HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (12 Oct 2025)

GB/T 5359.3-2008 English PDF

US$529.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 5359.3-2008: Term for motorcycles and mopeds -- Part 3: Dimensions of vehicle with two and three wheels
Status: Valid

GB/T 5359.3: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 5359.3-2008English529 Add to Cart 4 days [Need to translate] Term for motorcycles and mopeds -- Part 3: Dimensions of vehicle with two and three wheels Valid GB/T 5359.3-2008
GB/T 5359.3-1996English359 Add to Cart 3 days [Need to translate] Term for motorcycles and mopeds--Dimensions of vehicle with two wheels Obsolete GB/T 5359.3-1996
GB 5359.3-1985English199 Add to Cart 2 days [Need to translate] Terms and definitions for motorcycles--Masses of vehicles Obsolete GB 5359.3-1985

PDF similar to GB/T 5359.3-2008


Standard similar to GB/T 5359.3-2008

GB/T 5378   GB/T 5374   GB/T 5359.1   GB/T 5359.4   GB/T 5359.2   

Basic data

Standard ID GB/T 5359.3-2008 (GB/T5359.3-2008)
Description (Translated English) Term for motorcycles and mopeds -- Part 3: Dimensions of vehicle with two and three wheels
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard T80
Classification of International Standard 43.140
Word Count Estimation 23,292
Date of Issue 2008-11-28
Date of Implementation 2009-06-01
Older Standard (superseded by this standard) GB/T 5359.3-1996; GB/T 5359.7-1996
Quoted Standard GB/T 5359.1
Regulation (derived from) National Standard Approval Announcement 2008 No.19 (Total No.132)
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the size of motorcycles and mopeds with relevant general principles and terminology. This section applies to quasi- GB/T 5359. 1 defined motorcycles and mopeds (hereinafter referred to as the "vehicle").

GB/T 5359.3-2008: Term for motorcycles and mopeds -- Part 3: Dimensions of vehicle with two and three wheels


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Term for motorcycles and mopeds Part 3. Dimensions of vehicle with two and three wheels ICS 43.140 T80 National Standards of People's Republic of China Replacing GB/T 5359.3-1996, GB/T 5359.7-1996 Motorcycles and mopeds term Part 3. Dimensions wheelers and tricycles Posted 2008-11-28 2009-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 5359 "motorcycles and mopeds term" is divided into four parts. --- Part 1. type of vehicle; --- Part 2. vehicle performance; --- Part 3. Dimensions wheelers and three-wheelers; --- Part 4. two-wheelers and three-wheelers quality. This section GB/T 5359 Part 3. This Part replaces GB/T 5359.3-1996 "two-wheeled motorcycles and mopeds term dimension" and GB/T 5359.7-1996 "Motorcycles and mopeds term tricycle size." This portion of the GB/T 5359.3-1996, GB/T 5359.7-1996 compared to the main amendments are as follows. --- Chapter 3. b), "set the maximum total plant mass" with "vehicle dry mass"; --- Chapter 3. c), "tire filled with factory set to the maximum pressure corresponding to the total mass" with "vehicle tire inflation system and should meet Factory-made technical documents consistent pressure "; --- Section 3 g), "the inside of the rim flange equidistant plane" to "refers to the plane of symmetry of the inside edge of the rim two"; --- 5.9 by the term "through the corner rampangle" read "by the longitudinal corner lognitudinalrampangle"; --- 5.14 bankingangle by the term "dumping side diagonal" Translation by "side diagonal"; --- 5.15, the term "frame above the ground" to "ride height"; --- 5.16 The term "maximum available after the cab frame length" to "the maximum useful length of the rear chassis Cab"; --- Section 6.1 The term "residual vertical wheel clearance" to "vertical buffer margin"; --- Section 6.2 Turning circle diameter is defined in "on the support surface with the front wheel center plane tangent to the circle diameter" to "front (two-wheelers), outer Track-side wheel (tricycle) and the support surface contact points of the diameter of the circle ", to cover the tricycle. This part is proposed by the National Development and Reform Commission. This part of the National Automotive Standardization Technical Committee centralized. This section is drafted. Jincheng Group Co., Ltd., Shanghai Motor Vehicle Inspection Center. The main drafters of this section. Jiangjun Wang Wenjun Li, Hu Wenhao, Xu Jun. This part of the standard replaces the previous editions are. --- GB/T 5359.3-1996, GB/T 5359.7-1996; --- GB 4731-1984, GB 5359.2-1985. Motorcycles and mopeds term Part 3. Dimensions wheelers and tricycles

1 Scope

GB/T 5359 provisions of this part of the general principles and terminology of motorcycles and related to the size. This section applies to quasi GB/T 5359.1 defined motorcycles and mopeds (hereinafter referred to as "vehicle").

2 Normative references

The following documents contain provisions which, through reference to GB/T 5359 to the present, constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 5359.1 motorcycles and mopeds term vehicle type

3 General Principles

Unless otherwise specified, the default. a) a support surface of the vehicle is horizontal, length and width in the horizontal plane, the vertical height of the plane; b) the quality of the vehicle means the vehicle dry mass; c) tire inflation pressure should reach agreement with the technical documentation specified by the vehicle manufacturer; d) the vehicle is stationary, upright position. Engine is not running. The wheels of the vehicle straight-ahead position. Tricycle doors and windows closed; Note. This does not apply to 4.3.2,4.3.3. e) "vehicle" means the manufacturer according to standard assembly of new vehicles; Wheel f) of the vehicle resting on a support surface; g) "wheel center plane" means the plane of symmetry of the inside edge of the rim two; h) "wheel center" means the center of the wheel plane and the wheel rotating shaft centerline intersection.

4 Terms and Definitions

GB/T 5359.1 and established the following terms and definitions apply to this section. 4.1 The term relating to the reference plane 4.1.1 Coordinate plane for the three-dimensional orthogonal coordinate system X, Y, Z plane (see Figure 1). Wherein. Z --- horizontal (supporting surface); Y --- vertical plane; X --- plane perpendicular to both Y and Z.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 5359.3-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 5359.3-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 5359.3-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 5359.3-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 5359.3-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5359.3-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.