|
US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 42910-2023: Test methods for shear strength by compression loading at high temperature of inorganic adhesives
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 42910-2023 | English | 189 |
Add to Cart
|
3 days [Need to translate]
|
Test methods for shear strength by compression loading at high temperature of inorganic adhesives
| Valid |
GB/T 42910-2023
|
PDF similar to GB/T 42910-2023
Basic data | Standard ID | GB/T 42910-2023 (GB/T42910-2023) | | Description (Translated English) | Test methods for shear strength by compression loading at high temperature of inorganic adhesives | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G38 | | Classification of International Standard | 83.180 | | Word Count Estimation | 10,146 | | Date of Issue | 2023-08-06 | | Date of Implementation | 2024-03-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 42910-2023: Test methods for shear strength by compression loading at high temperature of inorganic adhesives
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 83.180
CCSG38
National Standards of People's Republic of China
Test method for high temperature compression shear strength of inorganic adhesives
Published on 2023-08-06
2024-03-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration Committee
Foreword
This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents"
Drafting.
Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents.
This document is proposed by China Petroleum and Chemical Industry Federation.
This document is under the jurisdiction of the National Adhesive Standardization Technical Committee (SAC/TC185).
This document was drafted by. Institute of Petrochemistry, Heilongjiang Academy of Sciences, Harbin Engineering University, and Shandong Industrial Ceramics Research and Design Institute.
Co., Ltd., Shanghai Rubber Products Research Institute Co., Ltd., Xiamen Jiehang Engineering Inspection Technology Co., Ltd., Heilongjiang Provincial Market Supervision and Management Review
Inspection Center, China Adhesive and Adhesive Tape Industry Association, Fujian Rongcheng Testing Technology Co., Ltd., Zhongshan Crown Adhesive Products Co., Ltd.
Company, Shenzhen Huatianqi Technology Co., Ltd., Guangdong Crown New Material Technology Co., Ltd., Shanghai Jianke Deep Water Port Inspection Co., Ltd., Suzhou
Jianxiong Vocational and Technical College.
The main drafters of this document. Liang Xiliang, Cao Xianqi, Zhang Chunhong, Ma Chicheng, Jiang Liping, Tang Jianxin, Zhang Chunrong, Li Bing, Shen Yan, Li Bohong,
Wang Yanyan, Yang Zhenquan, Wang Xu, Wang Wenbo, Gan Lutong, Lin Shishi, Li Jianxiong, Yang Jie, Wang Chao, Fu Pan, Li Chunlei, Chen Zeming, Wei Yunzhao,
Liu Shiqi, Li Jingcheng, Jia Hongsheng.
Test method for high temperature compression shear strength of inorganic adhesives
1 Scope
This document describes a test method for determining the compressive shear strength of inorganic adhesives under elevated temperature conditions.
This document is suitable for overlapping compression between heat-resistant ceramics, composite materials and other non-metallic materials within the temperature range of 300℃~1000℃
Determination of shear strength.
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations
For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to
this document.
GB/T 2943 Adhesive terminology
GB/T 16997 Representation of the main damage types of adhesives
GB/T 20740 Adhesive sampling
3 Terms and definitions
The terms and definitions defined in GB/T 2943 apply to this document.
4 Principles
In dry hot air at a set temperature, a compressive load is applied axially along the length of the specimen to cause damage to the single lap joint.
The maximum compressive shear force on the joint is the compressive shear strength at that temperature. The test pieces are two parallel test pieces with inorganic adhesive applied in the middle.
single lap structure.
Note. The shear strength values obtained from single lap adhesive joints cannot be used as the design stress for structural adhesive joints.
5 Test equipment
Test equipment should meet the following requirements.
a) The relative error of the testing machine load does not exceed ±1%;
b) When selecting the tonnage of the testing machine, refer to the instruction manual of the machine;
c) Obtain a constant test speed;
d) The testing machine is equipped with a high-temperature furnace with automatic temperature control, and the temperature control accuracy is ±2°C;
e) The testing machine is equipped with an automatically leveling high-temperature-resistant holder for compression and shear testing (as shown in Figure 1). The holder is made of high-temperature-resistant material.
alloy.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 42910-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 42910-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 42910-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 42910-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|