|
US$839.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 45307-2025: Opto-electronic measurement - Test methods for main parameters of LiDAR in intelligent operation
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 45307-2025 | English | 839 |
Add to Cart
|
6 days [Need to translate]
|
Opto-electronic measurement - Test methods for main parameters of LiDAR in intelligent operation
| Valid |
GB/T 45307-2025
|
PDF similar to GB/T 45307-2025
Basic data | Standard ID | GB/T 45307-2025 (GB/T45307-2025) | | Description (Translated English) | Opto-electronic measurement - Test methods for main parameters of LiDAR in intelligent operation | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | L50 | | Classification of International Standard | 17.180.99 | | Word Count Estimation | 42,457 | | Date of Issue | 2025-02-28 | | Date of Implementation | 2025-09-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 45307-2025: Opto-electronic measurement - Test methods for main parameters of LiDAR in intelligent operation
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
GB/T 45307-2025 English version. Opto-electronic measurement - Test methods for main parameters of LiDAR in intelligent operation
National Standard of the People's Republic of China
ICS 17.180.99CCS L 50
Photoelectric measurement intelligent control laser radar
Main parameter test methods
Opto⁃electronic measurement-Test methods for main parameters of
LiDAR in intelligent operation
2025-02-28 Release
2025-09-01 Implementation
State Administration for Market Regulation
The National Standardization Administration issued
Table of Contents
Preface...
1 Scope...
2 Normative referenced documents...
3 Terms and Definitions...
4 Test Conditions...
4.1 Environmental Requirements...
4.2 Test Instruments...
This document was proposed by the Chinese Academy of Sciences.
This document is under the jurisdiction of the National Technical Committee for Standardization of Photoelectric Measurement (SAC/TC 487).
This document was drafted by. Aerospace Information Innovation Institute of the Chinese Academy of Sciences, Institute of Microelectronics of the Chinese Academy of Sciences, Beijing Wanji Technology Co., Ltd.
Co., Ltd., Guoke Optoelectronics Technology Co., Ltd., Beijing Beike Tianhui Technology Co., Ltd., Beixing (Beijing) Photonics Technology Co., Ltd.,
Shenzhen Suteng Juchuang Technology Co., Ltd., Beijing Liangdao Intelligent Automobile Technology Co., Ltd., Wuhan Wanji Optoelectronics Technology Co., Ltd., Shenzhen
Leishen Intelligent System Co., Ltd., Shenzhen Lanwo Technology Co., Ltd., Beijing Shenglei Technology Co., Ltd., China North Vehicle Research Institute,
Zhongke Heguang (Tianjin) Applied Laser Technology Research Institute Co., Ltd., Shanghai University of Engineering Science, China Quality Certification Center, Weikai Testing Technology
Co., Ltd. and Beijing Yijing Technology Co., Ltd.
The main drafters of this document are. Ma Yunfeng, Yang Xuebo, Zhu Jingguo, Xie Tianpeng, Wu Aiping, Qu Zhiwei, Cheng Wang, Zhao Peng, Zhang Keshu, Li Yuan,
Yang Yang, Ju Xueming, Wang Pu, Dunbo, Hu Xiaobo, Li Tao, Zhang Guoxin, Li Yazhou, Shu Da, Zou Long, Wang Zhe, Bai Fang, Cao Chenxin, Guo Guangyan, Huang Yutao,
Zhang Pengfei, Yin Chenxuan, Wang Ran, Jiang Nan, Zhang Zhiqiang, Ling Ming, Wang Jiangdong, Guo Jintian, Li Yunxiang.
Photoelectric measurement intelligent control laser radar
Main parameter test methods
1 Scope
This document defines the relevant terms and definitions of the test methods for the main parameters of intelligent control laser radars, and describes the
Test conditions for radar main parameter test methods, performance parameter test methods and environmental adaptability test methods, etc.
This document is applicable to intelligent control automated production lines, intelligent control warehousing and logistics vehicles, intelligent control road vehicles, and intelligent control rail vehicles.
Laser radars used in vehicles, special vehicles and special vehicles, and laser radars for other purposes are used for reference.
Note. For intelligent control laser radar, see Appendix A.
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies.
in this document.
GB/T 7247.1 Safety of laser products Part 1.Equipment classification and requirements
GB/T 7247.13 Safety of laser products Part 13.Classification and measurement of laser products
GB/T 16422.2-2022 Plastics laboratory light source exposure test method Part 2.Xenon arc lamp
GB/T 18655-2018 Radio disturbance characteristics of vehicles, ships and internal combustion engines - Limits and measurements for the protection of on-board receivers
method
GB/T 19951-2019 Test method for immunity of electrical/electronic components of road vehicles to electrostatic discharge
GB/T 21437.2-2021 Test methods for electrical disturbances caused by conduction and coupling of electrical/electronic components of road vehicles Part 2
Part. Electrical transient conducted emissions and immunity along power lines
GB/T 21437.3-2021 Test methods for electrical disturbances caused by conduction and coupling of electrical/electronic components of road vehicles Part 3
. Immunity to transients coupled to non-power lines
GB/T 28046.2-2019 Environmental conditions and tests for electrical and electronic equipment of road vehicles Part 2.Electrical loads
GB/T 28046.3-2011 Environmental conditions and testing for electrical and electronic equipment of road vehicles Part 3.Mechanical loads
GB/T 28046.4-2011 Environmental conditions and tests for electrical and electronic equipment of road vehicles Part 4.Climatic loads
GB/T 30038 Degrees of protection for electrical and electronic equipment of road vehicles (IP Code)
GB/T 33014.2-2016 Test methods for immunity of electrical/electronic components of road vehicles to narrowband radiated electromagnetic energy Part 2
Division. Anechoic chamber method
GB/T 33014.4-2016 Test methods for immunity of electrical/electronic components of road vehicles to narrowband radiated electromagnetic energy Part 4
Points. Bulk Current Injection (BCI) method
GB 34660-2017 Requirements and test methods for electromagnetic compatibility of road vehicles
ISO 20567-1.2017 Determination of the scratch resistance of paints and varnishes to stone chips Part 1.Multiple impact test
and varnishes-Determination of stone⁃chip resistance of coatings-Part 1.Multi⁃impact testing)
3 Terms and definitions
The following terms and definitions apply to this document.
|