HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 5169.14-2017 English PDF

US$344.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 5169.14-2017: Fire hazard testing for electric and electronic products -- Part 14: Test flames--1 kW nominal pre-mixed flame -- Apparatus, confirmatory test arrangement and guidance
Status: Valid

GB/T 5169.14: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 5169.14-2017English344 Add to Cart 3 days [Need to translate] Fire hazard testing for electric and electronic products -- Part 14: Test flames--1 kW nominal pre-mixed flame -- Apparatus, confirmatory test arrangement and guidance Valid GB/T 5169.14-2017
GB/T 5169.14-2007English759 Add to Cart 3 days [Need to translate] Fire hazard testing for electric and electronic products -- Part 14: Test flames. 1kW nominal pre-mixed flame -- Apparatus, confirmatory test arrangement Obsolete GB/T 5169.14-2007
GB/T 5169.14-2001English559 Add to Cart 3 days [Need to translate] Electric and electronic products -- Fire hazard testing method 1kW nominal pre-mixed test flame and guidance Obsolete GB/T 5169.14-2001

PDF similar to GB/T 5169.14-2017


Standard similar to GB/T 5169.14-2017

GB/T 5169.11   GB/T 5169.10   GB/T 5169.16   GB/T 5169.13   GB/T 5169.23   GB/T 5169.12   

Basic data

Standard ID GB/T 5169.14-2017 (GB/T5169.14-2017)
Description (Translated English) Fire hazard testing for electric and electronic products -- Part 14: Test flames--1 kW nominal pre-mixed flame -- Apparatus, confirmatory test arrangement and guidance
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard K04
Classification of International Standard 13.220.40
Word Count Estimation 18,140
Date of Issue 2017-12-29
Date of Implementation 2018-07-01
Older Standard (superseded by this standard) GB/T 5169.14-2007
Regulation (derived from) National Standards Bulletin 2017 No. 32
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 5169.14-2017: Fire hazard testing for electric and electronic products -- Part 14: Test flames--1 kW nominal pre-mixed flame -- Apparatus, confirmatory test arrangement and guidance


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Fire hazard testing for electric and electronic products - Part 14. Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement and guidance ICS 13.220.40 K04 National Standards of People's Republic of China Replacing GB/T 5169.14-2007 Fire hazard testing for electric and electronic products Part 14. Test flame 1kW nominal premixed flame Device, confirm the test methods and guidelines Part 14.Testflames-1kWnominalpre-mixedflame- Apparatus, confirmatory telesstarrangement and guidance (IEC 60695-11-2.2013, Firehazardtesting- Part 11-2.Testflames-1kWnominalpre-mixedflame- Apparatus, Constructor and Guidance, IDT) 2017-12-29 published.2018-07-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released Directory Preface Ⅰ Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 burner/ignition device 2 5 test flame generation 3 6 test flame confirmation 3 7 Recommended equipment for the use of test flame 4 Appendix A (Normative) Burner structure 5 Appendix B (informative) Example of test equipment 11 Reference 12

Foreword

GB/T 5169 "electric and electronic products fire hazard test" consists of the following components. --- Part 1. Ignition test terms; --- Part 2. Fire hazard assessment guidelines General; --- Part 5. Flame needle flame test test device, to confirm the test methods and guidelines; --- Part 9. Fire hazard assessment guidelines preselected test procedures General; --- Part 10. Glow/hot wire basic test methods glow wire devices and common test methods; --- Part 11. Basic test methods of glow/hot wire glow wire flammability test method (GWEPT); --- Part 12. Glow/hot wire basic test methods glow wire flammability index (GWFI) test methods; --- Part 13. Glow/hot wire basic test methods Glow wire ignition temperature (GWIT) test methods; --- Part 14. Test Flame 1kW nominal premixed flame device to confirm the test methods and guidelines; --- Part 15. Test flame 500W flame device and confirm the test method; --- Part 16. Test flame 50W horizontal and vertical flame test method; --- Part 17. Test flame 500W flame test method; --- Part 18. Toxicity of combustion streams General; --- Part 19. Non-normal thermal compression stress relief deformation test; --- Part 20. Summary and relevance of flame surface spread test methods; --- Part 21. Non-normal hot ball pressure test method; --- Part 22. Test flame 50W flame device and confirm the test method; --- Part 23. Test flame tubular polymeric materials 500W vertical flame test method; --- Part 24. Fire hazard assessment guidelines insulation liquid; --- Part 25. Smoke general rules; --- Part 26. Smoke fuze test method summary and relevance; --- Part 27. Smoke fuzzy small-scale static test methods Instrument Description; --- Part 28. small-scale static smoke smoke test method Materials; --- Part 29. General rule of heat release; --- Part 30. Heat release test method summary and relevance; --- Part 31. Flame surface spread General; --- Part 32. Heat release of heat-releasing insulating liquid; --- Part 33. Fire hazard assessment guidelines flammable General; --- Part 34. Fire hazard assessment guidelines flammable test methods summary and relevance; --- Part 35. Burning flow of corrosion hazards General; --- Part 36. Burning flow corrosion hazard summary and relevance of test methods; --- Part 38. Summary and relevance of methods for toxicity testing of combustion streams; --- Part 39. Burning flow toxicity test results of the use and description; --- Part 40. Burning flow toxic toxic effects assessment apparatus and test methods; --- Part 41. Burning flow toxicity toxic effects assessment results of the calculation and description; --- Part 42. Test flame confirmation test guidelines; --- Part 44. Fire hazard assessment guidelines Fire hazard assessment. This section GB/T 5169 Part 14. This section drafted in accordance with GB/T 1.1-2009 given rules. This Part replaces GB/T 5169.14-2007 "Fire hazard testing of electrical and electronic products Part 14. Test flame 1kW standard Called pre-mixed flame equipment, confirm the test methods and guidelines ", compared with GB/T 5169.14-2007 main technical changes are as follows. --- Modify the propane gas purity requirements, from "not less than 98%" to "not less than 95%" (see 4.1,.2007 version 4.1); --- Modify the assessment test to confirm the standard, the temperature of the copper from 100 ℃ ± 5 ℃ to 700 ℃ ± 3 ℃ the time required For "45s ± 5s" read "46s ± 6s" (see 4.1, 6.1 and 6.3,.2007 Editions 4.1 and 6.1); --- The "flowmeter" "pressure gauge" and "control valve" three test devices into a "flow control" device (see 4.2.2,.2007 Edition 4.2.2, 4.2.3 and 4.2.4); --- Modify the "test flame generation" procedure, specify the parameters of the gas and air flow settings after igniting the gas (see Chapter 5, 2007 edition Chapter 5); --- Increasing the frequency of the test flame to confirm the provisions of (see 6.2). This section uses the translation method identical with IEC 60695-11-2.2013 "Fire hazard test Part 11-2. Test flame 1kW Nominal premixed flame device to confirm the test methods and guidelines. " This section made the following editorial changes. --- In line with the existing standard series, the standard name was changed to "Fire hazard testing for electrical and electronic products Part 14. Test fire Flame 1kW nominal premixed flame device, confirm the test methods and guidelines. " This part is proposed by China Electrical Equipment Industry Association. This part of the National Electrical and Electronic Equipment Fire Dangerous Test Standardization Technical Committee (SAC/TC300) centralized. This section is responsible for the drafting unit. China Electric Apparatus Research Institute Limited. Participated in the drafting of this section. Ministry of Industry and Information Technology Institute of the Fifth, Shanghai Jinfa Technology Development Co., Ltd., Zhuhai Gree Co., Ltd., Wei Kai Testing Technology Co., Ltd., Guangdong CIQ Inspection and Quarantine Technology Center, China Electronics Standard Research Institute of Standardization, Shenzhen Institute of Metrology and Quality Inspection, Wuxi Sunan Test Equipment Co., Ltd., Beijing Terry Te detection technology limited Responsible company, Dongguan City, more Electronic Technology Co., Ltd. The main drafters of this section. Open dare new, Zhang Yuanqin, Xia Jian League, Zhang Long, Yuan Shaoyan, Wu Qian, Liu Yan, Wu Zheng, Li Yuzhen, Wang Shuo South, Ni Yunnan, Kaolin Song, Li Guangbin. This part replaces the standards previously issued as. --- GB/T 5169.7-1985, GB/T 5169.14-2001, GB/T 5169.14-2007.

Introduction

All electrical and electronic product design must consider the risk of fire and potential fire hazard. Design of components, circuits and products as well The purpose of the screening of materials is to potentially fire under normal operating conditions and in reasonably foreseeable abnormal use, failure and failure The risk is reduced to an acceptable level. IEC 60695-1-10 and IEC 60695-1-11 developed by IEC /TC89 together for how to achieve This purpose provides guidance. The primary purpose of IEC 60695-1-10 and IEC 60695-1-11 is to provide guidance for the following behaviors. a) Preventing live parts from causing ignition; b) In the event of a fire, limit the fire to the housing of the electrical and electronic product. The secondary purpose is to minimize the spread of flame to the outside of the product and to minimize the effects of heat, smoke, toxicity and/or corrosive combustion streams Minimize harmful effects. Fires involving electrical and electronic products may also be caused by non-electrical external ignition sources. The overall risk assessment should consider this factor. This section presents the device requirements for producing a 1kW test flame and provides verification procedures for checking the expected flame output power principle. IEC /T S60695-11-40 gives a test guide to confirm the flame test. This section may involve hazardous materials, operations and equipment. Its purpose is not to solve all the security concerns associated with it question. Before using this section, users of this section should establish appropriate safety and health measures, and determine its applicability and limitations. Fire hazard testing for electric and electronic products Part 14. Test flame 1kW nominal premixed flame Device, confirm the test methods and guidelines

1 Scope

GB/T 5169 This section gives the specific requirements for the generation and confirmation of 1kW nominal propane/air premixed test flame. This section is intended for use by product standards committees based on the principles laid down in IEC Guide 104.2010 and ISO /IEC Guide 51.1999. One of the tasks of the product standard committee is to use this series of standards when writing your own standards. Unless otherwise specifically mentioned or listed in the standard, the requirements of this section, test methods or test conditions will not apply.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 16839.1-1997 Thermocouple Part 1. Index Table (idtIEC 60584-1.1995) GB/T 16839.2-1997 Thermocouples Part 2. Tolerance (idtIEC 60584-2.1982) ISO 13943-2008 Fire safety vocabulary (Firesafety-Vocabulary)

3 Terms and definitions

ISO 13943-2008 defined and the following terms and definitions apply to this document. For ease of use, the following list is repeated ISO 13943-2008 some terms and definitions. 3.1 Burning combustion Exothermic reaction of substances with oxidants. NOTE Combustion usually releases a flow of combustion with flames and/or burning. [ISO 13943.2008, Definition 4.46] 3.2 No draft environment draft-freeenvironment The test results are not affected by the local air flow significantly affect the space environment. Note. Qualitative examples, such as a space environment that maintains a substantially steady candle flame. Quantitative examples, such as. Small-scale fire tests, sometimes specified maximum Air velocity 0.1 m/s or 0.2 m/s. [ISO 13943.2008, Definition 4.70] 3.3 Flame (noun) flame (noun) In the gas medium, rapid, spontaneous sustained, subsonic combustion, usually accompanied by luminous phenomenon. [ISO 13943.2008, Definition 4.133]

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 5169.14-2017_English be delivered?

Answer: Upon your order, we will start to translate GB/T 5169.14-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 5169.14-2017_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 5169.14-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 5169.14-2017?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5169.14-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.