|
US$354.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 5267.3-2008: Fasteners -- Hot dip galvanized coatings
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 5267.3-2008 | English | 354 |
Add to Cart
|
3 days [Need to translate]
|
Fasteners -- Hot dip galvanized coatings
| Valid |
GB/T 5267.3-2008
|
PDF similar to GB/T 5267.3-2008
Basic data | Standard ID | GB/T 5267.3-2008 (GB/T5267.3-2008) | | Description (Translated English) | Fasteners -- Hot dip galvanized coatings | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J13 | | Classification of International Standard | 21.060.01; 25.220.40 | | Word Count Estimation | 18,187 | | Date of Issue | 2008-08-25 | | Date of Implementation | 2009-02-01 | | Adopted Standard | ISO 10684-2004, IDT | | Regulation (derived from) | National Standard Approval Announcement 2008 No.14 (Total No.127) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the M8 ~ M64 steel coarse threaded fasteners, material screws and studs, as well as performance levels to 12 nuts, hot dip galvanized layer, , performance levels to 10. 9 bolts craft, dimensions and certain characteristics. Specifications and for less than the M8 threaded fasteners (or) less than 1. 25mm pitch, it is not recommended to use hot-dip galvanizing. | GB/T 5267.3-2008: Fasteners -- Hot dip galvanized coatings---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Fasteners. Hot dip galvanized coatings
ICS 21.060.01; 25.220.40
J13
National Standards of People's Republic of China
GB/T 5267.3-2008/ISO 10684.2004
Fasteners hot dip galvanized coatings
(ISO 10684.2004, IDT)
Posted 2008-08-25
2009-02-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This section is one of the national standard "fasteners Surface Treatment" series. The series includes.
--- GB/T 5267.1-2002 fasteners plating layer;
--- GB/T 5267.2-2002 fasteners non-electrolytic zinc coating sheet;
--- GB/T 5267.3-2008 Fasteners hot dip galvanized layer.
This part of GB/T 35267 Part of.
This part identical with ISO 10684.2004 "Hot dip galvanized fasteners layer" (in English), the main differences are as follows.
--- In the reference file, instead of using our standards with international standards (Chapter 2).
This part of the Annex A, Annex B and Annex E are normative appendixes, Appendix C, Appendix D and Appendix F is an informative annex.
This part is proposed by China Machinery Industry Federation.
This part of the National Standardization Technical Committee fasteners (SAC/TC85) centralized.
This section is responsible for drafting unit. Productivity Promotion Center in the machine.
Participated in the drafting of this section. Zhejiang Haili Group Co., Ltd. Ningbo Yinzhou meter's metal surface treatment plant, Gem Industries shares have
Ltd., Zhejiang Zeen standards Co. and Zhejiang high-strength fasteners plant.
This part of the National Standardization Technical Committee Secretariat responsible for the interpretation of fasteners.
This section is the first issue.
GB/T 5267.3-2008/ISO 10684.2004
Fasteners hot dip galvanized coatings
1 Scope
This section provides M8 ~ M64 coarse thread steel fasteners, performance levels to 10.9 bolts, screws and studs, as well as performance
Thermal class to 12 nuts soaked materials, processes, dimensions and certain characteristics of the zinc coating. M8 less than the specifications and (or) less than the pitch
1.25mm threaded fastener is not recommended for hot-dip galvanized.
Note. Appendix A predetermined oversize tapped nuts M8 and M10 proof load stress and assurance, as well as M8 and M10 standard threaded screw
Bolt, screw and guaranteed minimum tensile load load, compared with the value of GB/T 3098.2 and GB/T 3098.1 prescribed, were decreased.
This part is mainly used in hot-dip galvanized steel threaded fasteners, but also applicable to other steel threaded parts.
Technical conditions given in this section also applies to non-threaded steel parts, such as washers.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this part. For dated references, subsequent
andtestmethods, MOD)
GB/T 22028 hot dip galvanized zinc coating to accommodate the inner thread (GB/T 22028-2008, ISO 965-5 threads.1998,
ISO generalpurposemetricscrewthreads-Tolerances-Part 5. Limitsofsizesforinternalscrew
threadstomatewithhot-dipgalvanizedexternalscrewthreadswithmaximumsizeoftoleranceposi-
tionhbeforegalvanizing, MOD)
GB/T 22029 hot-dip galvanized external screw thread on the receiving zinc coating (GB/T 22029-2008, ISO 965-4.1998,
ISO generalpurposemetricscrewthreads-Tolerances-Part 4. Limitsofsizesforhot-dipgalvanized
GB/T 5267.3-2008/ISO 10684.2004
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 5267.3-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 5267.3-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 5267.3-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 5267.3-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|