|
US$439.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 5330.1-2012: Industrial wire screens and woven wire cloth -- Guide to the choice of aperture size and wire diameter combinations -- Part 1: Generalities
Status: Valid GB/T 5330.1: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 5330.1-2012 | English | 439 |
Add to Cart
|
4 days [Need to translate]
|
Industrial wire screens and woven wire cloth -- Guide to the choice of aperture size and wire diameter combinations -- Part 1: Generalities
| Valid |
GB/T 5330.1-2012
|
| GB/T 5330-2003 | English | 979 |
Add to Cart
|
6 days [Need to translate]
|
Industrial woven metal wire cloth (square opening series)
| Valid |
GB/T 5330-2003
|
| GB/T 5330.1-2000 | English | 719 |
Add to Cart
|
5 days [Need to translate]
|
Selection Guide for General Principles of industrial metal mesh and metal wire cloth mesh size and wire diameter combinations
| Obsolete |
GB/T 5330.1-2000
|
| GB/T 5330-1985 | English | RFQ |
ASK
|
9 days [Need to translate]
|
Industrial woven metal wire cloth (square opening series)
| Obsolete |
GB/T 5330-1985
|
PDF similar to GB/T 5330.1-2012
Standard similar to GB/T 5330.1-2012 GB/T 6003.2 GB/T 6003.1 GB/T 21649.2 Basic data | Standard ID | GB/T 5330.1-2012 (GB/T5330.1-2012) | | Description (Translated English) | Industrial wire screens and woven wire cloth -- Guide to the choice of aperture size and wire diameter combinations -- Part 1: Generalities | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | A28 | | Classification of International Standard | 19.120 | | Word Count Estimation | 19,177 | | Older Standard (superseded by this standard) | GB/T 5330.1-2000 | | Quoted Standard | GB/T 5330; GB/T 10611; GB/T 13307; GB/T 19628.2; JB/T 7860 | | Adopted Standard | ISO 4783-1-1989, MOD | | Regulation (derived from) | National Standards Bulletin No. 24 of 2012 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the industrial wire screens and woven wire mesh size and wire diameter combinations. This section applies to industrial wire screens and woven wire cloth. | GB/T 5330.1-2012: Industrial wire screens and woven wire cloth -- Guide to the choice of aperture size and wire diameter combinations -- Part 1: Generalities
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS19.120
A28
National Standards of People's Republic of China
Replacing GB/T 5330.1-2000
Industrial wire screens and woven wire cloth
Mesh size and wire diameter combinations
Selection Guide - Part 1. General
aperturesizeandwirediametercombinations-Part 1. Generalities
(ISO 4783-1. 1989, MOD)
Issued on. 2013-03-01 2012-09-03 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 5330 "Industrial wire screens and woven wire mesh size and wire diameter combinations Selection Guide" is divided into three
section.
--- Part 1. General;
--- Part 2. industrial woven square hole wire mesh;
--- Part 3. pre-bending shaped metal wire woven square hole sieve.
This is Part 1 GB/T 5330's.
Rules in this section in accordance with GB/T 1.1-2009 given draft.
This Part replaces GB/T 5330.1-2000 "Industrial braided mesh size and diameter combinations of metal and wire mesh wire
Guide to the choice. "Compared with the GB/T 5330.1-2000, the main technical content unchanged.
This section uses redrafted Law Amendment uses ISO 4783-1. 1989 "Industrial wire screens and woven wire mesh size
And wire diameter combinations Selection Guide Part 1. General. "
This portion of the ISO 4783-1. 1989 technical differences exist, the terms of these differences have been involved in the blank position by its outer margin
. The single vertical line (|) were labeled as follows technical differences and their causes.
--- On normative references, this part has been adjusted technical differences, in order to adapt our technical conditions, the adjusted situation
Focus is reflected in the status of Chapter 2, "Normative references", the specific adjustments are as follows.
● GB/T 10611 industrial mesh labeling method and the mesh size series (ISO 2194.1991, MOD);
● GB/T 19628.2 industrial metal mesh and woven wire mesh size and wire diameter combinations - choose means
Priority south portfolio selection wire braid (ISO 4783-2. 1989, MOD);
--- Revised Chapter 5 pre-bent forming and bonding valued coefficients f wire deformation provision, easy to operate;
--- Revised Chapter 6 of the title and name of the chart;
--- Deleted the provisions of Chapter 5 Notes and Table 2.
For ease of use, this section also made the following editorial changes.
--- Added Appendix A.
This part of the characterization and sorting by the National Standardization Technical Committee and mesh particles (SAC/TC168) and focal points.
This section is drafted. the machine Productivity Promotion Center, Xinxiang Bashan Precision Filter Co., Ltd. Anping Anwar network hardware category Products
Limited.
The main drafters of this section. Yu Fang, Liu Heqing, Xu Lan will.
This part of the standard replaces the previous editions are.
--- GB/T 5330.1-2000.
Industrial wire screens and woven wire cloth
Mesh size and wire diameter combinations
Selection Guide - Part 1. General
1 Scope
This section GB/T 5330 provides for a combination of mesh size industrial wire screens and woven wire cloth and wire diameter.
This section applies to industrial wire screens and woven wire cloth.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 5330 industrial woven square hole wire mesh
GB/T 10611 industrial mesh labeling method and the mesh size range (GB/T 10611-2003, ISO 2194.1991, MOD)
GB/T 13307 pre-bent shaped woven wire square mesh
GB/T 19628.2 Selection Guide industrial metal wire mesh and woven wire mesh size and wire diameter combinations
Priority Portfolio Selection wire braid (GB/T 19628.2-2005, ISO 4783-2. 1989, MOD)
JB/T7860 Industrial wire
3 Mark
Industrial wire screens and woven wire cloth according to the following order mark (belong to the list item).
a) mesh size W;
b) wire diameter d;
c) wire material;
d) weaving pattern, see the provisions of GB/T 5330 and GB/T 13307 in.
4 combination of aperture size and wire diameter
Mesh size according to the provisions of GB/T 10611, and Table 1 shows the number of matches the wire diameter, its value according to JB/T7860's
Provisions and indicate the corresponding wire mesh sieve area percentage approximation screening area percentage according to equation (1) Calculation.
A0 = 100 ww
(1)
Where.
A0 --- screening area percentage,%;
W --- the mesh size, in millimeters (mm);
d --- wire diameter in millimeters (mm).
Note. Select from the specification in Table 1, can provide additional data, such as the mass per unit area, per unit length of mesh.
|