HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 42086.2-2022 English PDF

US$429.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 42086.2-2022: Connections for hydraulic fluid power - Flange connections - Part 2: Series of 42 MPa, DN13 to DN76
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 42086.2-2022English429 Add to Cart 4 days [Need to translate] Connections for hydraulic fluid power - Flange connections - Part 2: Series of 42 MPa, DN13 to DN76 Valid GB/T 42086.2-2022

PDF similar to GB/T 42086.2-2022


Standard similar to GB/T 42086.2-2022

GB/T 42155   GB/T 40565.3   GB/T 40565.2   GB/T 42086.3   GB/T 42087   GB/Z 42085   

Basic data

Standard ID GB/T 42086.2-2022 (GB/T42086.2-2022)
Description (Translated English) Connections for hydraulic fluid power - Flange connections - Part 2: Series of 42 MPa, DN13 to DN76
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard J20
Classification of International Standard 23.100.40
Word Count Estimation 22,226
Date of Issue 2022-12-30
Date of Implementation 2022-12-30
Issuing agency(ies) State Administration for Market Regulation, China National Standardization Administration

GB/T 42086.2-2022: Connections for hydraulic fluid power - Flange connections - Part 2: Series of 42 MPa, DN13 to DN76


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 23.100.40 CCSJ20 National Standards of People's Republic of China Hydraulic transmission connection flange connection Part 2.42MPa, DN13~DN76 series Part 2.Seriesof42MPa,DN13toDN76 (420bar),DN13toDN76,MOD] Released on 2022-12-30 Implemented on 2022-12-30 State Administration for Market Regulation Released by the National Standardization Management Committee

table of contents

Preface III Introduction V 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 Material 2 5 Selection 2 6 Dimensions and tolerances 3 7 Surface requirements 3 8 Pressure/Temperature Requirements4 9 mark 4 10 Naming of flange joints and parts 4 Appendix A (informative) Recommended installation procedures and thread torques for flanged connections in accordance with this document11 Appendix B (informative) O-ring code and size 13 Reference 14

foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents" drafting. This document is part 2 of GB/T 42086 "Flanged Connections for Hydraulic Transmission Connections". GB/T 42086 has issued the following part. ---Part 1.3.5MPa~35MPa, DN13~DN127 series; --- Part 2.42MPa, DN13~DN76 series. This document is modified to adopt ISO 6162-2.2018 "Hydraulic transmission belt split or integral flange clamp, using metric or inch thread Flange Connections Part 2.Flange Connections, Oil Ports, Mounting Surfaces for 42MPa (420bar), DN13~DN76". The technical differences between this document and ISO 6162-2.2018 and their reasons are as follows. --- Replaced ISO 5598 (see Chapter 3, Table 1, Table 2) with the normatively quoted GB/T 17446 to adapt to my country's technical regulations components to improve operability; --- ISO 4762, GB/T 3098.1 replaced ISO 898-1, GB/T 5783 replaced by GB/T 70.1 with normative references Changed ISO 4017 (see 4.3) to adapt to my country's technical conditions and improve operability; --- Replaced ISO 3601-3 (see 4.4) with the normatively quoted GB/T 3452.2 to adapt to my country's technical conditions and improve operability active; --- Replaced ISO 48 (see 4.4) with the normatively quoted GB/T 6031 to adapt to my country's technical conditions and improve operability; --- Replaced ISO 7089 (see 4.6, Table 2) with the normatively quoted GB/T 97.1 to adapt to the technical conditions of our country and improve the reliability operability; --- Replaced ISO 2768-1 (see 6.6) with the normatively quoted GB/T 1804 to adapt to my country's technical conditions and improve operability active; --- Replaced ISO 9227 (see 7.1, 7.2) with the normatively quoted GB/T 10125 to adapt to my country's technical conditions and improve reliability operability; --- Replaced ISO 1302 (see 7.7, Figure 6) with the normatively quoted GB/T 131 to adapt to my country's technical conditions and improve operability active; --- Replaced ISO 19879 (see 8.1) with the normatively quoted GB/T 26143 to adapt to my country's technical conditions and improve operability active; --- Increased the marking requirements of DN25 type 2 (imperial) FC and FCS flange clamps (see 9.2) to adapt to the technical conditions of our country, Improve operability; --- Added the marking requirements for the oil port mounting surface of type 2 (inch) flange connection (see 9.3) to adapt to the technical conditions of our country and improve Operability; ---Changed the naming rules of split flange clamps (see 10.1) to adapt to the technical conditions of our country and improve operability; --- Changed the nomenclature of the integral flange clamp (see 10.2) to adapt to the technical conditions of our country and improve operability; --- Replaced ISO 261 (see Table 1) with the normatively quoted GB/T 193 to adapt to my country's technical conditions and improve operability; --- Replaced ISO 724 (see Table 1) with the normatively quoted GB/T 196 to adapt to my country's technical conditions and improve operability; --- Replaced ISO 263 (see Table 2) with the normatively quoted GB/T 20670 to adapt to my country's technical conditions and improve operability active. The following editorial changes have also been made to this document. ---Change the name of the standard to "Hydraulic Transmission Connection Flange Connection Part 2.42MPa, DN13~DN76 Series"; --- Deleted the note in 9.1. Please note that some contents of this document may refer to patents. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed by China Machinery Industry Federation. This document is under the jurisdiction of the National Hydraulic Pneumatic Standardization Technical Committee (SAC/TC3). This document was drafted by. Ningbo Institute of Product and Food Quality Inspection (Ningbo Fiber Inspection Institute), Hefei Haiyuan Machinery Co., Ltd., Zhejiang Songqiao Pneumatic Hydraulic Co., Ltd., Zhejiang Suqiangge Hydraulic Co., Ltd., Zhejiang Higway Hydraulic Technology Co., Ltd., Ningbo Jiurong Hydraulic Equipment Co., Ltd., Sichuan Aerospace Fenghuo Servo Control Technology Co., Ltd., Eaton Hydraulics (Ningbo) Co., Ltd., Guangdong Hengxinya Technology Co., Ltd., Beijing Machinery Industry Automation Research Institute Co., Ltd. The main drafters of this document. Zheng Zhijian, Wang Yangding, Shen Sihai, Lou Zhongyu, Luo Xuerong, Wang Yongchao, Chen Ke, Chen Yi, Yu Jijian, Huang Qiongfang, Cao Qiaohui, Luo Jing.

Introduction

In the hydraulic system, the flanged pipe joint is an important hydraulic component for pipeline connection, which not only requires safety, reliability and no leakage, but also requires Realize serialization and standardization. GB/T 42086 aims to standardize the general requirements and dimensions of flange connections, and is intended to be composed of three parts. ---Part 1.3.5MPa~35MPa, DN13~DN127 series. The purpose is to determine the pressure of 3.5MPa~35MPa, etc. Flanges for two-piece and one-piece flange clip-type hard pipe joints and hose joints (DN13~DN127) for four-screw fastening general requirements and Dimensional specifications, as well as the size of the sealing ring and sealing groove used together. --- Part 2.42MPa, DN13~DN76 series. The purpose is to determine the pressure level of 42MPa, which is used for four-screw fastening One-piece and one-piece flange clamp type hard pipe joints and flange heads of hose joints (DN13~DN76), split flange clamps (FCS and FCSM), one-piece flange clamps (FC and FCM), general requirements and dimensional specifications for oil ports and mounting surfaces, and the associated Dimensions of seal ring and seal groove. --- Part 3.42MPa, DN25~DN80 square series. The purpose is to determine the square flange with 42MPa pressure rating (DN25~DN80) general requirements and size specifications, as well as the size of the sealing ring and sealing groove used together. Hydraulic transmission connection flange connection Part 2.42MPa, DN13~DN76 series

1 Scope

This document specifies the method for hard pipe joints and hose joints (DN13~DN76) of the four-screw fastening flange clamp type at 42MPa. General requirements and dimensions for flange heads, split flange clamps (FCS and FCSM), integral flange clamps (FC and FCM), ports and mounting surfaces; also It specifies the requirements and dimensions of the sealing rings and sealing grooves used together. This document applies to connections for hydraulic systems of industrial and commercial products where threaded pipe joints are not convenient. Note. This document recommends the use of metric thread fasteners (type 1, DN13~DN76), and also provides the use of existing inch thread fasteners (type 2, DN13~DN76). DN51) method.

2 Normative references

The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document. GB/T 70.1 Hexagon socket head cap screws (GB/T 70.1-2008, ISO 4762.2004, MOD) GB/T 97.1 Flat Washer Grade A (GB/T 97.1-2002, eqvISO 7089.2000) GB/T 131 Product Geometry Technical Specification (GPS) Representation of Surface Structure in Technical Product Documentation (GB/T 131-2006, ISO 1302.2002, IDT) GB/T 193 Common thread diameter and pitch series (GB/T 193-2003, ISO 261.1998, MOD) GB/T 196 Basic dimensions of ordinary thread (GB/T 196-2003, ISO 724.1993, MOD) GB/T 1804 General tolerances Tolerances of linear and angular dimensions without tolerances (GB/T 1804-2000, eqvISO 2768-1. 1989) GB/T 3098.1 Mechanical properties of fasteners Bolts, screws and studs (GB/T 3098.1-2010, ISO 898-1.2009, MOD) GB/T 3452.2 O-ring rubber seals for hydraulic and pneumatic use Part 2.Specifications for inspection of appearance quality (GB/T 3452.2-2007, ISO 3601-3.2005, IDT) GB/T 5783 Hexagon head bolts with full thread (GB/T 5783-2016, ISO 4017.2014, MOD) GB/T 6031 Determination of hardness of vulcanized rubber or thermoplastic rubber (10IRHD~100IRHD) (GB/T 6031-2017, ISO 48.2010, IDT) GB/T 10125 Artificial atmosphere corrosion test Salt spray test (GB/T 10125-2021, ISO 9227.2017, MOD) GB/T 17446 Vocabulary for fluid transmission systems and components (GB/T 17446-2012, ISO 5598.2008, IDT) GB/T 20670 Unified thread diameter and thread number series (GB/T 20670-2006, ISO 263.1973, MOD) GB/T 26143 Test method for hydraulic pipe joints (GB/T 26143-2010, ISO 19879.2010, IDT) ISO 725 ISO inchscrewthreads-Basicdimensions ISO 3601-1 O-rings for fluid power systems - Part 1.Bore diameter, cross-section, tolerances and designations (Fluidpowersys- Note. GB/T 3452.1-2005 O-ring rubber seals for hydraulic and pneumatic use Part 1.Dimension series and tolerances (ISO 3601-1.2002, MOD)

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 42086.2-2022_English be delivered?

Answer: Upon your order, we will start to translate GB/T 42086.2-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 42086.2-2022_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 42086.2-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.