|
US$579.00 ยท In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 42325-2023: Electrical interface specification for phase-cut dimmer in phase-cut dimmed lighting systems
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 42325-2023 | English | 579 |
Add to Cart
|
5 days [Need to translate]
|
Electrical interface specification for phase-cut dimmer in phase-cut dimmed lighting systems
| Valid |
GB/T 42325-2023
|
PDF similar to GB/T 42325-2023
Basic data | Standard ID | GB/T 42325-2023 (GB/T42325-2023) | | Description (Translated English) | Electrical interface specification for phase-cut dimmer in phase-cut dimmed lighting systems | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K60 | | Classification of International Standard | 29.020 | | Word Count Estimation | 30,380 | | Date of Issue | 2023-03-17 | | Date of Implementation | 2023-10-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 42325-2023: Electrical interface specification for phase-cut dimmer in phase-cut dimmed lighting systems
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS29:020
CCSK60
National Standards of People's Republic of China
Phase-cut dimmer in phase-cut dimming lighting system
Electrical Interface Specification
lighting systems
(IEC TR63036:2016,MOD)
Released on 2023-03-17
2023-10-01 implementation
State Administration for Market Regulation
Released by the National Standardization Management Committee
table of contents
Preface III
Introduction IV
1 Scope 1
2 Normative references 1
3 Terms and Definitions 2
4 General 4
5 General requirements 4
6 Description of the lighting system and its components4
7 Electrical Specifications 5
8 Test procedure 15
Appendix A (Normative) AC Voltage Source Waveform 21
Appendix B (Normative) Equivalent circuit (EC_CG) of the open state of the control device 22
Appendix C (Normative) Equivalent circuit of closed state of control device 23
Reference 24
Figure 1 Wiring Diagram Example 5
Figure 2 Timing leading edge dimming method 7
Figure 3 Timing trailing edge dimming method 11
Figure 4 Test circuit for non-conduction period characteristics of phase-cut dimmer (method 1) 16
Figure 5 Test circuit for non-conduction period characteristics of phase-cut dimmer (method 2) 17
Figure 6: Experimental circuit for switching from non-conduction period to conduction period characteristics of phase-cut dimmer 18
Fig: 7 Test circuit 20 for characteristics of phase-cut dimmer in electronic off state
Figure A:1 AC voltage source waveform --- leading edge 21
Figure A:2 AC voltage source waveform --- trailing edge 21
Figure B:1 Equivalent circuit in which the control device used in the dimmer test is in the open state 22
Figure C:1 Equivalent circuit of the control device in the closed state 23
Table 1 Nominal power supply voltage 100V --- frequency 50Hz or 60Hz 8
Table 2 Nominal power supply voltage 120V---Frequency 50Hz or 60Hz 8
Table 3 Nominal power supply voltage:200V---Frequency 50Hz or 60Hz 8
Table 4 Nominal power supply voltage 230V --- frequency 50Hz or 60Hz 8
Table 5 Nominal power supply voltage 277V --- frequency 50Hz or 60Hz 9
Table 6 Slew rate for voltage drop of phase-cut dimmer9
Table 7 Nominal power supply voltage 100V---frequency 50Hz or 60Hz 9
Table 8 Nominal power supply voltage 120V --- frequency 50Hz or 60Hz 10
Table 9 Nominal power supply voltage:200V --- frequency 50Hz or 60Hz 10
Table 10 Nominal power supply voltage 230V --- frequency 50Hz or 60Hz 10
Table 11 Nominal power supply voltage 277V --- frequency 50Hz or 60Hz 10
Table 12 Nominal power supply voltage 277V --- frequency 50Hz or 60Hz 12
Table 13 Nominal power supply voltage 100V---frequency 50Hz or 60Hz 13
Table 14 Nominal power supply voltage 120V --- frequency 50Hz or 60Hz 13
Table 15 Nominal power supply voltage:200V---frequency 50Hz or 60Hz 13
Table 16 Nominal power supply voltage 230V---frequency 50Hz or 60Hz 14
Table 17 Nominal power supply voltage 277V---frequency 50Hz or 60Hz 14
Table 18 Current and voltage of control gear in electronically closed state 15
Table 19 Parameters used for the test 15
foreword
This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents"
drafting:
This document is modified to adopt IEC TR63036:2016 "Specification for the electrical interface of phase-cut dimmers in phase-cut dimming lighting systems", document category
The type is adjusted from the IEC technical report to the national standard of our country:
The technical differences between this document and IEC TR63036:2016 and their reasons are as follows:
--- Replaced IEC 60050-845 with GB/T 2900:65 referenced normatively to adapt to my country's technical conditions and increase operability
(see Chapter 3);
--- Replaced IEC 60038 with the normatively quoted GB/T 156 to adapt to my country's technical conditions and increase operability (see 5:1,
5:2);
--- Replaced IEC 60364 (all parts) with the normatively quoted GB/T 16895 (all parts) to adapt to my country's technical regulations
components, increase operability (see 6:1);
--- Replaced IEC 62504 with the normatively quoted GB/T 24826 to adapt to my country's technical conditions and increase operability (see Section 3
chapter):
The following editorial changes have been made to this document:
--- Added "This document applies to the electrical interface of phase-cut dimmers in phase-cut dimming lighting systems" in "Scope" (see Chapter 1);
--- Changed Figure 2 of the editorial error in IEC TR63036:2016 (see Figure 2):
Please note that some contents of this document may refer to patents: The issuing agency of this document assumes no responsibility for identifying patents:
This document is proposed by China Electrical Equipment Industry Association:
This document is under the jurisdiction of the National Electrical Accessories Standardization Technical Committee (SAC/TC67):
This document is drafted by: Weikai Certification and Testing Co:, Ltd:, Guangdong Hobot Technology Co:, Ltd:, Jiangsu Tongling Technology Co:, Ltd:,
Zhejiang Zhilun Home Furnishing Technology Co:, Ltd:, Shenzhen Youtepu Technology Co:, Ltd:, Simon Electric (China) Co:, Ltd:, Zhejiang Best Electric Co:, Ltd:
Co:, Ltd:, China Electric Apparatus Research Institute Co:, Ltd:, Zhongshan Lion Heart Electric Co:, Ltd:, Guangzhou Yida Technology Co:, Ltd:,
Zhejiang Yuehua Telecommunications Co:, Ltd:, Shenzhen Yuehongpu Intelligent Photoelectric Technology Co:, Ltd:, Ningbo Xingxing Standard Technology Co:, Ltd:, Guangdong Manchuria
Asia Technology Co:, Ltd:, Guangzhou Hancheng Testing Technology Service Co:, Ltd:, Guangdong Orange Apricot Testing Co:, Ltd:, Guangdong Zhongren South China Testing Technology Co:, Ltd:
Co:, Ltd:, Xi'an Libeian Intelligent Technology Co:, Ltd:, Guangdong Chaoyong Detection Technology Co:, Ltd:, Ningbo Runaxis Technology Co:, Ltd:, Xi'an Xinlin
Da Digital Technology Co:, Ltd:, Yiwu Kangshuo Plastic Products Co:, Ltd:
The main drafters of this document: Jing Yixin, Liu Jian, Chen Bin, Cai Jun, Nie Huaidong, Liu Yue, Xiao Qianli, Wang Zhesi, Qiao Cheng, Sun Ting, Zhang Jilan,
Geng Jian, Wang Sheng, Tang Pengfei, Ke Jinming, Su Shiqiao, Wu Guoping, Liu Xufang, Ren Yan, Liu Songlin, Deng Weihong, Wu Finance, Zheng Fei, Hu Zhuohuai, Yan Hua,
Yang Minghua:
Introduction
The purpose of this document is to establish the technical requirements for phase-cut dimmers for control equipment and self-ballasts: For a full picture of the technical requirements see
IEC TR63037, which contains technical requirements and test methods for control equipment and self-ballasted lamps:
Phase-cut dimmer in phase-cut dimming lighting system
Electrical Interface Specification
1 Scope
This document specifies the electrical interface and test procedures for controlling the brightness of mains-powered electronic lighting equipment using mains voltage phase-cut dimmers
These devices are intended to be controlled by mains voltage phase-cut dimmers, such as LED integrated lamps and light sources with external control gear:
This document applies to the electrical interface of phase-cut dimmers in phase-cut dimming lighting systems:
A similar circuit using a phase-cut dimmer but not including an electronic switch with adjustable phase-cut angle is implemented with reference to the same phase-cut dimmer:
Safety requirements are not included in this document, but are included in the respective product standards:
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references
For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
this document:
GB/T 156 standard voltage (GB/T 156-2017, IEC 60038:2009, MOD)
GB/T 2900:65 Electrotechnical term lighting (GB/T 2900:65-2004, IEC 60050(845):1987, MOD)
GB/T 16895 (all parts) Low-voltage electrical installations [IEC 60364 (all parts)]
Note: GB/T 16895:1-2008 Low-voltage electrical installations Part 1: Basic principles, general characteristic evaluation and definitions (IEC 60364-1:2005, IDT)
GB/T 16895:2-2017 Low-voltage electrical installations Part 4-42: Safety protection Thermal effect protection (IEC 60364-4-42:
2010, IDT)
GB/T 16895:3-2017 Low-voltage electrical installations Part 5-54: Selection and installation of electrical equipment Grounding configuration and protective conductors
Body (IEC 60364-5-54:2011, IDT)
GB/T 16895:4-1997 Electrical installations for buildings - Part 5: Selection and installation of electrical equipment Chapter 53: Switchgear
and control equipment (IEC 364-5-53:1994, IDT)
GB/T 16895:5-2012 Low-voltage electrical installations Part 4-43: Safety protection Overcurrent protection (IEC 60364-4-43:
2008, IDT)
GB/T 16895:6-2014 Low-voltage electrical installations Part 5-52: Selection and installation of electrical equipment and wiring systems
(IEC 60364-5-52:2009, IDT)
GB/T 16895:7-2021 Low-voltage electrical installations Part 7-704: Requirements for special installations or locations Construction and demolition locations
Electrical installations (IEC 60364-7-704:2017, IDT)
GB/T 16895:8-2010 Low-voltage electrical installations Part 7-706: Requirements for special installations or places where activities are restricted
Conductive places (IEC 60364-7-706:2005, IDT)
GB/T 16895:9-2000 Electrical installations of buildings - Part 7: Requirements for special installations or places Section 707: Data office
Grounding requirements for electrical installations for management equipment (IEC 60364-7-707:1984, IDT)
GB/T 16895:10-2021 Low-voltage electrical installations Part 4-44: Safety protection against voltage disturbance and electromagnetic disturbance protection
(IEC 60364-4-44:2018, IDT)
GB/T 16895:13-2012 Low-voltage electrical installations Part 7-701: Requirements for special installations or places equipped with bathtubs and showers
places (IEC 60364-7-701:2006, IDT)
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 42325-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 42325-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 42325-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 42325-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|