|
US$299.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 43747-2024: Evaluation of adhesion properties of sealants - Strip peel method
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 43747-2024 | English | 299 |
Add to Cart
|
3 days [Need to translate]
|
Evaluation of adhesion properties of sealants - Strip peel method
| Valid |
GB/T 43747-2024
|
PDF similar to GB/T 43747-2024
Basic data | Standard ID | GB/T 43747-2024 (GB/T43747-2024) | | Description (Translated English) | Evaluation of adhesion properties of sealants - Strip peel method | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G38 | | Classification of International Standard | 83.180 | | Word Count Estimation | 14,165 | | Date of Issue | 2024-03-15 | | Date of Implementation | 2024-10-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 43747-2024: Evaluation of adhesion properties of sealants - Strip peel method---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 83.180
CCSG38
National Standards of People's Republic of China
Evaluation of sealant adhesion - Strip peeling method
Released on 2024-03-15
2024-10-01 Implementation
State Administration for Market Regulation
The National Standardization Administration issued
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting.
This document is modified to adopt ISO 23658.2020 "Testing the adhesion of sealants for building and civil engineering - Peel test".
Compared with ISO 23658.2020, this document has many structural adjustments. Comparison table of structural number changes between the two documents
See Appendix A.
This document has many technical differences compared to ISO 23658.2020.
A single line (|) is used to indicate these technical differences. A list of these technical differences and their reasons is given in Appendix B.
The following editorial changes were made to this document.
--- In order to coordinate with the existing standards, the name of the standard is changed to "Evaluation of sealant adhesion - Strip peeling method";
--- Deleted the examples in aging simulation (see Chapter 7) to adapt to my country's national conditions;
---Removed references.
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document was proposed by the China Petroleum and Chemical Industry Federation.
This document is under the jurisdiction of the National Technical Committee for Standardization of Adhesives (SAC/TC185).
This document was drafted by. Hangzhou Zhijiang Silicone Chemical Co., Ltd., Shanghai Rubber Products Research Institute Co., Ltd., Henkel AG
Dow (Shanghai) Investment Co., Ltd., Guangzhou Baiyun Chemical Industry Co., Ltd., Hangzhou Zhijiang New Materials Co., Ltd., Fujian Shangruo Engineering
Technology Co., Ltd., Dongguan Poloma New Materials Technology Development Co., Ltd., Shanghai University of Engineering Science, Shenzhen Kanglibang Technology Co., Ltd.
Co., Ltd., Shanghai Plastics Research Institute Co., Ltd.
The main drafters of this document are. Tao Xiaole, Shen Yan, Li Yunlong, Liu Guoguang, Wang Wenkai, Chen Jianjun, Fu Zien, Shen Yiyao, Zheng Suqin,
Guo Zhengchao, Yu Zelin, Lin Jinzong, Li Song, Chen Chen, Yue Shengwu.
Evaluation of sealant adhesion - Strip peeling method
1 Scope
This document describes the minimum elongation at break greater than 25% of the sealant and various substrates (including but not limited to. glass, aluminum, aluminum-plastic panels,
Test method for adhesion of plastics (stone, etc.).
This document is applicable to the evaluation of sealant adhesion using the strip peeling method.
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document.
GB/T 2943 Adhesive Terminology
GB/T 16997 Method for expressing the main failure types of adhesives (GB/T 16997-1997, ISO 10365.1992, IDT)
GB/T 21526 Guidelines for surface preparation of metals and plastics before bonding with structural adhesives
GB/T 33403 Test method for self-leveling properties of adhesives
3 Terms and definitions
The terms and definitions defined in GB/T 2943 and GB/T 33403 apply to this document.
4 Principle
The sealant is applied to the substrate and after curing under specified conditions or specific aging conditions, the sealant sample is peeled off the substrate with a handheld tool.
Separate the sealant from the substrate and test the adhesion of the sealant to the substrate, and record the type of sealant failure.
5.Specimen preparation
5.1 Specimen preparation and pretreatment
5.1.1 Sample conditioning. Place the packaged sealant in an environment with a temperature of (23 ± 2) °C and a relative humidity of (50 ± 10)% for at least 24 h.
In case of multi-component samples, all components should be processed simultaneously.
5.1.2 Selection of substrate and surface treatment. Surface treatment should be carried out in accordance with GB/T 21526.
According to the requirements, select the corresponding substrate and surface treatment method.
5.1.3 Test tools. glue dispenser, sharp knife or glue breaker.
5.2 Preparation of sealing strips
5.2.1 Mold-free method
This method is applicable to non-self-leveling sealants. According to the test purpose, no less than two sealant strips should be prepared on each substrate.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 43747-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 43747-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 43747-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 43747-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|