|
US$279.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 9058-2024: Odd fluted micrometer
Status: Valid GB/T 9058: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 9058-2024 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Odd fluted micrometer
| Valid |
GB/T 9058-2024
|
| GB/T 9058-2004 | English | 239 |
Add to Cart
|
3 days [Need to translate]
|
Micrometer with prismatically arranged measuring faces
| Obsolete |
GB/T 9058-2004
|
| GB/T 9058-1988 | English | 239 |
Add to Cart
|
2 days [Need to translate]
|
Odd fluted micrometer
| Obsolete |
GB/T 9058-1988
|
PDF similar to GB/T 9058-2024
Basic data | Standard ID | GB/T 9058-2024 (GB/T9058-2024) | | Description (Translated English) | Odd fluted micrometer | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J42 | | Classification of International Standard | 17.040.30 | | Word Count Estimation | 14,142 | | Date of Issue | 2024-04-25 | | Date of Implementation | 2024-11-01 | | Older Standard (superseded by this standard) | GB/T 9058-2004 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 9058-2024: Odd fluted micrometer---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 17:040:30
CCSJ42
National Standards of People's Republic of China
Replace GB/T 9058-2004
Odd Groove Micrometer
Released on 2024-04-25
2024-11-01 Implementation
State Administration for Market Regulation
The National Standardization Administration issued
Table of Contents
Preface III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Type and basic parameters 1
5 General 2
6 Inspection methods 4
7 Logo and packaging 5
References 6
Foreword
This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents"
Drafting:
This document replaces GB/T 9058-2004 "Odd-number groove micrometer": Compared with GB/T 9058-2004, except for structural adjustments and editorial
In addition to the modifications, the main technical changes are as follows:
a) Deleted the odd-numbered groove micrometer with a graduation value of 0:005 mm in the applicable range (see Chapter 1 of the:2004 edition);
b) Added coating appearance requirements (see 5:1:2);
c) The requirements for the change in measuring force of the force measuring device have been changed (see 5:6, 5:5 of the:2004 edition);
d) The requirements for locking devices have been deleted (see 5:6 of the:2004 edition);
e) The requirements for digital display devices have been deleted (see 5:9 of the:2004 edition);
f) Added the requirements for scale (see 5:9);
g) The dimensional deviation and cylindricity tolerance have been changed (see Table 3, Table 3 of the:2004 edition);
h) Added the requirements for ambient temperature under the test conditions (see 6:1);
i) Added the test method for measuring surface hardness (see 6:5);
j) The inspection method for the maximum allowable error has been changed (see 6:6, 6:4 of the:2004 edition);
k) Added the inspection method for calibration cylinder size deviation and cylindricity tolerance (see 6:7):
Please note that some of the contents of this document may involve patents: The issuing organization of this document does not assume the responsibility for identifying patents:
This document was proposed by the China Machinery Industry Federation:
This document is under the jurisdiction of the National Technical Committee for Standardization of Measuring Tools and Instruments (SAC/TC132):
This document was drafted by: Chengdu Tool Research Institute Co:, Ltd:, Guilin Guanglu Digital Measurement and Control Co:, Ltd:, Qinghai Measuring Tools (Changzhou) Co:, Ltd:
Co:, Ltd:, Qinghai Measuring Tools and Cutting Tools Co:, Ltd:, and Suzhou Guoliang Measuring Tools Technology Co:, Ltd:
The main drafters of this document are: He Yixian, Xu Gang, Huang Guiyun, Huang Dawei, Ma Shibin and Zhao Yonghai:
This document was first issued in 1988, revised for the first time in:2004, and this is the second revision:
Odd Groove Micrometer
1 Scope
This document specifies the types and basic parameters, general rules, inspection methods, marking and packaging of odd groove micrometers:
This document is applicable to odd-numbered groove micrometers with graduation values of 0:001mm, 0:002mm, 0:01mm and a measurement upper limit not exceeding 100mm:
design, manufacture and inspection:
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document:
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to this document:
document:
GB/T 1216-2018 Outside micrometer
GB/T 17163 Basic terms for geometric measuring instruments
GB/T 17164 Terminology of geometric measuring instruments Product terminology
3 Terms and definitions
The terms and definitions defined in GB/T 17163 and GB/T 17164 and the following apply to this document:
3:1
With a special V-shaped anvil, it can measure the outside diameter of workpieces with 3, 5 or 7 grooves evenly distributed along the circumference:
4 Types and basic parameters
4:1 Type
The schematic diagram of the odd-number groove micrometer is shown in Figure 1:
The illustrations are for illustrative purposes only and do not represent detailed structures:
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 9058-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 9058-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 9058-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 9058-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 9058-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 9058-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|