HOME   Cart(5)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 41977-2022 English PDF

US$909.00 ยท In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 41977-2022: Packaging - Labelling and direct product marking with linear bar code and two-dimensional symbols
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 41977-2022English909 Add to Cart 7 days [Need to translate] Packaging - Labelling and direct product marking with linear bar code and two-dimensional symbols Valid GB/T 41977-2022

PDF similar to GB/T 41977-2022


Standard similar to GB/T 41977-2022

GB/T 42368   GB/T 41854   GB/T 39093   GB/T 45215   GB 12268   

Basic data

Standard ID GB/T 41977-2022 (GB/T41977-2022)
Description (Translated English) Packaging - Labelling and direct product marking with linear bar code and two-dimensional symbols
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard A80
Classification of International Standard 35.040
Word Count Estimation 50,569
Date of Issue 2022-10-14
Date of Implementation 2022-10-12
Issuing agency(ies) State Administration for Market Regulation, China National Standardization Administration

GB/T 41977-2022: Packaging - Labelling and direct product marking with linear bar code and two-dimensional symbols


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Packaging -- Labelling and direct product marking with linear bar code and two-dimensional symbols ICS 35.040 CCSA80 National Standards of People's Republic of China Packaging 1D and 2D barcode labels and direct product marking Published on 2022-10-12 2022-10-12 Implementation State Administration for Market Regulation Released by the National Standardization Administration directory Preface III Introduction V 1 Scope 1 2 Normative references 1 3 Terms, Definitions and Abbreviations 2 3.1 Terms and Definitions 2 3.2 Abbreviations 3 4 Requirements 3 4.1 Identification 3 4.1.1 General 3 4.1.2 Product identification3 4.1.3 Batch identification 3 4.2 General Requirements for Data Format 3 4.2.1 General 3 4.2.2 General format 3 4.2.3 Required data field 4 4.2.4 Optional data fields 8 4.2.5 Syntax 9 4.3 Layout and positioning 10 4.3.1 Layout 10 4.3.2 Positioning 10 4.3.3 Title of 1D barcode 10 4.3.4 Human-readable characters 10 4.4 Symbol requirements10 4.4.1 Recommendations for the use of symbologies 10 4.4.2 1D barcode symbol requirements 11 4.4.3 2D barcode symbol requirements 12 4.5 Paste Requirements 16 Appendix A (Informative) Serialization of Partial Electronic Products 17 Appendix B (Informative) Some Commonly Used Identifiers 23 Appendix C (Informative) GB/T 1988 Character Set (Hexadecimal and Decimal) 24 Appendix D (informative) ISO /IEC 15434 Data Syntax Implementation Guide 26 Appendix E (informative) ISO /IEC 15459IACs Registration 27 Appendix F (informative) Application of 39 barcode and 128 barcode symbology 28 Appendix G (Informative) Application of DUNS Code and DI in 1D Barcode and 2D Barcode 31 Appendix H (Informative) Label Adhesion Characteristics and Mark Durability 33 Appendix I (informative) Mode 36 Internal Service Code Check Character Algorithm 40 Reference 42

foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" drafted. This document is modified to adopt ISO 28219.2017 "Labeling and direct product marking of 1D and 2D barcodes on packaging". This document has the following structural adjustments compared to ISO 28219.2017. --- Added abbreviations, adjusted the term GTIN to an abbreviation, and added EDIFACT to an abbreviation (see 3.2); --- Changed the numbering of the entries in 4.4.2, since there are overhanging segments in 4.4.2 in ISO 28219.2017, the overhanging segments are numbered For 4.4.2.1, the subsequent entries are modified in turn; ---4.2.2.2, 4.2.2.3, 4.2.4, 4.4.3.1 are the parts of ISO 28219.2017 4.2.2.2, 4.2.2.3, 4.2.4, The paragraphs in 4.4.3.1 are sorted and merged to be more in line with the expression of Chinese language description; ---4.4.3.1 corresponds to 4.4.3.1, 4.4.3.2.1, 4.4.3.2.8, 4.4.3.4.1, 4.4.3.4.8 and 4.4.3.5.1 in ISO 28219.2017; ---Appendix H corresponds to Appendix A in ISO 28219.2017, Appendix E corresponds to Appendix G and Appendix F in ISO 28219.2017 Corresponds to Annex E in ISO 28219.2017, Annex G corresponds to Annex F in ISO 28219.2017, Annex A corresponds to Annex H in ISO 28219.2017. The technical differences between this document and ISO 28219.2017 and their reasons are as follows. --- Changed the description of the scope, adjusted the scope in ISO 28219.2017 to the introduction except "applies to" section (see Introduction and Chapter 1). ---Added GB/T 4122 (all parts), GB/T 8170, GB 12904, GB/T 12905, GB/T 17172, GB/T 21049 and GB/T 37056 (see Chapter 2) to adapt to the technical conditions of our country. --- Changed normative references, ISO /IEC 16388 was changed to GB/T 12908, ISO /IEC 15416 was changed to GB/T 14258, ISO /IEC 15415 are changed to GB/T 23704, the degree of consistency of these documents is adopted for modification; ISO /IEC 18004 is changed to GB/T 18284, and the degree of consistency of these two documents is non-equivalent; ISO /IEC 15417 is changed to Changed to GB/T 18347, the degree of consistency of these two documents is equivalent; part of the "GS1 General Specification" is changed to GB/T 15425 and GB/T 16986, the degree of consistency between some contents of "GS1 General Specification" and GB/T 15425 is modified Adopted, the degree of consistency between some contents of "GS1 General Specification" and GB/T 16986 is non-equivalent, in order to adapt to my country's technical regulations components to improve operability (see Chapter 2). --- Delete the term "cell" and add "module", which is more consistent with the description of domestic professional fields in my country (see 3.1). --- Delete the term "DUNS code", because it has no directivity, it is applied to the nine-digit number of enterprise identification, business information organization and collation The coding system is not all about DUNS codes. --- Deleted the term "one-level/modular component" because it constitutes a circular definition with "component" and the domestic coding system does not use this expression. --- Deleted the term "product", there is ambiguity in the interpretation of the original text. ---Added the expression method of measuring aperture in the "Printing Quality" clause, using mil is more convenient to measure and use, no need to convert (see 4.4.2.6, 4.4.3.2.6 and 4.4.3.5.5). --- Delete the provisions of visible light range (660nm), GB/T 14258 has detailed provisions on wavelength. --- Deleted the related content of MicroPDF417, this kind of label is not used in China. ---Add the relevant content of Chinese letter code (see 4.4.3.1 and 4.4.3.3), because Chinese letter code is used more in China, it is in line with the domestic two-dimensional code code requirements. ---Remove the relationship between the US Department of Defense (DoD) and the North Atlantic Treaty Organization (NATO) in 4.2.3.2 of ISO 28219.2017 off data. --- Deleted the relevant data of the Health Industry Business Communication Committee (HIBCC) in 4.2.3.4 of ISO 28219.2017 to suit my national conditions. The following editorial changes have been made to this document. --- Deleted ISO /IEC 15418 and ISO /IEC 15424 in the references and added them to normative references (see Section 2 Chapter), which is a change to comply with the requirements of the requirements clauses in GB/T 1.1-2020; --- Corrected footnote a of Table A.1 in ISO 28219.2017, deleted footnote b, and deleted footnote b of Table A.2; --- Deleted the US Department of Defense (DoD) and NATO in Appendix B and Appendix E of ISO 28219.2017 (NATO) related data; --- Delete the example "1P" in G.2 in ISO 28219.2017, there is no corresponding schematic diagram in the text; --- Deleted a) in H.3.4.8 of ISO 28219.2017, because the products that can be used for testing are not unique and do not need to involve specific companies product. Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed and managed by the National Packaging Standardization Technical Committee (SAC/TC49). This document is drafted by. China Packaging Research and Testing Center, Xiamen Product Quality Supervision and Inspection Institute [National Semiconductor Light-emitting Device Application Product Quality Supervision and Inspection Center, National Field (Factory) Motor Vehicle Quality Supervision and Inspection Center], China Article Numbering Center, Xiamen Standardization Research Institute, Shenzhen Shenda Aurora Technology Co., Ltd., Xianju County Hongxin Packaging Co., Ltd., Zhongshan Torch Vocational and Technical College, Zhongbao Packaging Research Institute Research Institute Co., Ltd. The main drafters of this document. Chen Zhenqiang, Zheng Jing, Luo Yan, Liu Hui, Huang Yanyan, Cao Jizhong, Gao Yanfei, Ying Jianbin, Jiang Xiaojian, Wang Yufeng, Zhao Sufen, Meng Jie, Zhang Jianan, Liu Long, Yan Ruoyun, Zhong Yunfei, Sun Huifang, Lin Jie.

Introduction

This document provides a method for marking products, parts and components using fixed or hand-held scanning on manufacturer equipment, or To be used by the customer who purchased the product for subsequent manufacturing or for end use. Can be used for inventory, distribution, manufacturing, quality control, purchasing, Supply chain processes such as transportation, supply, repair and handling. To enable all trading partners to use labels in internal management and supply chains, there are Common techniques, data structures, consistency, and applicability of the necessary specification label usage. There are many standards for product labeling and marking, each Each standard is developed to meet the requirements of a specific industry. For efficient and economical use within and across industries, it is necessary to Develop a common standard across industries. 1D or 2D barcodes on products or parts used to identify products, parts and assemblies machine readable and human readable direct product The marked content also contains other information agreed between trading partners. Labels and direct product labels for such barcodes and other standardized documents The requirements in mind can be combined into one label for use, or can be used alone, which helps to achieve automated management. Paste Location and Use of Markers The method is self-negotiated between suppliers, manufacturers and trading partners. This document is designed to meet minimum packaging requirements for various industries and does not replace or supersede any marking or labelling provisions applicable to safety or regulation. Therefore, it can be widely applied to various industries, and these industries can develop specific implementation guidelines for this document. In this document, DI is derived from ANSMH10.8.2 (ASC MH10), abbreviated as DI; AI is derived from GS1AI, abbreviated as AI. ISO /IEC 15418 adopts GS1AI and ASCMH10DI; GB/T 16986 adopts ISO /IEC 15418.128 barcodes are one GS1-128 barcode is an application subset of 128 barcodes. The graphics provided in this document are examples only and may not correspond to actual scale and quality requirements. Packaging 1D and 2D barcode labels and direct product marking

1 Scope

This document specifies the requirements for labelling and direct product marking of packaging with 1D barcodes and 2D barcodes. This document applies to processes such as production, inventory, distribution, field service, sales, maintenance, repair, etc. It also applies to automotive, aerospace, Chemical, consumer, electronics, medical, marine, railway and telecommunications industries.

2 Normative references

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document. GB/T 4122 (all parts) packaging terms GB/T 8170 Numerical Rounding Rules and Representation and Judgment of Limit Values GB 12904 Commodity barcode retail commodity coding and barcode representation (GB 12904-2008, ISO /IEC 15420.2000, NEQ) GB/T 12905 Barcode Terminology GB/T 12908 Information Technology Automatic Identification and Data Acquisition Technology Barcode Symbol Specification Three Nine Barcode (GB/T 12908- 2002, ISO /IEC 16388.1999, MOD) GB/T 14258 Information Technology Automatic Identification and Data Acquisition Technology Barcode Symbol Printing Quality Inspection (GB/T 14258- 2003, ISO /IEC 15416.2000, MOD) GB/T 15425 Commodity barcode 128 barcode GB/T 16986 Commodity barcode application identifier (GB/T 16986-2018, ISO /IEC 15418.2016, NEQ) GB/T 17172 417 barcode GB/T 18284 Fast Response Matrix Code (GB/T 18284-2000, neqISO /IEC 18004.2000) GB/T 18347 128 barcode (GB/T 18347-2001, idtISO /IEC 15417.2000) GB/T 21049 Hanxin code GB/T 23704 Inspection of printing quality of two-dimensional barcode symbols (GB/T 23704-2017, ISO /IEC 15415.2011, MOD) GB/T 37056 Item Coding Terms ISO /IEC 15418 Information Technology Automatic Identification and Data Acquisition Technology GS1 Application Identifier and ASCMH10 Data Label Note. GB/T 16986-2018 Commodity barcode application identifier (ISO /IEC 15418.2016, NEQ) ISO /IEC 15424 Information technology automatic identification and data acquisition technology Data carrier identifiers (including semiotic identifiers) ISO /IEC 15434 Information technology automatic identification and data acquisition technology Arrangement of high-capacity ADC media (Information media)

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 41977-2022_English be delivered?

Answer: Upon your order, we will start to translate GB/T 41977-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 7 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 41977-2022_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 41977-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.