HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 42919.6-2023 English PDF

US$349.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 42919.6-2023: Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 42919.6-2023English349 Add to Cart 4 days [Need to translate] Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique Valid GB/T 42919.6-2023

PDF similar to GB/T 42919.6-2023


Standard similar to GB/T 42919.6-2023

GB/T 42976   GB/T 42977   GB/T 42924.1   GB/T 42919.4   GB/T 42918.2   GB/T 42919.3   

Basic data

Standard ID GB/T 42919.6-2023 (GB/T42919.6-2023)
Description (Translated English) Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard G31
Classification of International Standard 83.080.01
Word Count Estimation 18,176
Date of Issue 2023-08-06
Date of Implementation 2024-03-01
Issuing agency(ies) State Administration for Market Regulation, China National Standardization Administration

GB/T 42919.6-2023: Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique



---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 83.080.01 CCSG31 National Standards of People's Republic of China Determination of thermal conductivity and thermal diffusion coefficient of plastics Part 6.Comparative method based on temperature modulation technology Published on 2023-08-06 2024-03-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration Committee

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document is Part 6 of GB/T 42919 "Determination of Thermal Conductivity and Thermal Diffusion Coefficient of Plastics". GB/T 42919 has been released The following parts. ---Part 1.General principles; ---Part 3.Temperature wave analysis method; ---Part 4.Laser flash method; ---Part 6.Comparative method based on temperature modulation technology. This document is modified using ISO 22007-6.2014 "Determination of thermal conductivity and thermal diffusivity of plastics - Part 6.Based on temperature adjustment" Comparative approach to manufacturing technology. Compared with ISO 22007-6.2014, this document has made the following structural adjustments. ---The sixth and seventh paragraphs of Chapter 4 correspond to the second and third paragraphs of Chapter 1 of ISO 22007-6.2014; ---5.1 corresponds to the introductory words of ISO 22007-6.2014 Chapter 5, and then 5.2~5.6 corresponds to 5.1~ in ISO 22007-6.2014 5.5; ---The items listed in 5.3 correspond to 5.2.1~5.2.3 in ISO 22007-6.2014; ---The second paragraph of 5.4 corresponds to 6.2 in ISO 22007-6.2014; ---6.1 and 6.2 correspond to 6.3 and 6.4 in ISO 22007-6.2014. The technical differences between this document and ISO 22007-6.2014 and their reasons are as follows. ---Deleted the fourth and sixth paragraphs in Chapter 1 of ISO 22007-6.2014 because they do not fall within the scope; ---Replaced ISO 472 and GB/T 42919.1 with normatively cited GB/T 2035 to replace ISO 22007-1 (see Section 3 Chapter) to adapt to my country's technical conditions and increase operability; ---Replaced ISO 22007-3 (see Chapter 3 and Chapter 4) with the normatively quoted GB/T 42919.3 to adapt to my country's technical conditions parts to increase operability; ---Deleted 6.1 in ISO 22007-6.2014 because it does not fall within the requirements for specimens; ---Changed the requirements for reporting information in Chapter 9 "Test Report" of ISO 22007-6.2014 to adapt to my country's technical conditions. The following editorial changes have been made to this document. ---Change the calculation formulas in the terms and definitions of "Gain", "Thermal Penetration Depth" and "Thermal Diffusion Length" to the content of Note; ---Added the calculation formula and explanation of the relevant symbols of "kd < < 1" in the third paragraph of Chapter 4; ---Changed "Figure 2 and Figure 3" in 5.2.3 in ISO 22007-6.2014 to "Figure 1 and Figure 2" in column 5.3 of this document because ISO 22007-6.2014 mentions errors; ---Changed the last sentence of Note 6.2 in ISO 22007-6.2014 as the recommended clause "Probe" in 5.4 of this document The thermal conductivity should be similar to that of the sample” (see 5.4, note of 6.2 in ISO 22007-6.2014). Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents. This document is proposed by China Petroleum and Chemical Industry Federation. This document is under the jurisdiction of the National Plastics Standardization Technical Committee (SAC/TC15). This document was drafted by. Foshan Tuyi Decoration Materials Technology Co., Ltd., Guangdong Wenli Inspection and Appraisal Co., Ltd., SAIC-GM-Wuling Automobile Co., Ltd., Zhonglan Chenguang Chemical Research and Design Institute Co., Ltd., Xiamen Ousheng Technology Co., Ltd., Fuan Ronghe Electronics Technology Co., Ltd. Technology Co., Ltd., Jilin Provincial Product Quality Supervision and Inspection Institute, Qingdao Hairong Commercial Cold Chain Co., Ltd., Dongguan Xiangzhijing E-Commerce Co., Ltd. Co., Ltd., Qingdao Xinhengde Electric Co., Ltd., Changxu Electronic Products (Shenzhen) Co., Ltd., Jiangsu Damoniu New Materials Co., Ltd., Zhonghua Qingdao Dagang Customs of the Republic of China. The main drafters of this document. Xie Peng, Deng Jinshang, Lan Xian, Wu Yanjun, Liu Jinhua, Chen Guang, Yu Riming, Li Shangyu, Yin Shanmin, Lin Yalun, Wang Litao, Yang Jinhai, Zhang Yuanting, Gao Jianguo.

Introduction

The thermal insulation properties of plastics are particularly important in certain areas. Microscale thermal conductivity design of plastics requires a test method that is suitable for Suitable for testing on smaller sizes using a small number of samples (such as food trays, thermal printing films, gel sheets of internal electrical components of laptops, adhesives, etc.) A relatively low thermal conductivity [such as less than 1.0W/(m·K)]. This paper proposes a highly sensitive thermopile dual-sensor system that The sensors of the system are located at different distances from the modulated temperature field and are controlled by the Peltier thermal module. The conductivity of the plastic is obtained by measuring the attenuation of the temperature wave. thermal coefficient. Compared with pulse method or transient method, temperature modulation technology has the characteristics of high sensitivity and high temperature resolution. The use of lock-in amplifier can reduce Less noise and interference. This document specifies a modulated temperature method to determine the thermal conductivity with small temperature changes, thereby integrating the effects of radiation and convection. noise to a minimum. GB/T 42919 "Determination of Thermal Conductivity and Thermal Diffusion Coefficient of Plastics" is intended to consist of six parts. ---Part 1.General principles. The purpose is to establish common definitions and methods for measuring thermal conductivity and thermal diffusivity. content. ---Part 2.Transient plane heat source (hot plate) method. The purpose is to determine the transient plane of the thermal conductivity and thermal diffusivity of plastics. Heat source (hot plate) method establishes operable, traceable, and verifiable procedures. ---Part 3.Temperature wave analysis method. The purpose is to establish a temperature wave analysis method for measuring the thermal conductivity and thermal diffusion coefficient of plastics. Actionable, traceable, and verifiable procedures. ---Part 4.Laser flash method. The purpose is to establish an operable method for the laser flash method to determine the thermal conductivity and thermal diffusion coefficient of plastics. operational, traceable, and verifiable procedures. ---Part 5.Interlaboratory test results of polymethylmethacrylate samples. The purpose is to conduct polymethylpropylene testing through multiple laboratories. The thermal conductivity and thermal diffusion coefficient of methyl olefinate are measured and test data are provided. ---Part 6.Comparative method based on temperature modulation technology. The purpose is to provide a method for determining the ratio of low thermal conductivity using temperature modulation techniques. Compare laws and establish operable, traceable and verifiable procedures. Determination of thermal conductivity and thermal diffusion coefficient of plastics Part 6.Comparative method based on temperature modulation technology

1 Scope

This document describes a temperature modulation method for determining thermal conductivity, with input temperature deviations less than 1 K, using the double phase locking method to amplify tiny temperature modulation. This document applies to plastic materials with thermal conductivity coefficients of 0.026W/(m·K)~0.6W/(m·K). Note. Appendix A gives the thermal conductivity test conditions and test results of two types of foam plastics.

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document. GB/T 2035 Plastic terms and definitions (GB/T 2035-2008, ISO 472.1999, IDT) GB/T 42919.1 Determination of thermal conductivity and thermal diffusivity of plastics Part 1.General principles (GB/T 42919.1-2023, ISO 22007-1.2017,MOD) GB/T 42919.3 Determination of thermal conductivity and thermal diffusion coefficient of plastics Part 3.Temperature wave analysis method (GB/T 42919.3-2023,ISO 22007-3.2008,MOD) ISO 80000-5 Quantities and units Part 5.Thermodynamics (Quantitiesandunits-Part 5.Thermodynamics)

3 Terms and definitions

The following terms and definitions defined in GB/T 2035, GB/T 42919.1, GB/T 42919.3 and ISO 80000-5 apply to this document. document. 3.1 Amp Modulates the amplitude of temperature oscillations produced by a power heat source. Note. Temperature modulation amplitude is expressed in Kelvin (K). 3.2 Gain The ratio of the temperature modulation amplitude of the probe rear surface (x=d) to the probe front surface (x=0). Note. Gain is calculated according to formula (1). ζ= Td T0 = Ampx=d Ampx=0 (1) In the formula. T0---The temperature modulation amplitude measured on sensor 1 (x=0). Td---The temperature modulation amplitude measured on sensor 2 (x=d).

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 42919.6-2023_English be delivered?

Answer: Upon your order, we will start to translate GB/T 42919.6-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 42919.6-2023_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 42919.6-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.