|
US$1159.00 · In stock
Delivery: <= 8 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 41984-2022: Procedure method for arc stud welding
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 41984-2022 | English | 1159 |
Add to Cart
|
8 days [Need to translate]
|
Procedure method for arc stud welding
| Valid |
GB/T 41984-2022
|
PDF similar to GB/T 41984-2022
Basic data | Standard ID | GB/T 41984-2022 (GB/T41984-2022) | | Description (Translated English) | Procedure method for arc stud welding | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J33 | | Classification of International Standard | 25.160.10 | | Word Count Estimation | 55,572 | | Date of Issue | 2022-10-12 | | Date of Implementation | 2022-10-12 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 41984-2022: Procedure method for arc stud welding---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Procedure method for arc stud welding
ICS 25.160.10
CCSJ33
National Standards of People's Republic of China
Arc stud welding process
Released on 2022-10-12
2022-10-12 Implementation
State Administration for Market Regulation
Released by the National Standardization Management Committee
table of contents
Preface I
1 Scope 1
2 Normative references 1
3 Terms and Definitions 2
4 Symbols and abbreviations3
5 Technical Review 4
6 welder 4
7 equipment 4
8 Process scheme 5
9 Welding procedure specification 5
10 Welding procedure qualification 8
11 Test and inspection 13
12 Acceptance Criteria 18
13 Process measures 19
14 Process Control 19
Appendix A (informative) Arc stud welding process 22
Appendix B (Normative) Quality Requirements for Arc Stud Welding 39
Appendix C (Informative) Manufacturer's Welding Procedure Specification (WPS) 40
Appendix D (informative) Welding procedure qualification report format 41
Appendix E (Informative) Production Test Results Report 44
Appendix F (informative) Welding procedure qualification report format 46
Appendix G (Informative) Production Test Results Report 48
Appendix H (Informative) Production Supervision Record Example 50
Reference 51
foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents"
drafting.
This document is modified to adopt ISO 14555.2017 "Arc stud welding of metal materials for welding".
Compared with ISO 14555.2017, the structure of this document has been adjusted, and the positions of Appendix E and Appendix F have been reversed.
There are technical differences between this document and ISO 14555.2017.The main technical differences and their reasons are as follows.
--- In order to adapt to the technical conditions of our country, the scope has been modified (see Chapter 1);
--- Regarding the normative reference documents, this document has made adjustments with technical differences to adapt to the technical conditions of our country, specific adjustments
as follows.
● Replace ISO 4063 with GB/T 5185 (see Chapter 3, 6.1, 9.4, Table A.1, Table A.2);
● Replace ISO 3834-1 with GB/T 12467.1 (see Chapter 3);
● Replace ISO 14731 with GB/T 19419 (see Chapter 3, 6.2);
● Replace ISO 14732 with GB/T 19805 (see Chapter 3, 6.1);
● Replaced ISO 15607 with GB/T 19866 (see Chapter 3);
● Replace ISO 3834-2 with GB/T 12467.2 (see Chapter 5, 6.2, 7.3, Table 1, 12.1, 12.4, 14.8, Table B.1);
● Replace ISO 3834-3 with GB/T 12467.3 (see Chapter 5, 6.2, 7.3, Table 1, 12.1, 12.4, 14.8, Table B.1);
● Replace ISO 3834-4 with GB/T 12467.4 (see Chapter 5, 6.2, 7.3, Table 1, 12.1, 14.8, Table B.1);
● Replace ISO 6947 with GB/T 16672 (see 9.5.2, 10.2.8.10, A.2.1.2);
● Replace ISO 14175 with GB/T 39255 (see 9.7.2, A2.1.3);
● Replace ISO 15613 with GB/T 19868.4 (see 10.3.1, 14.7);
● Replace ISO 15611 with GB/T 19868.2 (see 10.4);
● Replace ISO 13918 with GB/T 902.2 (see 11.2, 12.4, A2.4.1, A2.4.2);
● Replace ISO 17636-1 with GB/T 3323.1 (see 11.7);
● Replace ISO 17636-2 with GB/T 3323.2 (see 11.7);
● Replace ISO 9606-1 with GB/T 15169 (see 14.7);
● Replace ISO 9606-2 with GB/T 24598 (see 14.7).
The following editorial changes have been made to this document.
---Change the name of the standard to "Arc Stud Welding Process Method";
--- Deleted terms and definitions that do not appear in the standard text.
Please note that some contents of this document may refer to patents. The issuing agency of this document assumes no responsibility for identifying patents.
This document is proposed and managed by the National Welding Standardization Technical Committee (SAC/TC55).
This document is drafted by. Harbin Welding Research Institute Co., Ltd., Zhuzhou Huaxin Precision Industry Co., Ltd., Anhui Fuhuang Steel Structure Co., Ltd.
Co., Ltd., Guangdong Huahui Elevator Parts Co., Ltd., Xiamen Kunjin Electronic Technology Co., Ltd., Shanghai Huayi Construction Co., Ltd., Henan Province
Boiler and Pressure Vessel Safety Testing Institute Luoyang Branch, CRRC Qingdao Sifang Co., Ltd., Guangdong Tigerway Robot Technology
Co., Ltd., Panshi Heavy Industry (Qingdao) Co., Ltd., CRRC Zhuzhou Electric Co., Ltd., State Grid Jiangsu Electric Power Co., Ltd. Zhenjiang Power Supply
branch.
The main drafters of this document. Su Jinhua, Yang Yuting, Xie Junhui, Wang Qian, Shen Wanyu, Shen Zheng, Liu Ying, Tang Zimou, Han Xiaohui, Cao Yukun,
Lu Xiaochun, Xu Liang, Lin Xiaohui, Li Guojun, Liang Yongfeng, Liu Xiang, Lu Xinjian, Li Shuaizhen, Zhou Peng, Fu Jianhua, Lu Ansong.
Arc stud welding process
1 Scope
This document describes the method of arc stud welding and specifies the welding technique review, personnel and equipment, welding procedure plan, welding procedure specification
Relevant requirements such as procedures, welding procedure qualification, test inspection and acceptance criteria.
This document applies to arc stud welding of metallic materials.
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references
For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
this document.
GB/T 902.2 Welding studs for arc stud welding (GB/T 902.2-2010, ISO 13918.2008, MOD)
GB/T 3323.1 Radiographic testing for non-destructive testing of welds - Part 1.X-ray and gamma-ray film techniques (GB/T 3323.1-
2019, ISO 17636-1.2013, MOD)
GB/T 3323.2 Radiographic testing for non-destructive testing of welds - Part 2.X and gamma ray techniques using digital detectors
(GB/T 3323.2-2019, ISO 17636-2.2013, MOD)
GB/T 3375 Welding Terminology
GB/T 5185 Welding and related process codes (GB/T 5185-2005, ISO 4063.1998, IDT)
GB/T 12467.1 Quality requirements for fusion welding of metallic materials - Part 1.Selection criteria for corresponding grades of quality requirements (GB/T 12467.1-
2009, ISO 3834-1.2005, IDT)
GB/T 12467.2 Quality requirements for fusion welding of metal materials Part 2.Complete quality requirements (GB/T 12467.2-2009, ISO 3834-2.
2005, IDT)
GB/T 12467.3 Quality requirements for fusion welding of metal materials Part 3.General quality requirements (GB/T 12467.3-2009, ISO 3834-3.
2005, IDT)
GB/T 12467.4 Quality requirements for fusion welding of metallic materials Part 4.Basic quality requirements (GB/T 12467.4-2009, ISO 3834-4.
2005, IDT)
GB/T 15169 Steel Fusion Welding Welder Skills Assessment (GB/T 15169-2003, ISO 9606-1.2002, IDT)
GB/T 15579.1 Arc welding equipment Part 1.Welding power supply (GB/T 15579.1-2013, IEC 60974-1.2005, IDT)
GB/T 16672 Definition of inclination and rotation angle of welding seam working position (GB/T 16672-1996, ISO 6947.1990, IDT)
GB/T 19419 Welding Management Tasks and Responsibilities (GB/T 19419-2003, ISO 14731.1997, IDT)
GB/T 19805 Skills Assessment of Welding Operators (GB/T 19805-2005, ISO 14732.1998, IDT)
GB/T 19866 Welding procedure specification and general principles for qualification (GB/T 19866-2005, ISO 15607.2003, IDT)
GB/T 19868.2 Procedure qualification based on welding experience (GB/T 19868.2-2005, ISO 15611.2003, IDT)
GB/T 19868.4 Procedure qualification based on pre-production welding test (GB/T 19868.4-2005, ISO 15613.2004, IDT)
GB/T 24598 Welder skills assessment for fusion welding of aluminum and aluminum alloys (GB/T 24598-2009, ISO 9606-2.2004, MOD)
GB/T 39255 Shielding gas for welding and cutting (GB/T 39255-2020, ISO 14175.2008, MOD)
system)
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 41984-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 41984-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 5 ~ 8 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 41984-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 41984-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|