|
US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 43912-2024: Foundry machinery - Remanufacturing - General technical specifications
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 43912-2024 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Foundry machinery - Remanufacturing - General technical specifications
| Valid |
GB/T 43912-2024
|
PDF similar to GB/T 43912-2024
Basic data | Standard ID | GB/T 43912-2024 (GB/T43912-2024) | | Description (Translated English) | Foundry machinery - Remanufacturing - General technical specifications | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J61 | | Classification of International Standard | 25.120.30 | | Word Count Estimation | 14,133 | | Date of Issue | 2024-04-25 | | Date of Implementation | 2024-11-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 43912-2024: Foundry machinery - Remanufacturing - General technical specifications---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 25:120:30
CCSJ61
National Standards of People's Republic of China
General technical specifications for foundry machinery remanufacturing
Released on 2024-04-25
2024-11-01 Implementation
State Administration for Market Regulation
The National Standardization Administration issued
Table of Contents
Preface III
Introduction IV
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Basic Requirements 1
5 Recycling, dismantling and cleaning/cleaning 2
5:1 Recycling 2
5:2 Disassembly 2
5:3 Cleaning/cleaning 2
5:4 Safety and Environmental Protection 2
6 Parts Inspection, Sorting and Remanufacturability Assessment 2
6:1 Parts inspection and classification 2
6:2 Remanufacturability Assessment 3
7 Remanufacturing design, processing and assembly 3
7:1 Design for Remanufacturing 3
7:2 Remanufacturing, processing and assembly 3
8 Factory Inspection 3
9 Labelling, packaging, transportation and storage 4
9:1 Identification 4
9:2 Packaging, transportation and storage 4
Appendix A (Informative) Casting Machinery Product Remanufacturing Process Flow 5
References 6
Figure A:1 Flow chart of the remanufacturing process of casting machinery products 5
Foreword
This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents"
Drafting:
Please note that some of the contents of this document may involve patents: The issuing organization of this document does not assume the responsibility for identifying patents:
This document was proposed by the China Machinery Industry Federation:
This document is under the jurisdiction of the National Foundry Machinery Standardization Technical Committee (SAC/TC186):
This document was drafted by: Nan'an Zhongji Standardization Research Institute Co:, Ltd:, Guangdong Hongtu Nantong Die Casting Co:, Ltd:, Jinan Casting and Forging Institute
Yan Testing Technology Co:, Ltd:, Huace Testing & Certification Group Co:, Ltd:, Jiayan Tetra Pak (Xiamen) Trading Co:, Ltd:, Qingdao Henglin Industrial
Group Co:, Ltd:, Wenzhou Ruier Metal Manufacturing Co:, Ltd:, Zhejiang Wanfeng Technology Development Co:, Ltd:, Huzhou Nanfeng Machinery Manufacturing
Co:, Ltd:, Zhejiang Bodong Industry and Trade Co:, Ltd:, Gongqing Vocational College of Science and Technology, Fujian Minxuan Technology Co:, Ltd:, Qingdao University of Technology,
Anqing Normal University, Qingdao Antai Heavy Industry Machinery Co:, Ltd:, Qingdao Zhongzhida Environmental Protection Melting Equipment Co:, Ltd:, Sichuan Zhonganke Safety Technology
Co:, Ltd:, Quanzhou Standardization Institute, Quanzhou Standardization Association, China Automotive Industry Engineering Co:, Ltd:, Shandong Jiechuang Machinery Co:, Ltd:
Qingdao Sanrui Machinery Manufacturing Co:, Ltd:, Qingdao Kaijie Heavy Industry Machinery Co:, Ltd:, Qingdao Qingli Environmental Protection Equipment Co:, Ltd:, Qingdao Benuo Magnetics
Electric Technology Co:, Ltd:, Weihai Gongyou Casting Machinery Co:, Ltd:, Dongguan Xinzhidian Technology Service Co:, Ltd:, Guangzhou Zhongshan Precision Technology Co:, Ltd:
Co:, Ltd:, Shandong Kaitai Shot Blasting Machinery Co:, Ltd:, Jinan Ruisheng Foundry Machinery Co:, Ltd:, and Shandong Jianzhu University:
The main drafters of this document are: Zhu Bin, Yan Feng, Li Chen, Huang Qing, Chen Yongman, Qu Xianjun, Yang Jianxiong, Wu Jun, Yao Jiantang, Ji Gang, Li Yuman,
Zhang Sen, Tan Min, Zhang Chunling, Zhang Xuxia, Chen Huiling, Zhang Guangming, Wu Qiong, Ding Renxiang, Duan Yudong, Duan Jinting, Qin Peiyun, Lin Zhijie, Huang Zhiqiang,
Liu Xiaolong, Lu Jun, Sun Shanshan, Bao Yanqing, Wang Decheng, Wu Guangxin, Su Liguo, Yu Kuopei, Li Haichun, Zhao Peng, Li Yi, Lü Jiangang, Zhang Xiao, Xiang Ziqiang,
Jing fiscal year:
Introduction
Remanufacturing refers to the use of special processes and technical means to recycle products that have use value but have been functionally damaged or technically obsolete:
The obsolete products that are no longer in use are repaired, modified or upgraded to achieve or exceed the quality and performance of the original new products:
Remanufacturing can achieve the reuse of waste products, reduce resource consumption and environmental pollution, save energy, and reduce harmful substances such as greenhouse gases:
Remanufacturing helps promote sustainable development and has become an important part of the circular economy and low-carbon economy:
China is a major foundry country in the world, and also a major producer and user of foundry machinery: There are many old foundry machines that need to be replaced:
If the products are directly eliminated and scrapped, a large amount of waste will be generated, resulting in a waste of resources: Therefore, it is very necessary to develop the remanufacturing of casting machinery:
This document aims to develop a scientific, reasonable, operational and economical general guideline for the remanufacturing of foundry machinery for remanufacturing enterprises:
The purpose of the technical specification is to:
--- Provide requirements and technical guidance for the remanufacturing of casting machinery;
---Improve the quality requirements of foundry machinery remanufacturing products;
---Promote the healthy development of foundry machinery remanufacturing:
General technical specifications for foundry machinery remanufacturing
1 Scope
This document specifies the basic requirements for foundry machinery remanufacturing, recycling, disassembly and cleaning/cleaning, parts testing, sorting and remanufacturing
Evaluation, remanufacturing design, processing and assembly, factory inspection, labeling, packaging, transportation and storage:
This document applies to the remanufacturing of foundry machinery:
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this text:
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document:
GB/T 25711 General technical specification for foundry machinery
GB/T 27611 General requirements and labeling for recycled and remanufactured products
GB/T 28619-2012 Remanufacturing terminology
GB/T 31208 Quality inspection method for remanufactured blanks
GB/T 32811 Technical specification for remanufacturability evaluation of mechanical products
GB/T 35978 Technical Guidelines for Inspection of Remanufactured Mechanical Products
3 Terms and definitions
The terms and definitions defined in GB/T 28619-2012 and the following apply to this document:
3:1
Used casting machinery or parts that have use value but are no longer used due to functional damage or technical obsolescence:
3:2
Remanufacturing
The process of professionally repairing or upgrading remanufactured blanks to make their quality characteristics no less than the level of the original new product:
Note 1: Quality characteristics include product functions, technical performance, greenness and economy, etc:
Note 2: The remanufacturing process generally includes the recovery, inspection, disassembly, cleaning, classification, evaluation, repair processing, reassembly, testing, labeling and packaging of remanufactured blanks:
Equipment etc:
[Source: GB/T 28619-2012, 2:2]
3:3
Casting machinery products (complete machines or parts) that have gone through the remanufacturing process and met the remanufacturing requirements and are put back on the market for sale:
4 Basic Requirements
4:1 The casting machinery remanufacturing (hereinafter referred to as “remanufacturing”) process shall be carried out according to the set process flow (see Appendix A):
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 43912-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 43912-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 43912-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 43912-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|