-1985
Flared type tube fittings gasket
Posted 2008-05-07
2008-11-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard is one flared fittings series.
This standard is GB/T 5651-1985 "flared fittings gasket," the amendment. The main amendments are.
--- Modified Chinese and English name;
--- Reducing the parameters should be part of the manufacturer's control;
--- Tolerance on the part of prevailing standards of tolerance and fit adjustment;
--- Cancel the marked surface roughness, surface roughness is given in GB/T 5653 "flared fittings technical conditions" in.
Since the implementation of this standard replaces GB/T 5651-1985.
The standard proposed by China Machinery Industry Federation.
This standard by the National Standardization Technical Committee pipe accessories.
This standard is drafted by. Productivity Promotion Center in the machine.
Participated in the drafting of this standard. Haiyan Pipe Manufacturing Co., Eaton (Ningbo) fluid connector Ltd., Jiaxing Mai Site fittings
Manufacturing Co., Ltd., Jianhu particularly good hydraulic pipe fittings Co., high-Bo Haiyan Pipe Co., Ltd., Haiyan tube Manufacturing Co.,
Hydraulic annex Ltd. Jiaozuo City lead.
The main drafters of this standard. Li Weirong, Gengzhi school, Zhou Shunhua, Li Junying, Tao Zhongming, Zuo Jun, Ruanhao Feng, Zhou Jianfei, Wang Limin,
Feng Feng.
This standard replaces the standards previously issued as follows.
--- GB/T 5651-1985.
Flared type tube fittings gasket
1 Scope
This standard specifies the flare tube fittings gasket dimensions, marking and technical requirements.
This standard applies to pipe outside diameter 4mm ~ 18mm, the maximum working pressure of the hydraulic fluid and transmission of a 3.5MPa ~ 16MPa
General purpose piping system.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 5653-2008 flared tube fittings
3 Dimensions
Flared type tube fittings gasket dimensions shall comply with the provisions of Figure 1 and Table 1.
4 Mark
4.1 labeling method
Flared type tube fittings labeling methods gasket should be consistent with the provisions of GB/T 5653's.
4.2 tag example
Tube outer diameter of 10mm, not surface-treated steel flared tube fittings Type A gasket marked.
Gasket GB/T 5651 A10
5 Technical requirements
Technical requirements according to GB/T 5653 regulations.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 5651-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 5651-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 5651-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 5651-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 5651-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5651-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|